Tres Jolie Kit Club–Cottage Life Cards–July 2022 Cards, Tags, & More Kit

Hey, y’all! We’ve made it to the end of July, and are that much closer to the end of this oppressive summer heat! (I hope!!)⁠

For my last project using the July 2022 Cards, Tags, & More Kit from Tres Jolie Kit Club, I used up the bits and pieces of the Graphic 45 “Cottage Life” papers I had, along with some cardstock, dies, and mediums from my stash, to create some cards & envelopes.⁠

G45cards-jul22ctm-11

To get all the details of what I did for these cards, check out my video!


Video:


All of the cards are rather straightforward. I used my last two uncut sheets of the “Cottage Life” paper to make two envelopes for 3-1/2”x6” cards – the largest size envelope that can be made using an 8”x8” sheet on the We R Memory Keepers Envelope Punch Board – and used two pre-made envelopes and card blanks for the other two cards.

This first card is made with some metallic cardstock from DCWV and decorated using the TCW stencil from June’s Mixed Media Kit, texture paste from my stash, and embossing powder. I sprinkled the embossing powder on the texture paste while it was still wet, and waited until it dried before heating it up. Although you can heat dry texture paste on its own, because you can keep the heat farther away and in constant motion, it doesn’t work as well when the paste is topped with embossing powder! The heat needed for embossing powder – or rather the heating method – can, and generally will cause the wet texture paste to form bubbles.

G45cards-jul22ctm-05 G45cards-jul22ctm-06

After my embossing powder was heated and cooled, I sprinkled on some of Lindy’s “Bavarian Blue” Magical Powder that is in this month’s Mixed Media Kit, gave it a spray of water, and let it spread out between the stenciling! I had the framed phrase that I made when I was working on the “Cottage Life” décor piece (the project posted on the 21st), so I added it to my card front and stamped a simple sentiment on a strip of cardstock to finish out my card front.

For the envelope, I used a Vicki Boutin stamp and die set from my stash to create the little windows. Before I folded the envelope up, I used the rose die to make the windows in the envelope and glued in some faux glassine that I had stamped and embossed with the coordinating rose stamp.

G45cards-jul22ctm-01

I didn’t do anything to the envelope for this card except fold it! Honestly, I just couldn’t think of anything I wanted to have premade, and decided to wait until the time came to use it!

For the card, all I did was cut a couple of the wider strips of the patterned paper to the length I needed and a strip of cardstock to the length and width I needed for the top section with the sentiment. Before I added the cardstock with the sentiment, I added some “Mowed Lawn” Distress Oxide Spray to the patterned paper. I didn’t intend to add so much, sometimes my hands have a mind of their own! Anyhow, I just wet it and mopped it up a bit. It was already there, so I just worked with what I had!

After I stamped my sentiment, I decided I wanted to have it stand out more, so I traced it all with a metallic pen, then I added my mini pearls, and this card was done.

The next two cards were made using some card and envelope blanks by Recollections from my stash.

G45cards-jul22ctm-08 G45cards-jul22ctm-07

For this card, I grabbed my 1.5” hexagon punch, a set of hexagon dies, and my bird silhouette dies. I didn’t want to cover the whole front of the card with hexagons, so I just randomly placed them in a way that I thought looked good and added my birds. To make the birds stand out, I hand drew a line for them to stand one, outlined them in coordinating metallic pens, and then used a dark grey pen for their shadows – just smearing out it with my finger. I stamped the sentiment on a little piece of my homemade glassine and added it to the card front. Super quick and easy card!

For the envelope, I place my hexagon dies inside the envelope so I could cut out some windows, added my birds, and then backed them with some of my homemade glassine.

G45cards-jul22ctm-09 G45cards-jul22ctm-10

For the fourth and final card, I just filled up the card front with blocks of the patterned paper and added a few flowers tucked under the chipboard piece. Very quick and easy card front – especially with the use of a pre-made card base!

