C.J.&#039;s Corner Scraps

Tres Jolie can also be found at:

In addition to the items from this month’s Cards, Tags, & More Kit (*from previous Tres Jolie Kits), I used:

Some items (non-Tres Jolie) contain an affiliate link where I earn a small commission at no extra cost to you!

*49 & Market “Cream” Burlap Ribbon; Canvas Corp Canvas Fringe; Hazel & Ruby Fat Roll “Quote Me;” Scotch Silver Polka Dot Washi Tape; Aleene’s Tacky Glue; JudiKins Diamond Glaze; paperclips; brads; metal tabs; handmade paper; thread

Tres Jolie Kit Club–Gilded Magnolia – June 2022 Mixed Media Kit

June 19, 2022June 18, 2022 | Corner Scraps

Hey, y’all! I couldn’t help but use this month’s Mixed Media Kit from Tres Jolie Kit Club after I saw the bright, beautiful colors of TCW’s Stencil Butter’s and modeling paste. I actually didn’t even own the moulds I used for the flowers until after I saw the kit, then one day the Magnolia mould showed up in the “you might like” section of my Amazon homepage, and I knew then and there exactly what I was going to do with the kit!

As I noted in the video, I still have to give my project a coating of some Triple-Thick Clear Glaze, but we have had “tropical” conditions here for over a week now, and I still haven’t been able to spray them! I kept waiting, hoping to be able to take photos after the spray had set, but at this rate, it might be October before I get to do that!

Video:

There are not a lot of steps involved in the making of this project, and those fabulous Stencil Butter’s do a lot of the “heavy lifting.”

I used all three of the Mixed Media Boards for the background – pushing them together and stenciling across the seams to create a continuous pattern. I built up the layers using the Stencil Butters, some white texture paste, some 3D Matte Gel, and the modeling paste from the kit this month.

I grabbed up my paperclay and moulds, and set about creating the flowers I wanted to use to span across the Mixed Media boards. I used two of the “Magnolia” pieces (product list at bottom of post) and one set of the “Winter Blooms,” then set to work to create my flower spray. I wrapped some plastic wrap around my boards so I could work on the placement of my flowers without worrying about making a mess, and while still on the plastic wrap, I used my 3D Matte Gel to hold the pieces together.

After the gel had set up, I pulled the plastic wrap off the back and coated the flowers with some white gesso. My first layer of color was a coating of the Gamboge Stencil Butter, followed by a coating of the Grecian Gold Modeling Paste.

When it came time to attach my flowers to the boards, I mixed the Grecian Gold Modeling Paste with some of my 3D Matte Gel and used that – that way it would all blend together!

At this point, the only thing holding my boards together was the flower spray, so I got a 9”x12” MDF board from my stash and cut it down to size. Then I used some wood glue, spread it out evenly, and set the boards in place. I used some book clips, with some cushioning under the front edges, to hold everything together while that glue set up.

Eventually, I will be adding some Krylon Triple-Thick Crystal Clear Glaze to the finished piece, once we get a break in the humidity, and then this will be completely finished!

Thank-you for joining me here in my corner, I hope you enjoyed this project and it gave you some ideas of what you can do with the Stencil Butter’s and Modeling Paste found in this month’s Mixed Media Kit.

Stay Crafty, Friends

Corner Scraps can also be found at:

Tres Jolie can also be found at:

In addition to the items from the June 2022 Mixed Media Kit, I used:

Items may contain an affiliate link (non-Tres Jolie), where I earn a small commission at no extra cost to you!

Creative Paperclay , Finnabair 3D Matte Gel , Ranger “Opaque Matte” Texture Paste , Prima ReDesign “Winter Blooms” Mould , Chongmu “Magnolia Camellia” Mold , Daler-Rowney White Gesso , Gorilla Wood Glue , 9”x12”x0.25” MDF Board , (eventually) Krylon Triple-Thick Crystal Clear Glaze

Tres Jolie Kit Club–Memory Dex Cards!–June 2022 Cards, Tags, & More Kit

June 16, 2022June 10, 2022 | Corner Scraps

Hey, y’all!

