C.J.&#039;s Corner Scraps

In addition to the April Cards, Tags, & More Kit & Mixed Media Kit (*from previous Tres Jolie Kits), I used:

*Tonic Nuvo Embellishment Mousse: “Coral Calypso” & “Mother of Pearl;” Tim Holtz tiny Attacher; Finnabair 3D Matte Gel; We R Memory Keepers Corner Chomper; Fiskars 1” Circle Punch; cardstock; Ranger Heat-It Tool; wax & wax seal stamps; bookbinding thread & needle; awl; foam mat; hair tie; large paperclips; fabric flowers; LineCo PVA Glue; Aleene’s Tacky Glue; UHU Stic; random scrap fabric; tulle; black & white threads; buttons; hot glue

Tres Jolie Kit Club–Mini Tag Booklet-April 2022 Cards, Tags, & More Kit

April 21, 2022April 20, 2022 | Corner Scraps

Hey, y’all! Welcome back to the Corner Scraps Blog!

This week I used the April Cards, Tags, & More Kit from Tres Jolie Kit Club to create a Mini Tag Booklet. I assure you, it looks more “complicated” than it was. I grabbed up some bits of fabric and eyelets from my stash, my Mini-Cinch & wire, and some punches to put this little booklet together. Check out the video to see how it came along!

Tag pages created from the envelopes and cards, holding tags from the tag pack!

Video:

Front & back:

I used some light sage thread for my page edges, pink, green, and orange eyelets, and some rust & green fabric bits for tabs and through the eyelets. The booklet is bound together with some orange We R Memory Keepers binding wire (.625-inch). I also added on the front cover phrase & “stitch” rub-ons.

There isn’t really a lot of “extras” in this project – stitching, fabric, eyelets, punches, & binding – the rest comes from this month’s kit! I cut up a couple of the envelopes, leaving some of the flaps to make pockets, or cut down some of the cards and stitched them together. To reinforce my edges and add some texture and decoration, I added some decorative stitches with my sewing machine.

Some pages were a combination of cards or envelopes to make the pocket pages. I used my We R Memory Keepers “Tab” punch to make some of the tabs, and I created a little pocket and used my circle punch to make a thumb hole. Some of the pages, like the third one in the above table, have double pockets!

I couldn’t forget to add in some of the flowers from this month! I used the rub-on leaves, popped on the flowers, and added some JudiKins Diamond Glaze to the centers to help protect them.

Thank you for joining me here in my corner, I hope you enjoyed this Tag Booklet and it gave you some ideas of what can be made using this month’s Tres Jolie Cards, Tags, & More Kit!

Stay Crafty, Friends

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Corner Scraps can be found at the following places:

In addition to this month’s Cards, Tags, & More Kit, I used:

We R Memory Keepers: Mini Cinch, Binding Wires (Orange, 0.625”), Tab Punch, 3-way Corner Punch, Crop-A-Dile; & Crop-A-Dile Corner Chomper; Fiskars 1-1/2” Circle Punch; Light Sage Thread; UHU Stic; JudiKins Diamond Glaze; eyelets; fabric scraps

Tres Jolie Kit Club–Gel Plate Printing!!!–April 2022 Mood Board

April 14, 2022April 13, 2022 | Corner Scraps

Hey, y’all! Welcome back to the Corner Scraps Blog!

This week I am focusing on the Mixed Media Kit from Tres Jolie Kit Club, and while I do make a few sample projects, my focus is really going to be on what a gel plate can do! I find gel printing to be incredibly addictive – I can sit for hours without noticing time passing while I peel paper after paper off.

I do manage to add some mood board inspiration as well. I love citrus, not so much eating or drinking (I don’t care for sour), but for reasons I can’t explain, I love how citrus fruits LOOK – so I made a cut file that finds its way onto the gel plate! Check out my video to see all the ways I used the gel printing plate and the mixed media kit this month.