The envelope wasn’t as quick and easy! When I first started playing with the faux glassine technique I learned from Nik the Booksmith, I had used this cute little stamp from my stash to stamp on a piece of tracing paper, then used some colored pencils to fill it in before spraying it with the glossy spray and turning it into a [faux] glassine print! Since I had already cut it in half (I had been thinking of doing something else with it originally) I decided that I needed to create a window pane for my envelope.

For the cute little scene “outside” the window, I wrapped some blue-ish faux glassine (created previously using the wax method) around the white side of a piece of the cover from the Graphic 45 stack and placed it behind my showering squirrels! I also have some foliage bits along the bottom that I was able to cut from some of the green print. Not a lot, because my die was bigger than the piece of paper I had to work with, but there is some there!

After I cut out four rectangles from my envelope to create the window opening and gluing in my squirrels, I added in strips of the patterned paper to help bring it to life … and also possibly because my craft knife got away from me and I accidentally cut across one of the cross pieces so I had to find a way to put my window back together! Rolling on the floor laughing Well, that led me to then having to make sure my edges were all evenly sized so I added the blue strips of patterned paper and finally made four, 3/8” wide strips of the paper used around the outer edge.

G45cards-jul22ctm-04 G45cards-jul22ctm-02 G45cards-jul22ctm-03 G45cards-jul22ctm-12

Thank you for joining me here in my corner! I hope these cards inspired you and gave you some ideas of what you can do using the Graphic 45 paper and chipboard found in this month’s Cards, Tags, & More Kit.

Stay Crafty, Friends


Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!


Tres Jolie can also be found at:

Tres Jolie Facebook

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


Tres Jolie Insta Square Frame

In addition to the items from this month’s Cards, Tags, & More Kit and a little from this month’s Mixed Media Kit (*from previous Tres Jolie Kits), I used:

Disclaimer: Some [non-Tres Jolie] items may contain an affiliate link, allowing me to earn a small commission at no extra cost to you!

TCW Slimline Stencil “Circular Rings” , BoBunny “Sentiments With Love” Stamp Set , Gary M Burlin Co. “Patina Bronzed Copper” Embossing Powder , Prima *“Watercolor Floral” Flowers , Eyelet Outlet Jewels Multi Pearls “Green” , Ranger *Letter It “Party” Clear Stamps , Stampendous “Squirrel Shower” Cling Stamp , Vicki Boutin “All The Good Things” Stamp & Die Set 2 , Distress Oxide “Prize Ribbon” , Distress Oxide “Mowed Lawn” , Distress Oxide Spray “Mowed Lawn” , Ranger Texture Paste “Opaque Matte” , Simon Says Stamp “Barely Beige” , StazOn “Olive Green” , Recollections Value Pack Cards & Envelopes “Kraft” & “Ivory” , Tim Holtz “Silhouette Birds” Thinlits , Tim Holtz “Flower Field” Thinlints , Tim Holtz Stamp Platform , EK Tools Score Board , We R Memory Keepers Envelope Punch Board & Craft Knife , Sizzix Big Shot Plus , Fiskars 1.5” Hexagon Squeeze Punch , DCWV “Linen Closet” Cardstock Stack , Sakura Gelly Roll Metallic , Gelly Roll Glaze , & Gelly Roll Souffle , Faber-Castell “Black” PITT Artist Pens , Aleene’s Tacky Glue , JudiKins Diamond Glaze , Art Glitter Glue , Mod Podge Gloss Clear Acrylic Sealer , double-sided adhesive foam squares , 1/4” double-sided tape

Tres Jolie Kit Club–Cottage Life Décor–July 2022 Cards, Tags, & More Kit

Hey, y’all! If you’re in the Northern Hemisphere of this rotating blue marble, I hope you’re staying cool! If you’re in the Southern Hemisphere, just know I’m jealous! I am just counting down the days until I can see highs under 100°F (38°C). I am fortunate enough to have some AC though, which I know not everyone has.

