Tres Jolie Kit Club–Tags & a Pocket–May 2023 Cards, Tags, & More Kit

Hey, y’all! May is drawing to a close, but that just means it’s almost time for the June Tres Jolie Kit Club reveal! YAY! New supplies!

For my fourth and final May 2023 project, I used the Cards, Tags, & More Kit to make a rather quick and easy pocket to hold my tags. Make sure to check out the process video, then go grab up your kit and make yourself one or more of these pockets to have on hand for whatever you decide to do with them!

card-tag-pocket (10)



Pretty easy, right? A few simple folds and I have a triple-tag pocket!

All of my pockets were folded in half on the long side, and the only pocket that had the extra flaps was the largest “main” pocket.

After I had my pockets cut to size, I started layering them up. I started with the smallest pocket and glued it to the back (the half without the flaps!) of the largest, glued the middle pocket in, then folded the large pocket up and adhered the falls around the back.

To help make sure I had space, I added a second score line – 1/8” spacing – and then used extra tags as placeholders in the pockets so I could wrap my flaps around – instead of just creating a flat fold. My pockets are snug, and if I were to make another pocket that would hold more than three tags, I would have to add a little extra to the flaps of the outer pocket!

pkt-measurements


To help reinforce the tops of the inner pockets, I added a 1” wide strip of solid cardstock – folded in half and cut a hair shy of the width of the pocket – and slid it in place. This helps reinforce the edges and creates a smoother finish. I also added strips of patterned paper to the two outer edges of the pocket to reinforce those since tags would be sliding in and out.

Once the pocket base was complete, the decoration was quick and easy! I used three – maybe closer to 2-1/2 – sheets of the BoBunny paper to cover one side of my tags and both sides of my pocket.

card-tag-pocket (6) card-tag-pocket (1)

When I cut the blue plaid paper, I added approximately 1” extra so I could have a little extra to fold over the top of the pocket and a little extra to fold around the bottom and onto the back. For the ledger print patterned paper, I made sure to have an extra 1/2” at the top to fold over the top of the pocket and tore the bottom edge at the length needed to cover the edge of the blue plaid print paper. Super easy! Especially since I didn’t have to worry about wrapping the sides because I had already done that!

On the pocket front I added a few of the “Transfer Me” decals from this month’s Mixed Media Kit, then using my hot glue gun I popped on the flower buds I had left from my layout last week, two of the wicker hearts, and three of the BoBunny butterfly stickers. Since I have the wings lifted a little on the butterflies, I just gave them a light coating of glue so the sticky backing would no longer be sticky!

And although I hadn’t planned on adding so many KaiserCraft pearls, when I saw how the half circles looked, I knew I needed them all! I added some Diamond Glaze where I was going to attach the pearls – partly for extra hold, partly to give me the ability to slide the pearls around and make sure they were where I wanted them instead of just sticking them on and hoping I didn’t have to try and peel them back up!

card-tag-pocket (5) card-tag-pocket (3)

I laid the blue sections of the patterned paper I had left together, added the “Transfer Me” decals, then started the process of gluing the patterned paper to one side of the tags. It really was just as simple as that! For the backs of the tags, since I didn’t want to leave them the manila color, I added some of the chalk onto my work surface, watered it down, then just dabbed and dragged the backs of the tags through the puddle.

After the tags had dried fully, I picked some of the flower stickers from the BoBunny sticker sheet to add to the front, then decided my tags need some of the banner pieces – so I added three banner stickers!

The final addition to the tags was the pieces of Prima Trim over the tag holes. All I did is cut six of the trim pieces off and glued one to the front and one to the back using hot glue.

Now I have a triple-tag pocket that could be used as it is – maybe add a photo or two to the tags. The backs could have notes added. The tags could be used as a card and words of encouragement could be added to the tags, or the whole pocket could be used in a junk journal or book! Endless possibilities!


card-tag-pocket (7)

Thank you for joining me here on the blog today, I hope you enjoyed this quick and easy tag-pocket project and it gave you some ideas of what you can make using this month’s Cards, Tags, & More Kit!

Stay Crafty, Friends


Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!