Video:

April 2022 Moodboard:

April’s mood board challenge rules:

You can create any type of project for the challenge.
You MUST say what you were inspired by.
You MUST include the twist in your design.
The twist for this month is SPRINGTIME MADNESS.
We would love to see you USE AT LEAST 1 of Tres Jolie’s products on your projects but it isn’t required to play along.
It MUST be a new project.
Place your entries in the April 2022 challenge folder on the Tres Jolie Kit Club Cafe Facebook page. This challenge ends on April 30th, 2022 at 11:59 pm CST. All entries must be in this folder to be eligible for the prize (to have everyone eligible to win, we are limited the same winner to once every 3 months).

Papers:

Here are a couple images of some of my finished papers – of course by “finished” I mean from this session! I may or may not decide to add more in the future! You can see my Citrus Cut File (mostly) survived being used over and over again, and I now have some gel plate printed citrus slices!

Easter Eggs:

I just happened to come across a package of four wooden Easter Eggs in Wal-Mart, and decided they would be fun to use with the gel plate! If you saw my December 2021 Mixed Media Kit Project “Sleigh Bells,” then you already know I like to use more than paper on my gel plates! So I did it again, this time with some Easter Eggs.

The egg on the left is just multiple layers from gel printing, tipped off with some splatters from the Dina Wakley Gloss Sprays found in this month’s kit. The Egg on the right also has multiple layers, but I also used the Citrus Cut File on the gel plate and then came in and added some gel pen after it was all dry to really make the slices stand out!

For the “Spring” Egg, I used a flower-filled egg stencil I’ve had for years (no idea where it came from) and my Dina Wakley Spray to give some fun flowers to my gel printed background, then just grabbed a gel pen to add “Spring.” For the egg on the right, after my background layers were dry, I grabbed a white oil pastel to draw on some flowers! Oil pastels make a great resist, so I just added my Dina Wakley Gloss Sprays to color the stems and petals.

Envelopes:

Once your gel prints are dry, you can fold them up and create custom envelopes with your original papers! Well I used a sheet of regular printer paper for my examples, if I had started with envelopes in mind, I would have used some cardstock for my envelope prints, but I don’t always know where I’m headed when I do most projects, and this week was no exception!

I added a bit of the Citrus Cut File and I made some paper Easter Eggs to layer up. Fun to make, and I have some one-of-a-kind envelopes. I also want to add that after they are dry, the Glossy Sprays make great resists!

Backgrounds for my tag and ATC:

For the tag, I started tearing up some of my papers and layered them up, and added some Citrus slices using some Liquitex Matte Medium. After the matte medium was dry, I went back with my gel pens to add some accents to the rinds and scribbled on some flowers. I then came back with my glossy sprays and filled in the citrus slices. I can’t say this tag is “done”, but I wanted to do a little something that showed a few examples for layering and color. For my ATC, I grabbed up my Prima ATC blanks, some bits of the paper I had made, and glued them in place before taking it over to my sewing machine and adding some random “scribble” stitches. Then I came back and popped on a few chipboard pieces from my stash to complete the card.

Thank you for joining me here in my corner! I hope you enjoyed seeing some of the different ways a gel plate can be used for making your own custom prints—half the fun is in the experimentation!

Stay Crafty, Friends

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Tres Jolie can be found at the following places:

In addition to this month’s Mixed Media Kit (*from previous Tres Jolie Kits), I used:

Corner Scraps Studio: “Citrus” Cut File; *Jacquard Lumiere “Halo Violet Gold;” Dina Wakley Media: Heavy Body Acrylic Paint “Lemon,” *Acrylic Paint: “Tangerine” & “Lemon;” Vicki Boutin “Juicy Pear” Acrylic Paint; *FolkArt “Silver Sterling” Metallic Acrylic Paint; *DecoArt “Lavender” Acrylic Paint;” Apple Barrel “White” & “Pavement” Matte Acrylic Paint; *Tim Holtz Stencil: THMS117; Acrylic Paint Pens; Gel Press 8×10 & Petites; Ranger Heat-It Tool; We R Memory Keepers Envelope Punch Board; oil pastels; black Stabilo pencil; Sakura Pens (metallic, Moonlight, Soufflé, Glaze); Aen Art Pen (glitter); craft sticks (i.e. popsicle sticks, tongue depressors); cheese cloth; corrugated cardboard; vinyl sink mat; fabric flowers; wooden eggs; *Ranger Craft Tags; *Prima ATC Cards; Simple Stories “Good Vibes” Chipboard Stickers; Bella Blvd Ciao Chip “Adventure;” printer paper; craft foam sheets; string/yarn; hot glue gun & hot glue sticks; UHU Stic; Liquitex Matte Medium