We’re halfway through June, and this week I have some Memory Dex cards for you that I created using items from this month’s Cards, Tags, & More Kit from Tres Jolie Kit Club and items from my stash – quite a few from previous Tres Jolie Kits! Check out my video to see what I did for each of the cards I made – then grab up your supplies and create your own Memory Dex card(s).

I had bought the Heidi Swapp Memory Dex Spinner quite some time ago, and had originally thought of grabbing up some spray paint and changing the color – I might still do that – but I grabbed it up for this project so I’d have someplace to put my cards when they were done, and to make sure I didn’t make them too tall to clear the bottom! Depending on what kind of “–dex” system you have – be it a spinner, a box, something vintage, or something custom made – you can get very creative on how your Memory Dex cards are made! If, for example, you have the Memory Dex Box, you don’t have to worry about height, only width! (After this project was completed I happened to find a vintage Rolodex® system that would allow cards to fit in without any height or width restrictions!! *happy dance*)

Video:

A closer look at the cards I made:

My Concord & 9th “Lucky” Die cuts the three layers – thick line and outline from one die, thin line from another – so I made two lucky cards. The thick line and outline were cut from a half sheet of the white cardstock that I hand-inked up using a variety of Distress Oxides from my stash. The white pieces were from another partial sheet of the KaiserCraft cardstock, and on some of those, like the butterfly, I added some Distress Oxide to give a pop of color. I didn’t have any particular plans when I set out to make my cards, I just cut a lot of pieces and started layering; generally ending with a few of the Eyelet Outlet jewels and/or some of the small Prima butterflies.

I made my “Imagine” card a shaker card by cutting a circle out of the pink striped paper from this month’s kit, adding a sheet of craft foam with a circle cut out as a spacer, and filling it with some of the beads and sequins from the Buttons Galore cube from Septembers (2021) Cards Kit. I just used some plastic from an old package of die cuts – I often save the harder/stiffer plastic packaging for just this reason! – and stitched it in place with some metallic silver thread. My “Imagine” as a layer of the “Gamboge” Stencil Butter on it from the Mixed Media Kit and, while it was still wet, I sprinkled some Lindy’s Magical Powder on and spritzed it with a little water.

These two cards were really a couple of “let’s see how these parts work together” cards! The “grateful” card has a slot cut from the top (the label die from Tim Holtz’s “Stitched Slots”) that I just tucked a couple of large die cuts into after giving them a little color. The flower is just inked with some Distress Oxide, and the leaves have some Lindy’s Magical’s sprinkled on them. I cut the card from my inked KaiserCraft sheet, backed it with some of my leftover handmade paper, and added some stamping, jewels, & butterflies. The “grateful” had originally been stamped, but it didn’t show up very well, so I traced over it with a gel pen.

I wasn’t sure when I cut it if I would use the Bird Branch die, but I added some Magical’s, let it dry, and thought about what I’d do with it while working on other cards. Eventually, it came time to play with it, and I found that I liked how it looked with the oval frame, but the frame needed some color too! So on went some Magical and PearlEx powders. The card is another cut from my inked sheet and has some of the “Grecian Gold” Modeling paste (from the Mixed Media Kit this month!) dabbed on with my finger for a little shine. Then, to add a bit from this month’s Card’s Kit, I popped on a tab punched from one of the papers, added some orange jewels, and a Tim Holtz “Small Talk” sticker from my stash.

These two Memory Dex cards were made from a piece of scrap cardstock that I practiced a couple of mixed media ideas on. I have some texture paste, mica powder, and Magical powder on the base tag/Memory Dex, then I stamped the butterfly from the stamp in this month’s kit, I cut a tag-shaped frame out from my inked paper, layered a couple of more tags vertically, popped in a flower, added my jewels and phrase.

While I was doing all of my cutting, I decided to make a round Memory Dex card, so I used one of my circle dies to cut out the inked stenciling I had done (stencil from this month’s Mixed Media kit!). I stamped on the butterfly and phrase, attached a rectangle bottom, and ran it through my sewing machine a few times. The final touches were some Distress Oxide around the edges and the jewels.

