Tres Jolie Kit Club–Cottage Life Cards–July 2022 Cards, Tags, & More Kit

Hey, y’all! We’ve made it to the end of July, and are that much closer to the end of this oppressive summer heat! (I hope!!)⁠

For my last project using the July 2022 Cards, Tags, & More Kit from Tres Jolie Kit Club, I used up the bits and pieces of the Graphic 45 “Cottage Life” papers I had, along with some cardstock, dies, and mediums from my stash, to create some cards & envelopes.⁠

G45cards-jul22ctm-11

To get all the details of what I did for these cards, check out my video!


Video:


All of the cards are rather straightforward. I used my last two uncut sheets of the “Cottage Life” paper to make two envelopes for 3-1/2”x6” cards – the largest size envelope that can be made using an 8”x8” sheet on the We R Memory Keepers Envelope Punch Board – and used two pre-made envelopes and card blanks for the other two cards.

This first card is made with some metallic cardstock from DCWV and decorated using the TCW stencil from June’s Mixed Media Kit, texture paste from my stash, and embossing powder. I sprinkled the embossing powder on the texture paste while it was still wet, and waited until it dried before heating it up. Although you can heat dry texture paste on its own, because you can keep the heat farther away and in constant motion, it doesn’t work as well when the paste is topped with embossing powder! The heat needed for embossing powder – or rather the heating method – can, and generally will cause the wet texture paste to form bubbles.

G45cards-jul22ctm-05 G45cards-jul22ctm-06

After my embossing powder was heated and cooled, I sprinkled on some of Lindy’s “Bavarian Blue” Magical Powder that is in this month’s Mixed Media Kit, gave it a spray of water, and let it spread out between the stenciling! I had the framed phrase that I made when I was working on the “Cottage Life” décor piece (the project posted on the 21st), so I added it to my card front and stamped a simple sentiment on a strip of cardstock to finish out my card front.

For the envelope, I used a Vicki Boutin stamp and die set from my stash to create the little windows. Before I folded the envelope up, I used the rose die to make the windows in the envelope and glued in some faux glassine that I had stamped and embossed with the coordinating rose stamp.

G45cards-jul22ctm-01

I didn’t do anything to the envelope for this card except fold it! Honestly, I just couldn’t think of anything I wanted to have premade, and decided to wait until the time came to use it!

For the card, all I did was cut a couple of the wider strips of the patterned paper to the length I needed and a strip of cardstock to the length and width I needed for the top section with the sentiment. Before I added the cardstock with the sentiment, I added some “Mowed Lawn” Distress Oxide Spray to the patterned paper. I didn’t intend to add so much, sometimes my hands have a mind of their own! Anyhow, I just wet it and mopped it up a bit. It was already there, so I just worked with what I had!

After I stamped my sentiment, I decided I wanted to have it stand out more, so I traced it all with a metallic pen, then I added my mini pearls, and this card was done.

The next two cards were made using some card and envelope blanks by Recollections from my stash.

G45cards-jul22ctm-08 G45cards-jul22ctm-07

For this card, I grabbed my 1.5” hexagon punch, a set of hexagon dies, and my bird silhouette dies. I didn’t want to cover the whole front of the card with hexagons, so I just randomly placed them in a way that I thought looked good and added my birds. To make the birds stand out, I hand drew a line for them to stand one, outlined them in coordinating metallic pens, and then used a dark grey pen for their shadows – just smearing out it with my finger. I stamped the sentiment on a little piece of my homemade glassine and added it to the card front. Super quick and easy card!

For the envelope, I place my hexagon dies inside the envelope so I could cut out some windows, added my birds, and then backed them with some of my homemade glassine.

G45cards-jul22ctm-09 G45cards-jul22ctm-10

For the fourth and final card, I just filled up the card front with blocks of the patterned paper and added a few flowers tucked under the chipboard piece. Very quick and easy card front – especially with the use of a pre-made card base!

The envelope wasn’t as quick and easy! When I first started playing with the faux glassine technique I learned from Nik the Booksmith, I had used this cute little stamp from my stash to stamp on a piece of tracing paper, then used some colored pencils to fill it in before spraying it with the glossy spray and turning it into a [faux] glassine print! Since I had already cut it in half (I had been thinking of doing something else with it originally) I decided that I needed to create a window pane for my envelope.

For the cute little scene “outside” the window, I wrapped some blue-ish faux glassine (created previously using the wax method) around the white side of a piece of the cover from the Graphic 45 stack and placed it behind my showering squirrels! I also have some foliage bits along the bottom that I was able to cut from some of the green print. Not a lot, because my die was bigger than the piece of paper I had to work with, but there is some there!

After I cut out four rectangles from my envelope to create the window opening and gluing in my squirrels, I added in strips of the patterned paper to help bring it to life … and also possibly because my craft knife got away from me and I accidentally cut across one of the cross pieces so I had to find a way to put my window back together! Rolling on the floor laughing Well, that led me to then having to make sure my edges were all evenly sized so I added the blue strips of patterned paper and finally made four, 3/8” wide strips of the paper used around the outer edge.

G45cards-jul22ctm-04 G45cards-jul22ctm-02 G45cards-jul22ctm-03 G45cards-jul22ctm-12

Thank you for joining me here in my corner! I hope these cards inspired you and gave you some ideas of what you can do using the Graphic 45 paper and chipboard found in this month’s Cards, Tags, & More Kit.

Stay Crafty, Friends


Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!


Tres Jolie can also be found at:

Tres Jolie Facebook

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


Tres Jolie Insta Square Frame

In addition to the items from this month’s Cards, Tags, & More Kit and a little from this month’s Mixed Media Kit (*from previous Tres Jolie Kits), I used:

Disclaimer: Some [non-Tres Jolie] items may contain an affiliate link, allowing me to earn a small commission at no extra cost to you!

TCW Slimline Stencil “Circular Rings” , BoBunny “Sentiments With Love” Stamp Set , Gary M Burlin Co. “Patina Bronzed Copper” Embossing Powder , Prima *“Watercolor Floral” Flowers , Eyelet Outlet Jewels Multi Pearls “Green” , Ranger *Letter It “Party” Clear Stamps , Stampendous “Squirrel Shower” Cling Stamp , Vicki Boutin “All The Good Things” Stamp & Die Set 2 , Distress Oxide “Prize Ribbon” , Distress Oxide “Mowed Lawn” , Distress Oxide Spray “Mowed Lawn” , Ranger Texture Paste “Opaque Matte” , Simon Says Stamp “Barely Beige” , StazOn “Olive Green” , Recollections Value Pack Cards & Envelopes “Kraft” & “Ivory” , Tim Holtz “Silhouette Birds” Thinlits , Tim Holtz “Flower Field” Thinlints , Tim Holtz Stamp Platform , EK Tools Score Board , We R Memory Keepers Envelope Punch Board & Craft Knife , Sizzix Big Shot Plus , Fiskars 1.5” Hexagon Squeeze Punch , DCWV “Linen Closet” Cardstock Stack , Sakura Gelly Roll Metallic , Gelly Roll Glaze , & Gelly Roll Souffle , Faber-Castell “Black” PITT Artist Pens , Aleene’s Tacky Glue , JudiKins Diamond Glaze , Art Glitter Glue , Mod Podge Gloss Clear Acrylic Sealer , double-sided adhesive foam squares , 1/4” double-sided tape

Tres Jolie Kit Club–Tag Flip!-June 2022 Cards, Tags, & More Kit

Hey, y’all! I have my last project using this month’s Cards, Tags, & More Kit from Tres Jolie Kit Club for you today, a little, zipper-closed, tag flip book that is just perfect for jotting down notes to yourself – things you want to remember – ephemera you may want to tuck away, or just a little place to doodle in. This project is completely customizable – you can use whatever materials and colors you want. And the best part? It doesn’t even have to make sense to anybody else! It’s all you!

tagFlip-jun22ctm-04

I had quite a pile of tags already die-cut from my previous two Cards Kit projects this month that my original thought was to make a tag flip booklet that went on a book ring, but then I started laying out all my tags, and realized that what I really wanted to do was make something a little more interactive – and this was the result! Check out the video to see how I put it all together.


Video:


tagFlip-jun22ctm-01 tagFlip-jun22ctm-02

I still had a lot of die cuts left from my Memory Dex Cards, so I added them to this project. Both the butterfly on the front cover and the flower on the back were cut out of the leftover handmade paper I had from my Junk Journal project that was posted on the 9th. I added some of the Eyelet Outlet Jewels to my butterfly body and popped on a few of the Prima flowers. You can see the random, wayward stitching that I used for my zipper, who knows what kind of stitching I would have used if I had thought about a zipper closure before putting everything together!

tagFlip-jun22ctm-03

Want to add a bit of personalization to your cover material? For me, a paint pen was the way to go! A regular pen, or even a gel pen, wouldn’t work so well on this rough burlap, a marker would probably work some, but I think a paint pen was best because I can make dots just by holding the nib down and letting the paint pool.

tagFlip-jun22ctm-07 tagFlip-jun22ctm-05

I just grabbed up some washi tape I’ve had for years with quotes on it and ran it across all the back tags, then ran some silver dot washi across the top of the left side of the booklet, and the bottom of the right side to fill in a little more and give some shine. I added brads to my tag holes – mostly to use them up – and added random stitching on my KaiserCraft white cardstock tabs to give them some color.

tagFlip-jun22ctm-12

I had these little metal flips in my stash and decided to add them in with some silver brads to hold little stacks of the rest of the tags that weren’t sewn in as part of the booklet. You can also see that for some more personalization, I colored in the outer edge of my tab with a gel pen. No rhyme or reason, just grabbing up a pen that I felt like using at the moment! Having an assortment of pens comes in handy because it can also be a way to express the mood you’re feeling when adding to your booklet.

tagFlip-jun22ctm-11 tagFlip-jun22ctm-06

When it came time to put my third Cards Kit project of the month together, I found myself staring at tags and die-cuts I had already made on leftover handmade paper, and the beginning of an idea to do something that opened in more than one direction. I just started laying tags out, trying to build the “direction” of everything in my mind as I went, so I didn’t just make a booklet that had “pages” that turned from right-to-left. I cut off bits of the burlap and canvas to make flip-up, flip-downs, and flip-outs. When I ran my washi across, I wrapped it around the tags that were “pages” (not the ones made to flip up or down). I didn’t want to stamp on all of my tags, and I didn’t want to cover the whole surface – there needed to be someplace to write – so I left some of the tags bare and added in the rest of the tags I had cut.

tagFlip-jun22ctm-10 tagFlip-jun22ctm-09

With some of the smaller die cuts – either solid shapes or outlines/frames – that were from the KaiserCraft white cardstock, I added some of the silver polka-dot washi tape and some stitching around the edges. If it was just an outline, I folded the tape in half so it would stick to itself, and used it as the center of the die-cut, which was also folded in half.

tagFlip-jun22ctm-08

As you can see, there are loads of places to write little notes or tuck in bits of ephemera you want to keep!

Thank you for joining me here in my little corner, I hope you enjoyed this little tag flip booklet and it gave you some ideas for making your own personalized little booklet.

Stay Crafty, Friends


Corner Scraps can also be found at:

Corner Scraps Studio Etsy

Corner Scraps Instagram

Corner Scraps Facebook

Corner Scraps YouTube

Corner Scraps Pinterest

Tres Jolie can also be found at:

Tres Jolie Facebook

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


Tres Jolie Insta Square Frame

In addition to the items from this month’s Cards, Tags, & More Kit (*from previous Tres Jolie Kits), I used:

Some items (non-Tres Jolie) contain an affiliate link where I earn a small commission at no extra cost to you!

*49 & Market “Cream” Burlap Ribbon; Canvas Corp Canvas Fringe; Hazel & Ruby Fat Roll “Quote Me;” Scotch Silver Polka Dot Washi Tape; Aleene’s Tacky Glue; JudiKins Diamond Glaze; paperclips; brads; metal tabs; handmade paper; thread

Tres Jolie Kit Club–Tag Folio!-June 2022 Cards, Tags, & More Kit

Hey, y’all!

Welcome to June! Did you get a chance to check out the kit reveals yesterday? This month’s kits are just fab!

For my first June project, I made a little tag-filled folio using this month’s Cards, Tags, & More Kit from Tres Jolie Kit Club, a few extras from my stash (ink, thread, & eyelets), and a cut file I created (I have the measurements I used listed below!).

So, grab your supplies and make yourself a little tag-folio!

tagFolio-Jun2022-01

I have a two-part tutorial (well, I talked a lot at any rate!) for this folio, part 1 is the tag cutting and base construction, and part 2 is the decorating and final touches. I go over cutting your folio base by hand if you aren’t using an electronic cutting machine, and my assembly process when putting everything together.


Part 1: Tag Cutting & Base Construction

Part 2: Decorating & Final Touches


tagFolio-Jun2022-02

tagFolio-Jun2022-03

First, a quick look at all the tags I made for my folio. I die cut a full sheet of the white cardstock, and six sheets of the patterned paper into a variety of tags – some to use this week, some to have ready for the rest of my projects this month. I used the white tags as my base, tore the patterned paper tags at about a 1/3rd – 2/3rd split, and mixed and matched the sides. I have had those butterfly eyelets for years now, and I thought it was about time to use some up, so I popped them into the holes on the tags.

I used a full sheet of the white cardstock to make my base. I have vertical score lines at 3-3/4”, 4”, 4-1/4”, 7-3/4”, 8”, and 8-1/4” and a horizontal score line 6” from the top. I didn’t cut the bottom 1/2” with the barcode and “KaiserCraft” off my sheet, so I have a score line at 12” also. I actually used that little bit during the construction to “protect” the bottom edges of my pockets during construction! Check out the image below to see all the measurements, plus I have some slot placement templates.

tagFolio-baseDimension


Slot Measurements:

tagFolio-slotDimension


Slot positioning templates are available as a PDF from my personal (non-Tres Jolie!!) DropBox for personal use only, please (attribution appreciated, but not required). When printed, the panels should be 4”x6” for an easy lineup with your edges and score lines – although printers & printer settings may vary! (Note: when testing, I made sure to print “actual size” from the printer dialog box and not “to fit” because Adobe and/or my printer wanted to make the 8-1/2”x11” image smaller to fit with margins on an 8-1/2”x11” sheet of paper!)

base-slot-templates-printable-pg1

base-slot-templates-printable-pg2


I made a pocket for each slot of my folio, but I have also added the measurements for alternate pockets so you have a variety to choose from:

tagFolio-sixPocketDimension

*Measurements are to the center of the slot*

tagFolio-pocketOptions



Part 1 of my videos covers the construction of the folio base, so I’ll just add some refresher details here on the blog. I lined my pockets up carefully, and got them in place – they are sized to be able to just be folded in half to fit – more or less – there may be a couple that requires some tweaking by folding slightly more than half. I used a combination of double-sided tape and glue to hold everything together – because I like adhesion! You could easily put it all together with just one or the other!!

Before I folded the folio over to close it up, I added a length of the seam binding from the kit across the middle, cut a slot in the hinge between the middle and last panel so I could feed the seam binding through and I would be able to tie it together when that last panel was folded in. For the end of the seam binding that came out of the edge of the folio, I added a couple of tiny staples to help keep it in place through all the tying.

I wanted to reinforce the hinges some, but I didn’t want to add a lot of bulk, so I used the cover sheet from the paper pack to reinforce the hinges on the [folded over] inside of the folio and to reinforce and add some more color to the hinges between the panels on the [visible] inside of the folio. After I had the folio folded in half and glued together, I added the last bit of seam binding to the outside of my hinges to help reinforce all the bending of the paper and cardstock.

tagFolio-Jun2022-10

tagFolio-Jun2022-06


With my base finally put together, it was time to start getting the finishing touches done, so I added the papers I had chosen for the outside of the folio. Since I was going to be adding stitching around my edge, I didn’t worry about making sure my adhesive went all the way to the edge, if you aren’t going to add stitching, you will want to make sure you have a secure seal so your cover paper doesn’t pull up!

Even though I wasn’t going to be doing my stitching yet, I wanted to get my holes made so I would know where my stitching would be, so I made a template that would help me make sure everything was spaced evenly and lined up where I wanted them. You can grab that template as a PDF from my personal DropBox if you would like to use it for your personal folio. I have it made to print on two sheets, with a little overlap in the middle to help line the holes up. Printers being what they are, you may or may not get lucky enough to have it print “perfect!” I didn’t get that lucky, but my second page was only a hair “off” so it wasn’t a big problem. (Note: Just like with the slot templates, make sure you print “actual size” and not “to fit”!)

After my holes were all poked through, I cut some 3/16” stripes of white cardstock and a 1/8” strip to use as a spacer so I could even out how my hinge papers looked. I used the 1/8” strip to add the space between the edges of the holes and the edge of the 3/16” strip. I also added 3/16” strips to the outer [vertical] edges so my slot reinforcements would sit evenly (I also have a layer of cardstock under slot reinforcements – so my tag slots are super reinforced now!). I inked up my slot covers and glued them in place.

tagFolio-reinforceDimension

tagFolio-Jun2022-09

tagFolio-Jun2022-12

stitchGuide

Now it was finally time to start thinking about how I wanted to decorate the folio, and which finishing touches I wanted to add. I used my “Royal Purple” StazOn to stamp my butterfly images and to dye my seam binding tie closure. For my main image/cluster, I go over getting permanent ink to bleed out and create the shadow effect in the second video. A helpful “fix” for images that don’t stamp clearly! (Personally, if I were to do this project again, I would add my stamping to the cover paper before adding it to the folio. It was all the pocket layers that caused the stamping issues because it was no longer flat!) Anyhow, even if something goes “wrong,” there is always a “fix.” In this case, I used some 91% isopropyl (rubbing) alcohol to cause my StazOn to bleed. I added my inks to the cardstock, then stamped the image on and fussy cut it out. The flowers and leaves are glued flat to the surface, offset just a touch to give a shadow effect, and the butterfly is popped up on some foam. The rest of the images I just stamped and left however they came out. (I did use a strip of cardstock to protect my seam binding covered hinges when I wanted to stamp across them.) I popped on some of the orange pearls and thought about what I wanted to add to the panel that folds in.

tagFolio-Jun2022-04 tagFolio-Jun2022-11

On that third panel that folds in, I didn’t want to just leave it blank, so I added a couple of the tags I had cut out. I glued the middle-sized tag on white cardstock near the bottom horizontally and added a tag in the next size up (second largest) as a flap with a simple tab added on. The “bloom” was stamped using the P13 stamp set that had been in February’s Cards, Tags, & More Kit.

tagFolio-Jun2022-07

tagFolio-Jun2022-08

Finally, I decided it was time to add my stitching! I just have a simple blanket stitch around the outside of the folio and some straight stitching along the hinges. I added some extra stitching to wrap up the corners of the folio, and added the last little bits to the decoration – the Prima flowers under the butterfly wings, and the green pearls along the bottom of the tag flap. With all that done, I added my tags to their slots and closed it all up!

tagFolio-Jun2022-05

Thank you for joining me here in my corner, I hope you enjoyed this folio project and have a chance to check out the videos that accompany it! Don’t forget to check out my Etsy shop to get the discounted cut file!

Stay Crafty, Friends


Corner Scraps can also be found at:

Corner Scraps Studio Etsy

Corner Scraps Instagram

Corner Scraps Facebook

Corner Scraps YouTube

Corner Scraps Pinterest

Tres Jolie can also be found at:

Tres Jolie Facebook

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


Tres Jolie Insta Square Frame

In addition to this month’s Cards, Tags, & More Kit (*from previous Tres Jolie Kits), I used (some non-Tres Jolie Kit Club items contain an affiliate link where I earn a small commission with no extra cost to you!):

*Tim Holtz Distress Ink “Dried Marigold;” *P13 “The Four Seasons: Spring” Stamp Set; *Memento Dew Drop “Angel Pink;” CornerScrapsStudio “Folio” Digital Cut File; StazOn “Royal Purple;” We R Memory Keepers: Foam Mat, Craft Knife, Crop-A-Dile, Crop-A-Dile II, Tab Punch; *spray bottle (with water); bone folder; butterfly eyelets (1/8”); Silhouette Cameo 3; Nicapa 12×12 Cutting Mat; Sizzix Big Shot Plus; EK Tools Score Board; awl; needle; blending brushes; 91% isopropyl alcohol; rainbow variegated embroidery floss (J&P Coats); Art Glitter Glue; 1/8”, 1/4”, & 1” double sided tape; Aleene’s Tacky Glue; JudiKins Diamond Glaze; Fray-No-More; doubled-sided adhesive foam strips