Tres Jolie Kit Club–3 Cards, 3 “Difficulties”-April 2022 Cards, Tags, & More Kit

April 7, 2022April 6, 2022 | Corner Scraps

Hey, y’all! Welcome back to the Corner Scraps Blog!

Spring is here! Birds are chirping, butterflies are fluttering, and spring storms keep us on our toes!

For my first project of April, I have some sample cards; three cards, three “difficulties.” Check out my video below to see what I did to put them together.

The first card I make is a quick and easy card, using just the kit and a few bit of bling from my stash. The second card is a little more involved – I make a shaker card, and for the third card, I bring in the mixed media kit so I can talk about gel printing a little early in the month!

Video:

Quick & Easy Card:

For this card, I just grabbed up a couple of tags from the tag pack, added some foam dots to give a little lift, added a rub-on rose & the rub-on sentiment, and popped on a few flowers from the flower pack and some bling from my (hoarded) stash! I don’t think this card took even 5 minutes to complete!

Shaker Card:

For my shaker card, I cut out some foam circles to use as spacers and some heavy-duty clear packaging plastic to use as my shaker window. I have a rub-on under the shaker pieces, and I glued the flowers to the underside of the plastic! They are in the shaker, but they don’t move. My shaker pieces are some sequins and some chunky glitter.

Gel Print Card:

For my third and final card, I broke into this month’s mixed media kit and added some of the fabulous Dina Wakley Gloss Sprays to my card using the gel plate! I will be talking more about gel printing in other projects this month, but I wanted to get you going with a few little tips of what you can do with the sprays, paint, and gel plate from the mixed media kit.

I used the gel plate to make patches of color on my background and envelope, I turned the gel plate into a stamp pad so I could add some stamped text to my card front, and I went in with the Lime spray using my fingers as my brush on the envelope and added some Lime splatter to my card front. I have three tags layered for this card and tucked in a few flowers. It wasn’t a “hard” card to make, I merely consider it the more “difficult” of the three cards because there is more to be done to finish it! (Plus I bring in another of April’s Kits!)

Thank you for joining me here in my corner! I hope you enjoyed this project and it gave you some ideas for cards you can make using this month’s Cards, Tags, & More Kit. Keep an eye on the blog for more projects using this month’s kits!

Stay Crafty, Friends

Corner Scraps can also be found at:

In addition to this month’s Cards, Tags, & More Kit & Mixed Media Kit (*from previous Tres Jolie Kits), I used:

*Finnabair Stamp# 967000; *Prima “Pretty Pale” Say It In Crystals; *Twinklets Diamond Dust; *Buttons Galore & More “28 Lilac Lane;” Nuvo “Buttermilk” Crystal Drops; Recollections 2.5” Circle Punch; Ranger Heat-It Tool; Scotch ATG; Fabri-Tac; Art Glitter Glue; JudiKins Diamond Glaze; Foam Adhesive Squares & Dots; foam (or thick chipboard—something to use as “rings” for the shaker); unknown Easter Egg stencil

Tres Jolie Kit Club–April 2022 Kit Reveals!

April 1, 2022March 31, 2022 | Corner Scraps

It’s April 1st, and that means it’s Reveal Day for Tres Jolie Kit Club! Get yours before they’re gone!

We are starting to implement our new year changes, so make sure you are following us on all Social Media platforms and are a part of the Facebook Cafe that way you won’t miss a single announcement or project created with these kits.