Tres Jolie can also be found at:

Tres Jolie Facebook

Tres Jolie TikTok

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


Tres Jolie Insta Square Frame

In addition to this month’s Cards, Tags, & More Kit (+the “Transfer Me” decals from the Mixed Media Kit & the few flower buds from the Scrapbooking Kit!), I used:

Gorilla Hot Glue Gun & Hot Glue Sticks, UHU Stic, JudiKins Diamond Glaze, Ranger Craft Tags

Tres Jolie Kit Club–Let’s Explore!–May 2023 Scrapbooking Kit

Hey, y’all! This week I have a mood board inspired layout for you using the 49 & Market “Everywhere” collection from the Scrapbooking Kit and the mediums and stencil pack from the Mixed Media Kit. I started my paper crafting journey close to 15 years ago – with paper, glue, and scissors – it didn’t take long for me to realize I “needed” a few more supplies! I started with solid papers – I was terrified of patterned paper! How do you not have elements clashing?!?! And, even though I used duplicate photo prints, I still couldn’t fathom cutting them! Suffice it to say, my initial layouts are, comparatively, bland.

What was my biggest game-changer? Learning about the existence of gesso – especially clear gesso. I have zero formal training in physical art, so for everything I do now, I had to learn from videos, experience, and luck! Lots and lots of “dumb luck” LOL! Y’all, I couldn’t for the life of me figure out how others were adding wet mediums to their layouts and getting them to move around instead of soaking in and becoming splotches. Then I learned about gesso. Clear gesso when you don’t want to cover everything, and white gesso to create a “clean” area for your feature photos. And, even though I haven’t needed to (yet!), black gesso could easily be used too!

That brings us to my layout! A remarkable evolution from my first layout which had two solid colored cardstocks and two 4”x6” photos. Make sure you check out my process video to see what I did to put it all together!

sbkit-moodboard-4



This project was also inspired by this month’s mood board – maps, travel, and adventure – even if the adventure is a walk and picking flowers. Plus the twist “Oh The Places You Will Go” has both a literal and figurative interpretation. There isn’t just the physical adventure or possibilities of adventure, but the great adventure of life!

Tres Jolie Mood Board

moodboard


After I finally managed to decide which sheet of patterned paper I wanted to use, I added a coat of clear gesso. While that gesso dried, I remembered I needed to coat the Tres Jolie Chipboard pieces – but I had already rinsed out my brush and was preparing to wind down for the day, so I gave them a spray of Workable Fixatif for convenience!

After the gesso had dried, I used the Seth Apter “Flakey” Texture Paste and the Tim Holtz Circle Fade Stencil from the Mixed Media Kit this month to start building my background with a few random areas of texture where I was planning on adding my photos and clusters.

sbkit-moodboard-1 sbkit-moodboard-6

After the texture paste had dried, I mixed together each of the three PearlEx Powders from the Mixed Media Kit with water in a small palette to use as watercolors to add on and around the stenciling – then I just dipped into my three watercolors, let them move around on the background naturally and added a few extra splatters of the “Duo Aqua Blue” and “Sky Blue.” I also added a light coating of Workable Fixatif after my colors had dried to hold those powders in place.

sbkit-moodboard-2 sbkit-moodboard-5

As I started playing around with the elements I had decided to use, I realized I needed a little extra separation between the background and the photos, so I added some extra, torn-edge, pieces of paper as part of my layering process. I have my photos backed with some adhesive foam to help stabilize them, and then I just started positioning everything where I wanted it, then came in and added hot glue underneath the pieces – because I didn’t want to “forget” what I had originally planned if I tried taking everything off then rebuilding with the glue!

sbkit-moodboard-3 sbkit-moodboard-7

For the Tres Jolie Chipboard, I used a mix of the “Worn Jeans” Chalk Ink found in this month’s Cards, Tags, & More Kit, the three PearlEx Powders from the Mixed Media Kit, and clear embossing ink (refill bottle) and Extra Thick Embossing Powder from my stash. I started with the chalk ink, sprinkled, brushed, and watered down the PearlEx Powders while the ink was still wet, then decided what I really needed was some embossing – and that’s when I used my refill embossing ink to “paint” my powders in place before adding the Extra Thick Embossing Powder. Then I did it a second time – minus the chalk ink – so I have two layers of color and embossing powder!

After everything was in place and the hot glue had cooled down, I came back with my palette of “watercolors” to extend the areas of color and to blend in the torn pieces of paper I had added with my clusters and photos.

I hope you enjoyed this layout and it gave you some ideas of how you can use the mediums from the Mixed Media Kit and the “Everywhere” Collection from the Scrapbooking Kit!

Stay Crafty, Friends


Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!


Tres Jolie can also be found at:

Tres Jolie Facebook

Tres Jolie TikTok

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


Tres Jolie Insta Square Frame Tres Jolie Insta Square Frame

In addition to this month’s Scrapbooking Kit and Mixed Media Kit, I used:

StazOn “Jet Black,” Dear Lizzy Date Stamp, Tim Holtz Tiny Attacher, Finnabair Clear Gesso, Ranger Clear Extra Thick Embossing Powder, Ranger Clear Emboss-It Ink Refill Bottle, double-sided adhesive foam, Krylon Workable Fixatif, Art Glitter Glue, Gorilla Glue Gun & Glue Sticks

Tres Jolie Kit Club– Coaster Set–May 2023 Mixed media Kit

Hey, y’all! Have you opened your Tres Jolie May Mixed Media Kit yet? Have you seen all the creative fun you can have with it? I was over the moon excited when I saw the PearlEx powders! I love blues and teals! And a blank coaster set to decorate? How awesome is that? You can easily use these coasters as they are – just adding some kind of protective surface like epoxy resin (self-leveling!) when you have them decorated – or you can use them as mini-art boards and use them as home décor if you want! Endless possibilities!

However, I just already happened to have some square silicone coaster molds and epoxy resin, so I created a coaster set! I added some heavy white gesso from my stash, used the Tim Holtz stencils, Seth Apter texture paste, and the PearlEx “MicroPearl” powder from the kit, and decorated one side of the Dress My Craft coasters. I have a process video for you, make sure to check it out!

coasters-6



Creating these coasters wasn’t at all very difficult! Waiting for the epoxy resin to cure was the most time-consuming! I hadn’t originally planned on using the silicone molds I’ve had for a few years now, but after I added the texture paste to the coaster blanks, I decided to see how well they would fit into the molds. They weren’t a “perfect” fit – the blanks were a hair larger – but I decided it was close enough for me to work with!

texture paste pearlex

To start, I coated one side of the coasters with some heavy gesso, and after the gesso had dried, I added random stenciling using the Tim Holtz Stencils and Seth Apter Texture paste found in this month’s kit.

While the texture paste was still wet, I sprinkled on some of the “MicroPearl” PearlEx Powder, spritzed it with water, and then let everything air dry.

epoxy1 epoxy2 epoxy3

I started my resin process by only adding a thin layer to the mold and letting the resin pool whichever way it decided to. Then, on the now-hardened pools of resin, I added some of the Transfer Me pieces. The next step was to add some color! After I mixed up a batch of resin, I separated some of it into three small cups so I could mix in the three PearlEx powders. I didn’t stir my colors together in the mold, instead, I pressed the texture paste coated coasters in and let any extra just flow over the bottom – which also has a lovely pattern!

coasters-1

After this batch of resin had cured, I unmolded the coasters and added more of the Transfer Me designs to the surface.

coasters-2 coasters-4

To seal up and protect the final Transfer Me design, I used my gloved hands to spread a light coating of epoxy across the surface.

coasters-3 coasters-5

I will be taking my coaster out to the workshop to smooth out the bottom edges a little from when I pushed the Dress My Craft coasters into the molds and then adding a second thin coat of resin all over the surface of the coaster, but overall, these coasters are done! If my resin hadn’t tried to get away from me too badly when I squished the Dress My Craft coasters in, I don’t think I would have even had to do any cleanup!

coasters-7

Thank you for joining me here on the blog today! I hope you enjoyed my coaster-making process and it gave you some ideas of what you can do with all the goodies found in this month’s Mixed Media Kit!

Stay Crafty, Friends


Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!


Tres Jolie can also be found at:

Tres Jolie Facebook

Tres Jolie TikTok

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


Tres Jolie Insta Square Frame

In addition to this month’s Mixed Media Kit, I used (from previous Tres Jolie Kits):

Finnabair Heavy White Gesso, Amulite Amazing Clear Cast Epoxy, unbranded coaster molds, spray bottle

Tres Jolie Kit Club–Mini Pocket Album–May 2023 Cards, Tags, & More Kit

Hey, y’all! For my first May project, I have a mini pocket album inspired by the “Tea Book Ephemera Organiser’s” from Bohemian Crafting! When I saw the original video, I knew I had to make my own little book! Not only is this an adorable little book/album, but it is also easy to put together!

Make sure to check out my video and see it all come together!

may2023-miniAlbum-01



For my cover, I used a piece of poster board from when my kids were in school. It’s flexible, yet sturdy – I’m not very good and guessing the weight of paper, but I do know it isn’t as thick as the 130# cover stock I like to use as card bases!

I cut out a 10-inch by 8-1/4-inch rectangle from the poster board, then on the 10-inch side, I scored at 4-1/2-inches, rotated the cover 180 degrees, and scored at 4-1/2-inches again. You could also score at 4-1/2 inches and 5-1/2-inches if you didn’t want to rotate your cover piece, I only rotated mine to make sure I had the front and back flaps of the cover as close to equal as I could get! This way, if my original cut wasn’t “exactly” 10 inches, my front and back cover would still be 4-1/2 inches, and any “excess” would just find its way to the spine!

may2023-miniAlbum-07


I picked out the papers I wanted to use for my cover and cut four 4-1/2-inch by 3-inch rectangles out of the floral paper and two 4-1/2-inch by 2-1/4-inch rectangles out of the orange-ish paper. I added the extra 1/4-inch to the orange-ish paper to give a little bit of extra to work with to make sure I didn’t have any gaps – which is also why I glued it down before the floral paper! I didn’t glue the paper down to the spine until after I had the pages stitched in, because I knew I wanted to cover all the thread.

After the outer papers were glued to the front and back cover, I poked some stitch holes and added some simple stitches using 6-strand embroidery floss (I used all 6 strands!). Then I picked out the papers for the inside of the covers, cut the background papers just long enough to have the edge hidden by the 3-inch pockets, glued them to the cover, and added the pockets.

may2023-miniAlbum-04 may2023-miniAlbum-05 may2023-miniAlbum-06

I have three different pocket page sizes – 3, 3-1/2, and 4 inches – made from 6”x6”, 7”x7”, and 8”x8” squares of paper. And, regardless of the finished size, they were all made the same – folded in half, then half again! This gives an opening at one long edge of the paper (the top of my pockets) and the two short, outer edges. To seal the outer edges, I didn’t glue them closed, I used leftover strips of the BoBunny paper, solid cardstock, and BoBunny stickers to hold them closed. As an optional step, you can also use a circle punch – or just scissors – to add thumb holes to the top edge of the pockets! I inked the edges of my pages, and since it is chalk ink, I have my pockets a spray of Workable Fixatif to help the chalky finish stay in place.

may2023-miniAlbum-03

After I had the edges sealed, I added a strip of green cardstock to the inside spine and finally stitched my pages to the spine through the holes I had pre-poked using a template I had made to help me keep my pages centered and evenly spaced. Each page has two holes for stitching through – 1/4” from the top and bottom of the pocket – and I just used simple straight stitching to hold them in.

Once the stitching was done, I finally added the papers I had picked for the spine to cover my thread.

may2023-miniAlbum-08

After the pages were sealed, I used more of my scrap pieces –the solid cutoffs stamped with one of Tim Holtz’s newest stamps – and some of the stickers to add some simple decoration to the pages and cover – sometimes adding another wrap around the edge, sometimes creating tabs for the edges. On the cover I also used one of the Tres Jolie Chipboard pieces, coated with clear gesso from my stash, the Faded Jeans Chalk Ink from the kit, and a little clear embossing powder, and with some of the KaiserCraft pearls on the stem.

Thank you for joining me here today, I hope you enjoyed this mini pocket page album and it gave you some ideas of what you can make using this month’s Cards, Tags, & More Kit!

Stay Crafty, Friends


Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!


Tres Jolie can also be found at:

Tres Jolie Facebook

Tres Jolie TikTok

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


Tres Jolie Insta Square Frame

In addition to this month’s Cards, Tags, & More Kit, I used:

Finnabair Clear Gesso, Tim Holtz “Floral Trims” Stamps, Fiskars 1.5” Circle Punch, We R Memory Keepers Tab Punch, We R Memory Keepers Corner Chomper, Hampton Art Clear Embossing Powder, UHU Stic, Art Glitter Glue, JudiKins Diamond Glaze, double-sided tape, Krylon Workable Fixatif, Liquitex Matte Varnish, 3M Durapore Tape

Reveal Day! – Tres Jolie Kit Club–May 2023 Kits!

Hey, y’all! Is it May already? WOW! But at least that means it’s time for new Tres Jolie Kits! YAY! As always, these kits are FAB-U-LOUS and perfect for your May creations!

Summer is drawing nearer, soon the season of swimming, bar-b-que’s, and campfires will be in full swing! Make sure you have your Tres Jolie Kit Club kits so you can create your summer memory crafts and preserve your summer memories! Be sure to get your kits before they’re gone! Or, better yet, subscribe to Tres Jolie Kit Club so you will never miss a kit!

Be sure you follow us on all social media platforms (Tres Jolie Kit Club links at the end of the post; Corner Scraps links to the right) and have joined the Tres Jolie Kit Club Facebook Café so you won’t miss a single announcement or project created with these kits.

Kit Reveal Banner

The May 2023 Scrapbooking Kit is filled with the wonderful 12”x12” Collection Pack, Laser Cut Elements, and Tag Set from 49 & Market’s Everywhere line! You will also find 49 & Market coordinating flower packs, and fabulous Tres Jolie Chipboard geotags and compass pieces! As always, these papers will be amazing for all your upcoming projects, whether they are beautiful layouts, junk journals, cards, or anything in between! You will find a lovely assortment of patterned papers and perfectly coordinated embellishments.

In the Mixed Media Kit, you will find beautiful PearlEx Pigment Powders in Micropearl, Aqua-Blue, and Sky Blue! These pigment powders will add beautiful color to the Izink Flakey Texture Paste by Seth Apter if you choose or can be used to add some accent color to the Dress My Craft Transfer Me 3D White Damask’s. Decorate the coaster blanks from Dress My Craft using the Tim Holtz Mini Stencils, and add more or a different, texture with some art stones! No matter what you decide to do, the Mixed Media Kit is sure to give you hours of happy craft time!

In the Cards, Tags, & More Kit, you will find a 6”x8” patterned paper pad and cardstock stickers from BoBunny’s Garden Grove collection that you can use to create unique cards using the solid cardstock sheets from the kit, decorate the tags found in the kit, create some ATCs, or whatever you can think of! Who doesn’t like creating a variety of projects from one kit?

These kits are for the beginner to the advanced; from clean and simple – to mixed media maven. No matter your style, there is something for everyone. We know you are going to love it!


And now (drumroll, please) the May 2023 Kits from Tres Jolie:

Tres Jolie Insta Square Frame

Scrapbooking Kit

Tres Jolie Insta Square Frame

Mixed Media Kit

Tres Jolie Insta Square Frame

Cards, Tags, & More Kit


Don’t forget to stop by the Tres Jolie YouTube channel and see our video reveal for all our kits.

Love them, right?!?! You can still get one of your own (some kits are in very limited quantities). Become a subscriber and you will never miss out on our gorgeous, coordinated kits. Just visit Tres Jolie Subscribe.


The designers at Tres Jolie have created some amazing layouts and projects with this kit. I have had a busy April, but I have one sneak peek for you!

album-sneak


Please stop by the other designer’s blog to check out their sneak peeks:


We have a new mood board challenge for the month, with the following rules and guidelines:

Tres Jolie Mood Board

moodboard


Place your entries in the April 2023 challenge folder on the Tres Jolie Kit Club Café Facebook page. This challenge ends on April 30th, 2023 at 11:59 pm CDT. All entries must be in this folder to be eligible for the prize (to have everyone eligible to win, we limit the same winner to once every 3 months).


Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!


Tres Jolie can also be found at:

Tres Jolie Facebook

Tres Jolie TikTok

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


All the designers will be revealing their projects on the Tres Jolie Blog all month. Be sure you join us for tons of inspiration, including video and photo tutorials. Also, make sure you check out the newest Tres Jolie Chipboard designs that were just added to the store.