When I first started this card I had thought of just attaching the pocket to another card, but as I was putting it together, I decided that I much preferred the pocket as the card! The top slot is backed by some pink cardstock from my stash, and the rest of the slots are back with white cardstock – what had been the original Memory Dex shaped card. The Tim Holtz “Stitched Slots” die is the perfect size for the spinner, I just punched the slots at the bottom and popped it right on. I used some of the smaller tags, cut with the tag dies from this month’s kit and cut from this month’s papers, to stick on some “Small Talk” phrases and slipped them into the slots. They don’t weigh a lot, so the friction between the papers is enough to hold them in place when they are upside down on the spinner. I then just added some of my die-cut hearts, outlined them with a yellow gel pen, added the label, and another “Small Talk” sticker.

The card with the bicycle stamped on it was probably the fastest to put together because all I did is layer up the different circles I had already cut out! I used the pink striped circle to fill the circle in the card base, then put the layers through my Sizzix using the dot embossing folder that had come with the machine, added that half-circle with some Lindy’s Magical’s stenciled on, and then all of the other plain circles. To add some contrast to all those circles, I popped on one of the smallest tags, then stamped on the bicycle and added the butterfly and phrase.

My “Spring” card was my first of the batch! I trimmed an inch off the width of a 3”x5” index card so it would fit on the spinner, used the stamp from this month to just get the flowers to peek out from behind the tag, and splattered it with some “Lemon” Glossy Spray. The tag is from some pink cardstock I had that was already adhered to an adhesive sheet. I used the thin scraps from my Folio at the beginning of the month, and just randomly layered them on the adhesive. I then cut the tag using the next to largest die in the set, peeled the protective paper the rest of the way off, and brushed on some Finnabair Mica Powder. Then I just finished up the details with some flowers, jewels, a butterfly, and the small tag.

Lastly, my “document” card. The die-cut word was too long to fit on the Memory Dex Spinner, so I cut it where it could be hyphenated, clipped off an end of the cross-mark on the “t” to use as the hyphen, and layered up a couple tags and a tab on the base card. I used some of the “Grecian Gold” Modeling paste on “document,” the stars and diamonds are from my Concord & 9th Lucky Die Set, there’s a little stamping, and a few jewels, and this card was done!

Thank you for joining me here in my corner! I hope you enjoyed seeing these cards and they inspired you to make your own Memory Dex card or two!

Stay Crafty, Friends

Corner Scraps can also be found at:

Tres Jolie can also be found at:

In addition to this month’s Cards, Tags, & More Kit (*from previous Tres Jolie Kits), I used:

Some items (non-Tres Jolie) contain an affiliate link where I earn a commission at no extra cost to you!

Lindy’s Gang: Magical Shaker: *Guten Tag Teal, *Oktoberfest Orange, & Yodeling Yellow, & *Magical “Bougainvillea Fuchsia;” *Jacquard PearlEx “Misty Lavender;” Ranger/Dina Wakley: *Glossy Spray “Lemon;” Prima/Finnabair: *“Vintage Roses” & *“Pearls & Crystals” Mica Sets; Darice: *“Mosaic Butterfly” Embossing Folder; *Embossing Essentials “Oblong Frames,” & *Embossing Essentials “Oblong Doily Frames;” Dress My Craft: *“Classic Doily” & *“Crochet Doily” Dies; Buttons Galore: *“28 Lilac Lane;” Ranger Opaque Matte Texture Paste; StazOn “Olive Green” StazOn “Royal Purple” Ranger/Tim Holtz: Distress Oxide Spray “Dried Marigold” Distress Oxide “Speckled Egg” Distress Oxide “Squeezed Lemonade” Distress Oxide “Kitsch Flamingo” Distress Oxide “Villainous Potion” Distress Ink “Villainous Potion” Distress Ink “Speckled Egg” Ranger/Wendy Vecchi: Archival Ink “Watering Can” idea-ology/Tim Holtz “Small Talk” Concord & 9th “Lucky” Die Set, Heidi Swapp: “Imagine” Die, “Document” Die, Memory Dex Dies (Oval) Memory Dex Punch & Memory Dex Spinner (Black) Spellbinders Tool ‘n One & Standard Circle Nestabilities; We R Memory Keepers 3-Way Corner Punch & Tab Punch; Sizzix: Big Shot Plus (Big Shot Plus Starter Kit) Sizzix/Tim Holtz: “Tattered Florals” & “Bird Branch” Bigz Dies, & “Stitched Slots” Thinlits; Sakura Gelly Roll Moonlight & Gelly Roll Souffle Pens; Scrapbook Adhesives 12×12 Adhesive Sheet; Aleene’s Tacky Glue; Krylon Workable Fixatif; JudiKins Diamond Glaze & MicroGlaze; Art Glitter Glue; adhesive foam squares; Tonic/Tim Holtz Stamp Platform; We R Memory Keepers 3-way Corner Punch; Unbranded Memory Dex/Rolodex Dies; blending brushes; 1/4” & 1/8” double sided tape, craft foam; *spray bottle; 3×5 index cards