April 2022 Scrapbooking Kit, Mixed Media Kit, and Cards, Tags, & More Kit:

The April 2022 Scrapbooking Kit is filled with gorgeous new papers from 49 & Market in beautiful peaches, pinks, and greens – as always, these papers will be amazing for all your upcoming projects, well beyond the initial spring feel. You will find a lovely assortment of patterned papers and perfectly coordinated embellishments.

Ever wanted to try your hand at gel printing? This month’s Mixed Media Kit contains a gel printing plate, brayer, paint, and sprays to get you going!

Our Cards, Tags, & More Kit is filled with more new papers from 49 & Market and goodness so you can create lovely cards and more. Who doesn’t like creating a variety of projects from one kit?

These kits are for the beginner to the advanced, clean and simple to mixed media maven. No matter your style, there is something for everyone. We know you are going to love it!

*Scrapbook Kit*

*Mixed Media Kit*

*Cards, Tags, and More Kit*

Don’t forget to stop by the Tres Jolie YouTube channel and see our video reveal of all our kits.

Love them, right?! You can still get one of your own (some kits are in very limited quantities). Become a subscriber and you will never miss out on our gorgeous, coordinated kits. Just visit Tres Jolie subscribe.

The designers at Tres Jolie have created some amazing layouts/projects with this kit.

Here is a little tease from me using this month’s Cards, Tags, & More Kit and Mixed Media Kit:

Please stop by the other designers’ blogs and check out their sneak peeks. They are listed below:

Rae Moses

Jeanne Rodriguez

Kim Heard

We have a new mood board challenge for the month. Here are the rules.

You can create any type of project for the challenge.
You MUST say what you were inspired by.
You MUST include the twist in your design.
The twist for this month is SPRINGTIME MADNESS.
We would love to see you USE AT LEAST 1 of Tres Jolie’s products on your projects but it isn’t required to play along.
It MUST be a new project.

Here is the April 2022 Mood Board:

Place your entries in the April 2022 challenge folder on the Tres Jolie Kit Club Cafe Facebook page. This challenge ends on April 30th, 2022 at 11:59 pm CST. All entries must be in this folder to be eligible for the prize (to have everyone eligible to win, we are limited the same winner to once every 3 months).

Don’t forget that Tres Jolie can be found in the following places:

All the designers will be revealing their projects on the Tres Jolie blog all month long. Make sure you join us for tons of inspiration, including video and photo tutorials. Also, make sure you check out our newest chipboard designs that were just added to the store.

Tres Jolie Kit Club – Altered Embroidery Hoops – March 2022 Cards, Tags, & More Kit

March 24, 2022March 23, 2022 | Corner Scraps

Hey, y’all! Welcome back to the Corner Scraps Blog!

For my final March project for the Tres Jolie Kit Club, I have some more décor – altered embroidery hoops. I have my 3-inch hoops secured with some E6000 to a paper-covered, paperclay base. I added some picture hanging wire to the clay while it was still wet, and sped up the drying process (some) by putting the clay in my oven (200°F) for 15 minute intervals.

Check out my video to see how I put this all together – aside from the dry times, it went together rather quickly. I actually got it all together in less than a full day because I was able to work with my clay base sooner than a full air-dry time would have allowed!

Video:

As you saw in the video, I rolled out some paperclay to make my base. While my base was drying, I started to get to work on my embroidery hoops. I cut my rice paper down to circles, and added “V” shaped notches along the edges so they would fold over better and make it easier to keep wrinkles out.

I added some Distress Crackle Paste to my hoops carefully since I already had the rice paper in, and added some along the edge of my paper-topped paperclay base. I hadn’t originally planned on adding the mica powder to the base, but once I saw the pink, I had to go with it!

I also added some of the crackle paste to the Tres Jolie Chipboard, and when my mediums were dry – it didn’t take long at all – I started layering the chipboard ephemera up after I got my hoops into place.