This week I have a “Cottage Life” Décor piece I made using this month’s Cards, Tags, & More Kit, and a deep frame that has existed since sometime in the 80s (the company is no longer in business, that I’m aware of), and some mediums from my stash.

cttgLfe-frm-jul22ctm-01

Check out my video to see what I did to put this adorably vintage “Cottage Life” frame together!


Video:


cttgLfe-frm-jul22ctm-02 cttgLfe-frm-jul22ctm-05 cttgLfe-frm-jul22ctm-03

Now, y’all know I love using every part of the kits – packaging, scraps, etc. – and this project was no different! I loved the shapes of the Graphic 45 Chipboard pieces, and thought they would make some fantastic vintage frames – and they did! I, very carefully, cut along the outside of the negative space where the chipboard piece had been, eyeballing my distance, and to strengthen my new frames, and start them on their patinaed copper journey, I used some “Patina Bronzed Copper” embossing powder on them. After they were embossed, I backed them with different pieces of patterned paper.

cttgLfe-frm-jul22ctm-11 cttgLfe-frm-jul22ctm-07

After my “Cottage Life” Folio (July 7th post), I had quite a few strips of paper, so I got them evened up and made a collage of them on a 5inx7in canvas board to use as the background for my frame.

Aren’t those Tres Jolie Chipboard gnomes adorable? I had to add them to my “garden,” so I did the same to them that I had done to my frames – I embossed them to give them a bit more strength and stability – and to make them copper so they could start their patina journey.

cttgLfe-frm-jul22ctm-14 cttgLfe-frm-jul22ctm-08 cttgLfe-frm-jul22ctm-15

For my frame, I didn’t want it completely rough, but I didn’t want it completely smooth either, so I randomly added some Finnabair “White Sand” texture paste before giving it a coat with some white gesso, “Steampunk Copper” paint, and a touch of “Brass” Patina Effect Paste.

To raise up all of my frame and gnome layers, I used hot glue because it is sturdy, and there is only a cooling time, not a long dry time – plus, when it’s hot it’s “stretchy,” which means I was able to make a pile of it, then use both hands to adjust the frames exactly how I wanted them. I was careful to keep the hot glue away from the embossed areas though because I didn’t want it to reactivate!

cttgLfe-frm-jul22ctm-13 cttgLfe-frm-jul22ctm-09

You can see I left no surface bare! Since this is an open-front, deep frame, I wanted to make sure I had the inside of the frame matching the outside. After the canvas was together and the paint was dry on the frame I started adding my waxes – some “Rich Copper,” some “Patina Green.”

cttgLfe-frm-jul22ctm-04 cttgLfe-frm-jul22ctm-10 cttgLfe-frm-jul22ctm-06

When it came time to add the frame to the canvas, I used hot glue at the corners to get it in place and to hold the canvas even with the back of the frame so I could turn it over and fill in around the edges with some 3D Gel.

After the 3D Gel had dried, I turned my frame back over and popped on the final, front chipboard piece using more 3D Gel.

cttgLfe-frm-jul22ctm-12

Thank you for joining me here in my corner, I hope you enjoyed this “Cottage Life” décor piece and it gave you some ideas of what you can make using this month’s Cards, Tags, & More Kit.

Stay Crafty (and cool & hydrated!), Friends


Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!


Tres Jolie can also be found at:

Tres Jolie Facebook

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


Tres Jolie Insta Square Frame

In addition to the items from this month’s Cards, Tags, & More Kit (*from previous Tres Jolie Kits), I used:

**Some [non-Tres Jolie] items contain an affiliate link that allows me to earn a small commission at no extra cost to you!