Tres Jolie Kit Club–June 2022 Mood Board-“Let Your Creativity Bloom” Junk Journal

June 9, 2022June 8, 2022 | Corner Scraps

Hey, y’all!

This week I turned the June Scrapbooking Kit from Tres Jolie Kit Club into a junk journal. The P13 papers and ephemera from their “Let Your Creativity Bloom” line had such beautiful colors – muted shades of pink and sage – and there was a photo of a book in this month’s mood board! What else would I think up for the challenge?!?!

I didn’t just put any old fabrics and papers together, I decided that to be extra messy, I needed to dye my fabrics exactly how I wanted and make my own (matching) paper – check out my video to see the process, or, if you want, you can just check out the flip-through.

On my cover, I layered up strips of fabric, so of the ones I dyed, some are scraps from my stash. I topped a part of one of the patterned papers with one of the Tres Jolie Chipboard pieces coated with some embossing powders, added a few of the flowers, and added some Distress Foundry Wax in “Sterling” as some accent color. Check out the video to see the process of my junk journal from start to finish!

Video:

Flip-through:

Have you checked out the June Mood Board yet? Beautiful pink flowers, galvanized steel bucket, Ball Mason jars, and a book – take a peek and see what creativity it inspires in you!

Make sure you join us for our June mood board challenge!

You can create any type of project for the challenge.
You MUST say what you were inspired by.
You MUST include the twist in your design.
We would love to see you USE AT LEAST 1 of Tres Jolie’s products on your projects but it isn’t required to play along.
It MUST be a new project.
The twist for this month is SPRING FLING.

Place your entries in the June 2022 challenge folder on the Tres Jolie Kit Club Café Facebook page. This challenge ends on June 30th, 2022 at 11:59 pm CST. All entries must be in this folder to be eligible for the prize (to have everyone eligible to win, we are limited the same winner to once every 3 months).

This junk journal is thick! There are over 50 pages filled with lots of writing space, tuck-ins, and pockets – and a securely attached tie closure to keep it together.

On both the front and back covers I added a section of lace trim, lightly colored with Distress Oxides, as tuck in spots.

I turned envelopes into pockets, covered them with strips of fabric, and added closures to a couple of them – a zipper on one and a simple tie on another.

I have tuck-in spots throughout the journal made up of layers of papers and ephemera. I have even added in some old book pages from a 1935 History of English Literature book – I thought this book fit well with the overall “Creativity” theme.

I wanted to add a lot of texture and visual interest in this journal, so I have short pages, ledger papers, bits of fabric and lace, and tons of stitching in here. There is something to see and feel everywhere!

I turned this bit of patterned paper into a simple flip-up card using some lace as the hinge and adding a tab to the edge.

a sheet of patterned paper torn makes a wonderfully distressed pocket! And I just couldn’t bring myself to (fully) separate this stretch of flowers, I used the last bits of that particular lace to make hinges between four inch sections so it could be pulled out – and the image could stay together.

Old music sheets add a lovely aged touch while also making fabulous pockets. I even used the envelopes from the ephemera and tickets to create little tuck-in areas.

When I saw all that leftover dyed water from my fabrics, I couldn’t just let it go to waste, so I added scraps of paper and created my own custom-colored, dapple-edged sheets – either glued to decorated envelopes and pages, or straight into tuck spots to be written on (I suggest using markers, paint pens, or gel pens though, due to the uneven nature of handmade paper!)