I used my Finnabair 3D Matte Gel to hold all of my embellishments in place – it’s great for adding lift to pieces – and because the 3D gel is so durable, I moved right into adding my flowers onto the project. After I had my flowers on, I decided they were just too white, so I added some of the ink from the ink pad in the kit mixed with some of the mica. I didn’t want to make the flowers completely pink, so I watered the mix down so it would create a light tint.

The final addition was a splattering of some watered down white gesso. Now that everything is 100% dry (it’s been a couple weeks since I set this on a wire shelf to finish drying!) I am adding some protective finishes and will be posting it up in my Etsy shop!

Thank you for joining me here in my corner. I hope you enjoyed this project – and all of this month’s projects – and were inspired to go out and create! Don’t forget next Friday is the first of the month and that means NEW KITS!!

Stay Crafty, Friends

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Corner Scraps can also be found at:

In addition to items from this month’s Cards, Tags, & More Kit and Mixed Media Kit (*from previous Tres Jolie Kits), I used:

*Tim Holtz Crackle Distress Texture Paste; Creative Paperclay; Finnabair 3D Matte Gel; Daler Rowney White Gesso; Fabri-Tac; E6000; Krylon Matte Finish; Ranger Heat-It Tool; 3” Embroidery Hoops; picture hanging wire; iron-on fabric interfacing

Tres Jolie Kit Club – Décor “Vintage” Spools -March 2022 Cards, Tags, & More Kit

March 17, 2022March 16, 2022 | Corner Scraps

Hey, y’all! Welcome back to the Corner Scraps blog!

This week I have some décor spools I made to go with this month’s “Threads” Stamperia papers and ephemera in the Cards, Tags, & More Kit from Tres Jolie Kit Club. I loved this month’s kit, and couldn’t help turn it into some décor pieces this week (and next week too!) along with the needlebook I made for my first project this month! I definitely focused on the “and More” part of the kit for March!

Check out the video to get some ideas and inspiration for what you can do with the items in this months kit!

Video:

I can honestly say that if everything was insta-dry this project would not have taken very long! I spent a lot of time waiting for my 3D Gel or the paint, mica, and water soaked flowers to dry since I didn’t want to use my heat gun too much – some things just work best air dried, like the rust effect powder.

Here is are a couple of close ups of the shortest spool – the one with the Tres Jolie Chipboard Tailor’s Dummy (Mannequin) on top. As you can see, I added tons of mediums to the spools before I considered them finished, but I didn’t actually use that much! I used the lightest and darkest [rose] mica powers and the Liquid Color Fluid Medium from the March Mixed Media Kit, some Burnt Sienna Liquid Acrylic paint from the February Mixed Media Kit, and some rust effect powder from the September 2019 Mixed Media Kit. Mixing the darkest mica with the Burnt Sienna paint also gave me some rust color! All of the waxes I used were also from previous Tres Jolie Kits! (Tres Jolie Kits are great for building up a stash!)

Here is the base of the shortest spool. I just wrapped my “measuring tape” around the bottom, built up a hill of gel, and after it dried I added some rust effect powder and paint to make it look like it had been sitting around for ages! Letting my rust and paint air dry also allowed for some color to soak into the papers—adding more the the aged look I was going for.

I think the top of the middle sized spool was the quickest to go together – minus the dry time for the 3D gel to dry that is holding the chipboard up—because it is mostly flowers! You can see along the edges of the chipboard some of the dark rose mica that I painted on in some of the areas.

There are a lot of layers wrapped around this base! I have chipboard thread spools, scissors, and advertisements. This is the spool I used [reversed] Scotch tape on to hold the chipboard pieces in a curved shape while I waited for the 3D gel to dry. Then I came in with my flowers, followed by my mediums, and started layering on some color and rust.

Last, but not least, the tallest spool top! This one might be my favorite because it was large enough to really let the “rust” show up!! I also really love how the Burnt Sienna mixed with the dark rose mica gave a rust-ish color to the top edge of the sewing machine—it shows up especially well on the backside where the measuring tape paper is.

Here is a good close up of how some paint and rust really added a distressed, vintage feel to those flowers. Once it’s in place, and if you don’t touch it too much while wet, paper is an amazing substrate to work with! It may be delicate when wet, but it makes up for it in absorbability and malleability.

Here is the base of my third and largest spool. I added my rust, paint, and mica to all of my exposed edges, and really added some rust to the top of my chipboard bobbin. As soon as I’m sure all of the glues and chipboard is bone dry, I will be giving these spools a protective coating of some matte sealer and be posting them up in my Etsy shop.

I even added some of the rust effect powder to the undersides of the tops! I carefully supported my spools between a few bottles and let them sit upside down until the rust effect powder and vinegar had dried.

Thank you for joining me here in my corner, I hope you enjoyed this project and it gave you some ideas of what you can do using the papers and embellishments found in this month’s Cards, Tags, & More Kit!

Stay Crafty, Friends

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Corner Scraps can be found in the following places:

Tres Jolie can be found at the following places:

In addition to this month’s Cards, Tags, & More Kit (*from previous Tres Jolie Kits), I used:

*DecoArt Black Gesso; Finnabair: *Matte Wax: “Old White” & “Charcoal Black,” 3D Matte Gel, Clear Gesso, “Large Gears” & “Machine Parts” Moulds; *13@rts “Rusty Bronze” Ayeeda Powder; Tim Holtz: Sanding Block, Opaque Matte Texture Paste, Alcohol Ink: “Caramel” & “Latte,” *Stamperia “Metallic Black” Wax; Fiskars 1” Circle Punch; *49 & Market Flowers, Prima Marketing Flowers, Art Glitter Glue; Mod Podge (Vintage); Liquitex Matte Gel; Fabri-Tac, spools made by me

Tres Jolie Kit Club–March 2022 Mood board-Scrapbooking & Mixed Media Kits

March 10, 2022March 10, 2022 | Corner Scraps

Hey, y’all! Welcome back to the Corner Scraps blog!

This week I have a mixed media canvas I made using both the March Mixed Media and Scrapbooking Kits from Tres Jolie Kit Club. The coordination between the micas and the papers was phenomenal! How could I resist using them together?!

I grabbed up a 9” x 12” canvas panel from my stash and started cutting and gluing and embossing! Check out my video to see it all come together.

Video:

Don’t be afraid to use your scissors! Chipboard, flowers, paper…nothing is immune from being cut, altered, and put back together! This project wasn’t too difficult, most of the time spent on it was spent drying or waiting for it to dry.

We have a new mood board challenge for the month. The rules are as follows:

You can create any type of project for the challenge.
You MUST say what you were inspired by.
You MUST include the twist in your design: OLD WORLD ELEGANCE.
We would love to see you USE AT LEAST ONE of Tres Jolie’s products on your projects but it isn’t required to play along.
It MUST be a new project.

Isn’t the mood board this month just beautiful?

Place your entries in the March 2022 challenge folder on Tres Jolie Kit Club Café Facebook page. This challenge ends on March 31st 2022 at 11:59 pm CST. All entries must be in this folder to be eligible for the prize (to have everyone eligible to win, we are limited the same winner to once every 3 months).

Now, some close-ups of the different parts of my canvas:

Here are some images of the mix of embossing powders I made-this month’s Ultrafine Gold, April 2021’s Patina Bronzed Copper, and my Ranger Triple Thick from my stash-put on in two layers, then “cooked” many, many times to (purposely) create some roughness and knock down some shine.

In addition to embossing my chipboard, I added embossing to most of the paper pieces, including the background paper, to give some extra texture and interest to the canvas.

I used the lightest rose mica powder, mixed with the Liquid Color Fluid Medium and watered down, on my background paper. I also used the darkest rose mica, the (I think) next to lightest rose, and both green micas as paints to really make the background flowers and leaves pop as seen in the video.

This main cluster is the biggest reason I am going to wait a week to give my canvas the coat of Triple Thick Clear Glaze. There are so many layers and “globs” of gel mediums and lots of water, and more gel medium! I don’t want moisture getting stuck behind the glaze! I have so many layers of paper and liquid matte medium I don’t know if the moisture would make it out through the back! Better safe than soggy and foggy!!