Prima-Finnabair “White Sand” Texture Paste, “Steampunk Copper” Metallique Paint, “Brass” Patina Effect Paste, “Rich Copper” Metallique Wax, “Patina Green” Matte Wax, Gary M. Burlin Co. “Patina Bronzed Copper” Embossing Powder, 3D Matte Gel, Blick Art Materials 5”x7” canvas board, Simon Says Stamp Clear Embossing Ink, Daler Rowney White Gesso, Liquitex Matte Medium, Krylon Kamar Varnish, Krylon Matte Finish, Krylon Triple-Thick Crystal Clear Glaze, JudiKins DiamondGlaze, hot glue gun, Gorilla Mini hot glue sticks, The Creative Circle 5”x7” Frame (company no longer exists as far as I am aware)

Tres Jolie Kit Club-Cards, Cards, Cards!-July 2021 Cards, Tags, & More Kit

Hey, all! I hope you had a craft-astic July and we were able to inspire you to go out and create!
For my third Cards, Tags, & More Kit project, I have a few cards, a few different ways!

FRAMED-20210619_095329

Check out my video to see my thoughts and process for all these cards!


Video:


Now for the close-ups and a few details for each card!

FRAMED-20210619_095551

FRAMED-20210619_095609

These two cards are some basic, “flat” cards. The “Happy Birthday” card is a 4-3/4”x4-3/4” square with just a piece of the striped cardstock, a doily die cut, and a piece of vellum with the greeting embossed. The “Let’s Celebrate!” is just stamped straight on the cardstock. I used a die from my stash with the Sizzix Emboss & Transfer set to add a little dimension to those birds being “pushed through” the gold cardstock.

FRAMED-20210619_095448

FRAMED-20210619_095730

The flowers from the kit get featured with these two cards! The “Hooray” cards is a little more fun with the flourish coming out from under the flower! The vertical card is more elegant, with some bits of lace dangling with the leaves.

FRAMED-20210619_095628

FRAMED-20210619_095650

Both of these cards of pieced together background, using strips of cardstock I had leftover from my previous projects! I cut some rosettes for the slimline card—giving it the “Party” feeling. The “imagine” card is another “flat” card, but those stars are just perfect to “make a wish” on.

FRAMED-20210619_095423

FRAMED-20210619_095528

These two cards sum up my feelings about cake! Lucky and Yay!! For the card on the left I used the negative cuts from the sheet of cardstock from my first project and added in some doliy cuts to create the background. I used my hexagon punches and any bit of “scrap” cardstock I could find to create the background for the card on the right. To cards with the same greetings, but totally different looks!

FRAMED-20210619_095817

I hope you enjoyed this project, and all of the projects this month, and they gave you some ideas of what you can do with the July Kits from Tres Jolie!

Stay Crafty, Friends


Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!


Tres Jolie can be found at the following places:

Tres Jolie Facebook

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


In addition to items from this month’s Cards, Tags, & More Kit (*from previous Tres Jolie Kits), I used:

*Prima Rub-On Foils, *lace trim, Spellbinders “Flower Garden” Die, Heidi Swapp “Imagine” Die, Concord & 9th “Lucky” Dies, Sizzix/Tim Holtz “Rosettes” & “Skeleton Leaves,” Fiskars Hexagon Punches 1” & 1-1/2”, Martha Stewart “Carnelian” Glitter, Sizzix Big Shot Plus, Sizzix Emboss & Transfer Set, Ranger Embossing Powders “White” & “Gold,” *Gary M. Burlin Co. “Patina Bronzed Copper” Embossing Powder, Simon Says Stamp Clear Embossing Ink, StazOn “Timber Brown,” Scotch ATG, hot glue gun, double-sided sticky foam squares, Tim Holtz Stamp Platform, Art Glitter Glue, FabriTac, Scrapbook Adhesives 12×12 Adhesive Sheets, Ranger Brayer, Spellbinders Tool ‘n One, EK Tools Scoreboard, various cardstock for card bases, orange sequins, Lawn Fawn Stamp Shammy, scrap vellum (some of it Bazzill), adhesive foam sheet