I didn’t want to just simply cover my basic white envelopes, so I added fabric, lace, paper, and/or ephemera to create variety and interest. I used one of the Prima flower packs from the kit, and in addition to my cover decoration, I stitched flowers directly onto some of the tuck-ins.

As promised in the video, here is the “stitching guide” (I don’t know what else to call it!) for how I put my signatures in.

How I stitched in my signatures:

Out = from the inside –> out
In = from the outside –> in
First-Middle-Third = Signature from left to right
Top, Second, Middle, Fourth, Last = Hole, from top to bottom.

First Signature:

Middle Signature:

Third Signature:

Out – First – Middle

In – Third – Second

Out – Third – Top

In – First – Second

Out – First – Fourth

In – Third – Last

Out – Third – Fourth

In – First – Middle

Out – Middle – Middle

In – First – Second

Out – First – Top

In – Middle – Second

Out – Middle – Fourth

In – First – Last

Out – First – Fourth

In – Middle – Middle

Out – Third – Middle

In – Middle – Second

Out – Middle – Top

In – Third – Second

Out – Third – Fourth

In – Middle – Last

Out – Middle – Fourth

In – Third – Middle

Thank you for joining me here in my corner, I hope you enjoyed this junk journal and it gave you some inspiration and ideas of what you can do with this month’s Scrapbooking Kit!

Stay Crafty, Friends

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Corner Scraps can also be found at:

Tres Jolie can also be found at:

In addition to this month’s Scrapbooking Kit (*from previous Tres Jolie Kits), I used:

Some products (non-Tres Jolie) contain an affiliate link, where I earn a commission at no extra cost to you!

Tres Jolie Kit Club–Tag Folio!-June 2022 Cards, Tags, & More Kit

June 2, 2022June 1, 2022 | Corner Scraps

Hey, y’all!

Welcome to June! Did you get a chance to check out the kit reveals yesterday? This month’s kits are just fab!

For my first June project, I made a little tag-filled folio using this month’s Cards, Tags, & More Kit from Tres Jolie Kit Club, a few extras from my stash (ink, thread, & eyelets), and a cut file I created (I have the measurements I used listed below!).

So, grab your supplies and make yourself a little tag-folio!

I have a two-part tutorial (well, I talked a lot at any rate!) for this folio, part 1 is the tag cutting and base construction, and part 2 is the decorating and final touches. I go over cutting your folio base by hand if you aren’t using an electronic cutting machine, and my assembly process when putting everything together.

Part 1: Tag Cutting & Base Construction

Part 2: Decorating & Final Touches

First, a quick look at all the tags I made for my folio. I die cut a full sheet of the white cardstock, and six sheets of the patterned paper into a variety of tags – some to use this week, some to have ready for the rest of my projects this month. I used the white tags as my base, tore the patterned paper tags at about a 1/3rd – 2/3rd split, and mixed and matched the sides. I have had those butterfly eyelets for years now, and I thought it was about time to use some up, so I popped them into the holes on the tags.

I used a full sheet of the white cardstock to make my base. I have vertical score lines at 3-3/4”, 4”, 4-1/4”, 7-3/4”, 8”, and 8-1/4” and a horizontal score line 6” from the top. I didn’t cut the bottom 1/2” with the barcode and “KaiserCraft” off my sheet, so I have a score line at 12” also. I actually used that little bit during the construction to “protect” the bottom edges of my pockets during construction! Check out the image below to see all the measurements, plus I have some slot placement templates.

Slot Measurements:

Slot positioning templates are available as a PDF from my personal (non-Tres Jolie!!) DropBox for personal use only, please (attribution appreciated, but not required). When printed, the panels should be 4”x6” for an easy lineup with your edges and score lines – although printers & printer settings may vary! (Note: when testing, I made sure to print “actual size” from the printer dialog box and not “to fit” because Adobe and/or my printer wanted to make the 8-1/2”x11” image smaller to fit with margins on an 8-1/2”x11” sheet of paper!)