I didn’t set out to use these beads, I was just digging through my stash when I cam across the piece of costume jewelry and the bags of pearl beads. I don’t even know where everything came from, but I thought it was fortunate that I had those dusty rose colored beads to match the papers and micas! (I forgot to mention it in the video, but I used E6000 on the necklace.)

The Burnt Sienna Liquid Acrylic from last month’s Mixed Media Kit is the perfect color to add some shadowy and vintage effects. Don’t forget, if you decide to use a heat gun to “play” with your pink Prima flowers, they start curling up quickly!

Thank you for joining me here in my corner. I hope you enjoyed this mixed media canvas project gave you some ideas of what you can do with this month’s Mixed Media and Scrapbooking Kits and inspiration for this month’s mood board!

Stay Crafty, Friends

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Corner Scraps can be found at the following places:

In addition to this month’s Scrapbooking Kit & Mixed Media Kit (*from previous Tres Jolie Kits), I used:

*Gary M. Burlin Co. Embossing Powder “Patina Bronzed Copper”; Ranger Extra Thick Embossing Powder, Big Emboss It Ink Pad, Emboss It Dauber, Emboss It Refill, Heat-It Tool; Finnabair 3D Matte Gel, *Liquid Acrylic “Burnt Sienna” Paint; Liquitex Matte Acrylic Medium, Matte Gel; 9×12 Canvas Panel; Fabri-Tac; Judi-Kins Diamond Glaze; pearl beads; E6000

Tres Jolie Kit Club–Needlebook-March 2022 Cards, Tags, & More Kit

March 3, 2022March 3, 2022 | Corner Scraps

Hey, y’all! Welcome back to the Corner Scraps Blog!

This month’s Cards, Tags, & More Kit from Tres Jolie Kit Club has the fabulous Stamperia “Threads” collection, and I couldn’t help but want to build on that sewing theme by making a needlebook (even if I do have to sew really slow to get it “right”)!

I know I normally try to stay with using the kit only or mostly for my first project of the month, but sometimes inspiration just strikes and you have to go with it! And don’t think you have to go out and buy fabric—think of what you have around your house. Do you have some old pillowcases you could re-purpose? An old shirt you no longer wear? Use what you have! This doesn’t use a lot of fabric, about 1/4 yard for the base construction–a standard pillowcase (20″x26″) would actually provide twice as much fabric as you need (overall, the fabric is approx. 12″x30″ + any small bits you may want to add).

Don’t forget to check out my video to watch me putting this together!

Video:

Page by page break-down:

Because I refer to the pages as 1 (&6), 2 (&5), and 3 (&4) in the more detailed PDF, I have decided to add “sides” for this post. For example, I have Page 1 and Page 1 side 2. Also, at the time the photos were taken, I wasn’t completely done decorating, but I think I was far along enough to show possibilities and examples?!

*Alternative: Instead of a 3-piece cover, you could just cut two pieces of fabric the size listed for the “Inside Cover.”

My closure! Even though I had originally planned on using snaps, I found that the “teeth” parts weren’t long enough to make it through the felt and I didn’t want to only have it attached to a single layer of fabric. Fortunately, I *knew* I had some kind of hook and eye closures in my stash so I dug them out and threw some stitches in to hold them in place.

After all of your pages are completed, line them up and stitch down the center of your book, using some straight pins inserted at the centers to guide you.

The “dots” are the pinheads, which aren’t lined up here, but I did make sure they were lined up — at the center represented by the dashed lines — before I ran the whole thing through my sewing machine. **Sorry this photo is blurry, I had to grab it from the video because I forgot to take an actual photo during construction!

Thank you for joining me here in my corner. I hope you enjoyed this needlebook project and it gave you some ideas of what you can do with this month’s Cards, Tags, & More Kit! Paper products don’t always have to be stationary, they can be made functional too!

Stay Crafty, Friends

Corner Scraps Can Also Be Found At:

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Tres Jolie can be found at the following places: