Hey, y’all! Today I have a couple of quick autumn-themed cards for you using the October Cards, Tags, & More Kit from Tres Jolie Kit Club. I added some of the foil from this month’s Mixed Media kit to a piece of patterned paper, used the positive and negative cuts from a single die from my stash to create the backgrounds, cut some leaves, added a few details, and put them together.
Check out my quick video to see how I put these cards together!
Since these two cards are rather straightforward – and I used the same background die-cut – I’m just going to talk about them side-by-side here.
 |
 |
Both of the cards are 4”x5-1/2”, to fit the A2 die-cut background. The first thing I did was grab up the glue pen and the pieces of the foil transfer sheets (from this month’s Mixed Media Kit) that I had leftover from my Mixed Media Bat and cover a slightly-larger-than A2 piece of the patterned paper from this month’s kit. I used a piece of the patterned paper because I wasn’t sure how much I’d be able to cover with the foil and this way anything uncovered would still match the rest of the card fronts.
I hadn’t originally thought about using the negative cut from the die-cut, but after I saw just how much was left, I decided it would make a fabulous card front too! So I pieced everything back into the die and added a rectangle of adhesive sheet so I could place everything down easier.
For the “Hello” card, I used another piece from the patterned paper from the kit behind the foil-covered leaves die-cut, and on the “Thinking of You” card I used a metallic silver-tan-ish piece of cardstock from my scraps pile – both cut to 3-7/8”x5-3/8”.
 |
 |
I grabbed up my partial pieces of cut patterned paper and a sheet of some gel printed paper I had with a lovely golden paint on it (that I also added a few areas of foil transfer to) and headed over to mass produce as many leaf die-cuts as I could using Tim Holtz’s “Skeleton Leaves,” BoBunny’s “Lovely Leaf,” and a couple of unbranded leaf dies from my stash.
I cut out more leaves than I would need for these two cards, but now I have some already made! Anyhow, I used the gel print leaves for my “Thinking of You” card front, just layering them up in a semi-fanned-out cluster. I glued them down in place, then I added a few of the pumpkins from the fussy cut sheets found in the kit then popped up on some foam squares. Before I added the pumpkins I wanted to give them a little extra color so I added a bit of “Crooked Broomstick” Distress Crayon.
For the “Hello” card front I just used two of the largest cuts from the “Skeleton Leaves” set, layering them with a bit of an offset, and glued them in place. Then, mostly since I had recently been thinking about buttons, I grabbed up my We R Memory Keepers Button Press and the smallest button-making pieces and made the button for the front of the card using a piece from one of the cut-apart sheets.
 |
 |
The only thing left is the sentiments! Both sentiments came from the BoBunny “Sentiments With Love” stamp set and were stamped using a few layers of inks and embossing powder. “Thinking of You” is stamped on a piece of cardstock that matches the cardstock behind the leaf background using clear embossing powder, “Fossilized Amber” Ink and Oxide, and some “Flickering Candle” Distress Crayon. “Hello” is stamped on a piece of green cardstock using “Rustic Wilderness” Ink, Oxide, and Embossing Glaze.
After both card fronts were finished, I just added them to the card bases I had prepared. I used green cardstock for the “Hello” card, and some silver, glitter cardstock (both from my scraps pile!) for “Thinking of You.”
And with that, the cards were done! Once all of the pieces were die-cut that I wanted to use, putting the cards together took no time at all!
Thank you for joining me here in my corner! I hope these two quick cards inspired you and gave you some ideas of what you can make using this month’s Cards, Tags, & More Kit – and a little from the Mixed Media Kit.
Stay Crafty, Friends
Did you get a kit? Share what you made in our Facebook Group!
Thank you for joining us here at Tres Jolie Kits!
Tres Jolie can also be found at:
In addition to the October 2022 Cards, Tags, & More Kit and the foil from the Mixed Media Kit (*from previous Tres Jolie Kits), I used:
Distress Ink “Fossilized Amber” , Distress Ink “Rustic Wilderness” , Distress Oxide “Rustic Wilderness” , Distress Oxide “Fossilized Amber” , Distress Mica Stain “Crooked Broomstick” , Distress Mica Stain “Flickering Candle” , Distress Crayon “Crooked Broomstick” , Distress Crayon “Flickering Candle” , Tim Holtz “Skeleton Leaves” Thinlits , *BoBunny “Sentiments With Love” Stamp Set , BoBunny “Lovely Leaf” Dies , Momenta “Leaves & Vines” Mat Die , Hampton Art Clear Embossing Powder , Distress Embossing Glaze “Rustic Wilderness” , Spellbinders Tool ‘n One , Tim Holtz Stamp Platform , Sizzix Big Shot Plus , cardstock from my scrap pile , unbranded small oak and maple leaf dies , Fabri-Tac , Art Glitter Glue , foam squares , *Prima Water Brush , *spray bottle
C.J.'s Corner Scraps 