I made a pocket for each slot of my folio, but I have also added the measurements for alternate pockets so you have a variety to choose from:

*Measurements are to the center of the slot*

Part 1 of my videos covers the construction of the folio base, so I’ll just add some refresher details here on the blog. I lined my pockets up carefully, and got them in place – they are sized to be able to just be folded in half to fit – more or less – there may be a couple that requires some tweaking by folding slightly more than half. I used a combination of double-sided tape and glue to hold everything together – because I like adhesion! You could easily put it all together with just one or the other!!

Before I folded the folio over to close it up, I added a length of the seam binding from the kit across the middle, cut a slot in the hinge between the middle and last panel so I could feed the seam binding through and I would be able to tie it together when that last panel was folded in. For the end of the seam binding that came out of the edge of the folio, I added a couple of tiny staples to help keep it in place through all the tying.

I wanted to reinforce the hinges some, but I didn’t want to add a lot of bulk, so I used the cover sheet from the paper pack to reinforce the hinges on the [folded over] inside of the folio and to reinforce and add some more color to the hinges between the panels on the [visible] inside of the folio. After I had the folio folded in half and glued together, I added the last bit of seam binding to the outside of my hinges to help reinforce all the bending of the paper and cardstock.

With my base finally put together, it was time to start getting the finishing touches done, so I added the papers I had chosen for the outside of the folio. Since I was going to be adding stitching around my edge, I didn’t worry about making sure my adhesive went all the way to the edge, if you aren’t going to add stitching, you will want to make sure you have a secure seal so your cover paper doesn’t pull up!

Even though I wasn’t going to be doing my stitching yet, I wanted to get my holes made so I would know where my stitching would be, so I made a template that would help me make sure everything was spaced evenly and lined up where I wanted them. You can grab that template as a PDF from my personal DropBox if you would like to use it for your personal folio. I have it made to print on two sheets, with a little overlap in the middle to help line the holes up. Printers being what they are, you may or may not get lucky enough to have it print “perfect!” I didn’t get that lucky, but my second page was only a hair “off” so it wasn’t a big problem. (Note: Just like with the slot templates, make sure you print “actual size” and not “to fit”!)

After my holes were all poked through, I cut some 3/16” stripes of white cardstock and a 1/8” strip to use as a spacer so I could even out how my hinge papers looked. I used the 1/8” strip to add the space between the edges of the holes and the edge of the 3/16” strip. I also added 3/16” strips to the outer [vertical] edges so my slot reinforcements would sit evenly (I also have a layer of cardstock under slot reinforcements – so my tag slots are super reinforced now!). I inked up my slot covers and glued them in place.

Now it was finally time to start thinking about how I wanted to decorate the folio, and which finishing touches I wanted to add. I used my “Royal Purple” StazOn to stamp my butterfly images and to dye my seam binding tie closure. For my main image/cluster, I go over getting permanent ink to bleed out and create the shadow effect in the second video. A helpful “fix” for images that don’t stamp clearly! (Personally, if I were to do this project again, I would add my stamping to the cover paper before adding it to the folio. It was all the pocket layers that caused the stamping issues because it was no longer flat!) Anyhow, even if something goes “wrong,” there is always a “fix.” In this case, I used some 91% isopropyl (rubbing) alcohol to cause my StazOn to bleed. I added my inks to the cardstock, then stamped the image on and fussy cut it out. The flowers and leaves are glued flat to the surface, offset just a touch to give a shadow effect, and the butterfly is popped up on some foam. The rest of the images I just stamped and left however they came out. (I did use a strip of cardstock to protect my seam binding covered hinges when I wanted to stamp across them.) I popped on some of the orange pearls and thought about what I wanted to add to the panel that folds in.

On that third panel that folds in, I didn’t want to just leave it blank, so I added a couple of the tags I had cut out. I glued the middle-sized tag on white cardstock near the bottom horizontally and added a tag in the next size up (second largest) as a flap with a simple tab added on. The “bloom” was stamped using the P13 stamp set that had been in February’s Cards, Tags, & More Kit.

Finally, I decided it was time to add my stitching! I just have a simple blanket stitch around the outside of the folio and some straight stitching along the hinges. I added some extra stitching to wrap up the corners of the folio, and added the last little bits to the decoration – the Prima flowers under the butterfly wings, and the green pearls along the bottom of the tag flap. With all that done, I added my tags to their slots and closed it all up!

Thank you for joining me here in my corner, I hope you enjoyed this folio project and have a chance to check out the videos that accompany it! Don’t forget to check out my Etsy shop to get the discounted cut file!

Stay Crafty, Friends

Corner Scraps can also be found at:

Tres Jolie can also be found at:

In addition to this month’s Cards, Tags, & More Kit (*from previous Tres Jolie Kits), I used (some non-Tres Jolie Kit Club items contain an affiliate link where I earn a small commission with no extra cost to you!):

*Tim Holtz Distress Ink “Dried Marigold;” *P13 “The Four Seasons: Spring” Stamp Set; *Memento Dew Drop “Angel Pink;” CornerScrapsStudio “Folio” Digital Cut File; StazOn “Royal Purple;” We R Memory Keepers: Foam Mat, Craft Knife, Crop-A-Dile, Crop-A-Dile II, Tab Punch; *spray bottle (with water); bone folder; butterfly eyelets (1/8”); Silhouette Cameo 3; Nicapa 12×12 Cutting Mat; Sizzix Big Shot Plus; EK Tools Score Board; awl; needle; blending brushes; 91% isopropyl alcohol; rainbow variegated embroidery floss (J&P Coats); Art Glitter Glue; 1/8”, 1/4”, & 1” double sided tape; Aleene’s Tacky Glue; JudiKins Diamond Glaze; Fray-No-More; doubled-sided adhesive foam strips

Reveal Day!–June 2022 Kits from Tres Jolie Kit Club

June 1, 2022May 31, 2022 | Corner Scraps

It’s a new month, and that means it’s time for new kits from Tres Jolie Kit Club! Get yours before they’re gone! We are starting to implement our new year changes, so make sure you are following us on all Social Media platforms and are a part of the Facebook Café that way you won’t miss a single announcement or project created with these kits.

The June 2022 Scrapbooking Kit is filled with gorgeous new papers from P13. As always, these papers will be amazing for all your upcoming projects – they have a beautiful spring/summer feel to them, and a “craft” theme. You will find a lovely assortment of patterned papers and perfectly coordinated embellishments in this month’s Scrapbooking Kit.

The Mixed Media Kit has what you need to get messy and have fun! Did you get to see the newest releases from The Crafter’s Workshop? This kit has some of them! Grab up your palette knife (or an old store card) and start spreading your beautiful, summery Stencil Butters through the stencil onto one – or all – of the Mixed Media Boards in this month’s kit!

Our card kit is filled with papers from Asuka (a new-to-us brand) that have a beautiful watercolor pattern, Dress My Craft dies, and more goodness so you can create lovely cards and more. Who doesn’t like creating a variety of projects from one kit?

These kits are for the beginner to the advanced, clean and simple, to mixed media maven. No matter your style, there is something for everyone. We know you are going to love it!

Presenting the Tres Jolie June 2022 kits:

*Scrapbook Kit*

*Mixed Media Kit*

*Cards, Tags, and More Kit*

Don’t forget to stop by the Tres Jolie YouTube channel and see the video reveal of all our kits.

Love them, right! You can still get one of your own (some kits are in very limited quantities). Become a subscriber and you will never miss out on our gorgeous, coordinated kits. Just visit Tres Jolie subscribe.

The designers at Tres Jolie have created some amazing layouts/projects with this kit.

Here is a little tease from me using the Cards, Tags, & More Kit & Scrapbooking Kit:

Please stop by the other designer’s blogs, listed below, and check out their sneak peeks.

Jeanne Rodriguez

Kim Heard

We have a new mood board challenge for the month, the rules are as follows:

You can create any type of project for the challenge.
You MUST say what you were inspired by.
You MUST include the twist in your design.
We would love to see you USE AT LEAST 1 of Tres Jolie’s products on your projects but it isn’t required to play along.
It MUST be a new project.
The twist for this month is SPRING FLING.

Here is the June 2022 mood board:

Tres Jolie can be found at the following places: