Tres Jolie Kit Club–Tag Flip!-June 2022 Cards, Tags, & More Kit

Hey, y’all! I have my last project using this month’s Cards, Tags, & More Kit from Tres Jolie Kit Club for you today, a little, zipper-closed, tag flip book that is just perfect for jotting down notes to yourself – things you want to remember – ephemera you may want to tuck away, or just a little place to doodle in. This project is completely customizable – you can use whatever materials and colors you want. And the best part? It doesn’t even have to make sense to anybody else! It’s all you!

tagFlip-jun22ctm-04

I had quite a pile of tags already die-cut from my previous two Cards Kit projects this month that my original thought was to make a tag flip booklet that went on a book ring, but then I started laying out all my tags, and realized that what I really wanted to do was make something a little more interactive – and this was the result! Check out the video to see how I put it all together.


Video:


tagFlip-jun22ctm-01 tagFlip-jun22ctm-02

I still had a lot of die cuts left from my Memory Dex Cards, so I added them to this project. Both the butterfly on the front cover and the flower on the back were cut out of the leftover handmade paper I had from my Junk Journal project that was posted on the 9th. I added some of the Eyelet Outlet Jewels to my butterfly body and popped on a few of the Prima flowers. You can see the random, wayward stitching that I used for my zipper, who knows what kind of stitching I would have used if I had thought about a zipper closure before putting everything together!

tagFlip-jun22ctm-03

Want to add a bit of personalization to your cover material? For me, a paint pen was the way to go! A regular pen, or even a gel pen, wouldn’t work so well on this rough burlap, a marker would probably work some, but I think a paint pen was best because I can make dots just by holding the nib down and letting the paint pool.

tagFlip-jun22ctm-07 tagFlip-jun22ctm-05

I just grabbed up some washi tape I’ve had for years with quotes on it and ran it across all the back tags, then ran some silver dot washi across the top of the left side of the booklet, and the bottom of the right side to fill in a little more and give some shine. I added brads to my tag holes – mostly to use them up – and added random stitching on my KaiserCraft white cardstock tabs to give them some color.

tagFlip-jun22ctm-12

I had these little metal flips in my stash and decided to add them in with some silver brads to hold little stacks of the rest of the tags that weren’t sewn in as part of the booklet. You can also see that for some more personalization, I colored in the outer edge of my tab with a gel pen. No rhyme or reason, just grabbing up a pen that I felt like using at the moment! Having an assortment of pens comes in handy because it can also be a way to express the mood you’re feeling when adding to your booklet.

tagFlip-jun22ctm-11 tagFlip-jun22ctm-06

When it came time to put my third Cards Kit project of the month together, I found myself staring at tags and die-cuts I had already made on leftover handmade paper, and the beginning of an idea to do something that opened in more than one direction. I just started laying tags out, trying to build the “direction” of everything in my mind as I went, so I didn’t just make a booklet that had “pages” that turned from right-to-left. I cut off bits of the burlap and canvas to make flip-up, flip-downs, and flip-outs. When I ran my washi across, I wrapped it around the tags that were “pages” (not the ones made to flip up or down). I didn’t want to stamp on all of my tags, and I didn’t want to cover the whole surface – there needed to be someplace to write – so I left some of the tags bare and added in the rest of the tags I had cut.

tagFlip-jun22ctm-10 tagFlip-jun22ctm-09

With some of the smaller die cuts – either solid shapes or outlines/frames – that were from the KaiserCraft white cardstock, I added some of the silver polka-dot washi tape and some stitching around the edges. If it was just an outline, I folded the tape in half so it would stick to itself, and used it as the center of the die-cut, which was also folded in half.

tagFlip-jun22ctm-08

As you can see, there are loads of places to write little notes or tuck in bits of ephemera you want to keep!

Thank you for joining me here in my little corner, I hope you enjoyed this little tag flip booklet and it gave you some ideas for making your own personalized little booklet.

Stay Crafty, Friends


Corner Scraps can also be found at:

Corner Scraps Studio Etsy

Corner Scraps Instagram

Corner Scraps Facebook

Corner Scraps YouTube

Corner Scraps Pinterest

Tres Jolie can also be found at:

Tres Jolie Facebook

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


Tres Jolie Insta Square Frame

In addition to the items from this month’s Cards, Tags, & More Kit (*from previous Tres Jolie Kits), I used:

Some items (non-Tres Jolie) contain an affiliate link where I earn a small commission at no extra cost to you!

*49 & Market “Cream” Burlap Ribbon; Canvas Corp Canvas Fringe; Hazel & Ruby Fat Roll “Quote Me;” Scotch Silver Polka Dot Washi Tape; Aleene’s Tacky Glue; JudiKins Diamond Glaze; paperclips; brads; metal tabs; handmade paper; thread

Tres Jolie Kit Club–Memory Dex Cards!–June 2022 Cards, Tags, & More Kit

Hey, y’all!

We’re halfway through June, and this week I have some Memory Dex cards for you that I created using items from this month’s Cards, Tags, & More Kit from Tres Jolie Kit Club and items from my stash – quite a few from previous Tres Jolie Kits! Check out my video to see what I did for each of the cards I made – then grab up your supplies and create your own Memory Dex card(s).

memoryDex-jun22ctm-04

I had bought the Heidi Swapp Memory Dex Spinner quite some time ago, and had originally thought of grabbing up some spray paint and changing the color – I might still do that – but I grabbed it up for this project so I’d have someplace to put my cards when they were done, and to make sure I didn’t make them too tall to clear the bottom! Depending on what kind of “–dex” system you have – be it a spinner, a box, something vintage, or something custom made – you can get very creative on how your Memory Dex cards are made! If, for example, you have the Memory Dex Box, you don’t have to worry about height, only width! (After this project was completed I happened to find a vintage Rolodex® system that would allow cards to fit in without any height or width restrictions!! *happy dance*)


Video:


A closer look at the cards I made:

memoryDex-jun22ctm-06 memoryDex-jun22ctm-09

My Concord & 9th “Lucky” Die cuts the three layers – thick line and outline from one die, thin line from another – so I made two lucky cards. The thick line and outline were cut from a half sheet of the white cardstock that I hand-inked up using a variety of Distress Oxides from my stash. The white pieces were from another partial sheet of the KaiserCraft cardstock, and on some of those, like the butterfly, I added some Distress Oxide to give a pop of color. I didn’t have any particular plans when I set out to make my cards, I just cut a lot of pieces and started layering; generally ending with a few of the Eyelet Outlet jewels and/or some of the small Prima butterflies.

memoryDex-jun22ctm-07

I made my “Imagine” card a shaker card by cutting a circle out of the pink striped paper from this month’s kit, adding a sheet of craft foam with a circle cut out as a spacer, and filling it with some of the beads and sequins from the Buttons Galore cube from Septembers (2021) Cards Kit. I just used some plastic from an old package of die cuts – I often save the harder/stiffer plastic packaging for just this reason! – and stitched it in place with some metallic silver thread. My “Imagine” as a layer of the “Gamboge” Stencil Butter on it from the Mixed Media Kit and, while it was still wet, I sprinkled some Lindy’s Magical Powder on and spritzed it with a little water.

memoryDex-jun22ctm-05 memoryDex-jun22ctm-12

These two cards were really a couple of “let’s see how these parts work together” cards! The “grateful” card has a slot cut from the top (the label die from Tim Holtz’s “Stitched Slots”) that I just tucked a couple of large die cuts into after giving them a little color. The flower is just inked with some Distress Oxide, and the leaves have some Lindy’s Magical’s sprinkled on them. I cut the card from my inked KaiserCraft sheet, backed it with some of my leftover handmade paper, and added some stamping, jewels, & butterflies. The “grateful” had originally been stamped, but it didn’t show up very well, so I traced over it with a gel pen.

I wasn’t sure when I cut it if I would use the Bird Branch die, but I added some Magical’s, let it dry, and thought about what I’d do with it while working on other cards. Eventually, it came time to play with it, and I found that I liked how it looked with the oval frame, but the frame needed some color too! So on went some Magical and PearlEx powders. The card is another cut from my inked sheet and has some of the “Grecian Gold” Modeling paste (from the Mixed Media Kit this month!) dabbed on with my finger for a little shine. Then, to add a bit from this month’s Card’s Kit, I popped on a tab punched from one of the papers, added some orange jewels, and a Tim Holtz “Small Talk” sticker from my stash.

memoryDex-jun22ctm-11 memoryDex-jun22ctm-15

These two Memory Dex cards were made from a piece of scrap cardstock that I practiced a couple of mixed media ideas on. I have some texture paste, mica powder, and Magical powder on the base tag/Memory Dex, then I stamped the butterfly from the stamp in this month’s kit, I cut a tag-shaped frame out from my inked paper, layered a couple of more tags vertically, popped in a flower, added my jewels and phrase.

While I was doing all of my cutting, I decided to make a round Memory Dex card, so I used one of my circle dies to cut out the inked stenciling I had done (stencil from this month’s Mixed Media kit!). I stamped on the butterfly and phrase, attached a rectangle bottom, and ran it through my sewing machine a few times. The final touches were some Distress Oxide around the edges and the jewels.

memoryDex-jun22ctm-10

When I first started this card I had thought of just attaching the pocket to another card, but as I was putting it together, I decided that I much preferred the pocket as the card! The top slot is backed by some pink cardstock from my stash, and the rest of the slots are back with white cardstock – what had been the original Memory Dex shaped card. The Tim Holtz “Stitched Slots” die is the perfect size for the spinner, I just punched the slots at the bottom and popped it right on. I used some of the smaller tags, cut with the tag dies from this month’s kit and cut from this month’s papers, to stick on some “Small Talk” phrases and slipped them into the slots. They don’t weigh a lot, so the friction between the papers is enough to hold them in place when they are upside down on the spinner. I then just added some of my die-cut hearts, outlined them with a yellow gel pen, added the label, and another “Small Talk” sticker.

memoryDex-jun22ctm-13 memoryDex-jun22ctm-14

The card with the bicycle stamped on it was probably the fastest to put together because all I did is layer up the different circles I had already cut out! I used the pink striped circle to fill the circle in the card base, then put the layers through my Sizzix using the dot embossing folder that had come with the machine, added that half-circle with some Lindy’s Magical’s stenciled on, and then all of the other plain circles. To add some contrast to all those circles, I popped on one of the smallest tags, then stamped on the bicycle and added the butterfly and phrase.

My “Spring” card was my first of the batch! I trimmed an inch off the width of a 3”x5” index card so it would fit on the spinner, used the stamp from this month to just get the flowers to peek out from behind the tag, and splattered it with some “Lemon” Glossy Spray. The tag is from some pink cardstock I had that was already adhered to an adhesive sheet. I used the thin scraps from my Folio at the beginning of the month, and just randomly layered them on the adhesive. I then cut the tag using the next to largest die in the set, peeled the protective paper the rest of the way off, and brushed on some Finnabair Mica Powder. Then I just finished up the details with some flowers, jewels, a butterfly, and the small tag.

memoryDex-jun22ctm-08

Lastly, my “document” card. The die-cut word was too long to fit on the Memory Dex Spinner, so I cut it where it could be hyphenated, clipped off an end of the cross-mark on the “t” to use as the hyphen, and layered up a couple tags and a tab on the base card. I used some of the “Grecian Gold” Modeling paste on “document,” the stars and diamonds are from my Concord & 9th Lucky Die Set, there’s a little stamping, and a few jewels, and this card was done!

memoryDex-jun22ctm-01 memoryDex-jun22ctm-02 memoryDex-jun22ctm-03

Thank you for joining me here in my corner! I hope you enjoyed seeing these cards and they inspired you to make your own Memory Dex card or two!

Stay Crafty, Friends


Corner Scraps can also be found at:

Corner Scraps Studio Etsy

Corner Scraps Instagram

Corner Scraps Facebook

Corner Scraps YouTube

Corner Scraps Pinterest

Tres Jolie can also be found at:

Tres Jolie Facebook

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


Tres Jolie Insta Square Frame

In addition to this month’s Cards, Tags, & More Kit (*from previous Tres Jolie Kits), I used:

Some items (non-Tres Jolie) contain an affiliate link where I earn a commission at no extra cost to you!

Lindy’s Gang: Magical Shaker: *Guten Tag Teal, *Oktoberfest Orange, & Yodeling Yellow, & *Magical “Bougainvillea Fuchsia;” *Jacquard PearlEx “Misty Lavender;” Ranger/Dina Wakley: *Glossy Spray “Lemon;” Prima/Finnabair: *“Vintage Roses” & *“Pearls & Crystals” Mica Sets; Darice: *“Mosaic Butterfly” Embossing Folder; *Embossing Essentials “Oblong Frames,” & *Embossing Essentials “Oblong Doily Frames;” Dress My Craft: *“Classic Doily” & *“Crochet Doily” Dies; Buttons Galore: *“28 Lilac Lane;” Ranger Opaque Matte Texture Paste; StazOn “Olive Green” StazOn “Royal Purple” Ranger/Tim Holtz: Distress Oxide Spray “Dried Marigold” Distress Oxide “Speckled Egg” Distress Oxide “Squeezed Lemonade” Distress Oxide “Kitsch Flamingo” Distress Oxide “Villainous Potion” Distress Ink “Villainous Potion” Distress Ink “Speckled Egg” Ranger/Wendy Vecchi: Archival Ink “Watering Can” idea-ology/Tim Holtz “Small Talk” Concord & 9th “Lucky” Die Set, Heidi Swapp: “Imagine” Die, “Document” Die, Memory Dex Dies (Oval) Memory Dex Punch & Memory Dex Spinner (Black) Spellbinders Tool ‘n One & Standard Circle Nestabilities; We R Memory Keepers 3-Way Corner Punch & Tab Punch; Sizzix: Big Shot Plus (Big Shot Plus Starter Kit) Sizzix/Tim Holtz: “Tattered Florals” & “Bird Branch” Bigz Dies, & “Stitched Slots” Thinlits; Sakura Gelly Roll Moonlight & Gelly Roll Souffle Pens; Scrapbook Adhesives 12×12 Adhesive Sheet; Aleene’s Tacky Glue; Krylon Workable Fixatif; JudiKins Diamond Glaze & MicroGlaze; Art Glitter Glue; adhesive foam squares; Tonic/Tim Holtz Stamp Platform; We R Memory Keepers 3-way Corner Punch; Unbranded Memory Dex/Rolodex Dies; blending brushes; 1/4” & 1/8” double sided tape, craft foam; *spray bottle; 3×5 index cards

Tres Jolie Kit Club–Tag Folio!-June 2022 Cards, Tags, & More Kit

Hey, y’all!

Welcome to June! Did you get a chance to check out the kit reveals yesterday? This month’s kits are just fab!

For my first June project, I made a little tag-filled folio using this month’s Cards, Tags, & More Kit from Tres Jolie Kit Club, a few extras from my stash (ink, thread, & eyelets), and a cut file I created (I have the measurements I used listed below!).

So, grab your supplies and make yourself a little tag-folio!

tagFolio-Jun2022-01

I have a two-part tutorial (well, I talked a lot at any rate!) for this folio, part 1 is the tag cutting and base construction, and part 2 is the decorating and final touches. I go over cutting your folio base by hand if you aren’t using an electronic cutting machine, and my assembly process when putting everything together.


Part 1: Tag Cutting & Base Construction

Part 2: Decorating & Final Touches


tagFolio-Jun2022-02

tagFolio-Jun2022-03

First, a quick look at all the tags I made for my folio. I die cut a full sheet of the white cardstock, and six sheets of the patterned paper into a variety of tags – some to use this week, some to have ready for the rest of my projects this month. I used the white tags as my base, tore the patterned paper tags at about a 1/3rd – 2/3rd split, and mixed and matched the sides. I have had those butterfly eyelets for years now, and I thought it was about time to use some up, so I popped them into the holes on the tags.

I used a full sheet of the white cardstock to make my base. I have vertical score lines at 3-3/4”, 4”, 4-1/4”, 7-3/4”, 8”, and 8-1/4” and a horizontal score line 6” from the top. I didn’t cut the bottom 1/2” with the barcode and “KaiserCraft” off my sheet, so I have a score line at 12” also. I actually used that little bit during the construction to “protect” the bottom edges of my pockets during construction! Check out the image below to see all the measurements, plus I have some slot placement templates.

tagFolio-baseDimension


Slot Measurements:

tagFolio-slotDimension


Slot positioning templates are available as a PDF from my personal (non-Tres Jolie!!) DropBox for personal use only, please (attribution appreciated, but not required). When printed, the panels should be 4”x6” for an easy lineup with your edges and score lines – although printers & printer settings may vary! (Note: when testing, I made sure to print “actual size” from the printer dialog box and not “to fit” because Adobe and/or my printer wanted to make the 8-1/2”x11” image smaller to fit with margins on an 8-1/2”x11” sheet of paper!)

base-slot-templates-printable-pg1

base-slot-templates-printable-pg2


I made a pocket for each slot of my folio, but I have also added the measurements for alternate pockets so you have a variety to choose from:

tagFolio-sixPocketDimension

*Measurements are to the center of the slot*

tagFolio-pocketOptions



Part 1 of my videos covers the construction of the folio base, so I’ll just add some refresher details here on the blog. I lined my pockets up carefully, and got them in place – they are sized to be able to just be folded in half to fit – more or less – there may be a couple that requires some tweaking by folding slightly more than half. I used a combination of double-sided tape and glue to hold everything together – because I like adhesion! You could easily put it all together with just one or the other!!

Before I folded the folio over to close it up, I added a length of the seam binding from the kit across the middle, cut a slot in the hinge between the middle and last panel so I could feed the seam binding through and I would be able to tie it together when that last panel was folded in. For the end of the seam binding that came out of the edge of the folio, I added a couple of tiny staples to help keep it in place through all the tying.

I wanted to reinforce the hinges some, but I didn’t want to add a lot of bulk, so I used the cover sheet from the paper pack to reinforce the hinges on the [folded over] inside of the folio and to reinforce and add some more color to the hinges between the panels on the [visible] inside of the folio. After I had the folio folded in half and glued together, I added the last bit of seam binding to the outside of my hinges to help reinforce all the bending of the paper and cardstock.

tagFolio-Jun2022-10

tagFolio-Jun2022-06


With my base finally put together, it was time to start getting the finishing touches done, so I added the papers I had chosen for the outside of the folio. Since I was going to be adding stitching around my edge, I didn’t worry about making sure my adhesive went all the way to the edge, if you aren’t going to add stitching, you will want to make sure you have a secure seal so your cover paper doesn’t pull up!

Even though I wasn’t going to be doing my stitching yet, I wanted to get my holes made so I would know where my stitching would be, so I made a template that would help me make sure everything was spaced evenly and lined up where I wanted them. You can grab that template as a PDF from my personal DropBox if you would like to use it for your personal folio. I have it made to print on two sheets, with a little overlap in the middle to help line the holes up. Printers being what they are, you may or may not get lucky enough to have it print “perfect!” I didn’t get that lucky, but my second page was only a hair “off” so it wasn’t a big problem. (Note: Just like with the slot templates, make sure you print “actual size” and not “to fit”!)

After my holes were all poked through, I cut some 3/16” stripes of white cardstock and a 1/8” strip to use as a spacer so I could even out how my hinge papers looked. I used the 1/8” strip to add the space between the edges of the holes and the edge of the 3/16” strip. I also added 3/16” strips to the outer [vertical] edges so my slot reinforcements would sit evenly (I also have a layer of cardstock under slot reinforcements – so my tag slots are super reinforced now!). I inked up my slot covers and glued them in place.

tagFolio-reinforceDimension

tagFolio-Jun2022-09

tagFolio-Jun2022-12

stitchGuide

Now it was finally time to start thinking about how I wanted to decorate the folio, and which finishing touches I wanted to add. I used my “Royal Purple” StazOn to stamp my butterfly images and to dye my seam binding tie closure. For my main image/cluster, I go over getting permanent ink to bleed out and create the shadow effect in the second video. A helpful “fix” for images that don’t stamp clearly! (Personally, if I were to do this project again, I would add my stamping to the cover paper before adding it to the folio. It was all the pocket layers that caused the stamping issues because it was no longer flat!) Anyhow, even if something goes “wrong,” there is always a “fix.” In this case, I used some 91% isopropyl (rubbing) alcohol to cause my StazOn to bleed. I added my inks to the cardstock, then stamped the image on and fussy cut it out. The flowers and leaves are glued flat to the surface, offset just a touch to give a shadow effect, and the butterfly is popped up on some foam. The rest of the images I just stamped and left however they came out. (I did use a strip of cardstock to protect my seam binding covered hinges when I wanted to stamp across them.) I popped on some of the orange pearls and thought about what I wanted to add to the panel that folds in.

tagFolio-Jun2022-04 tagFolio-Jun2022-11

On that third panel that folds in, I didn’t want to just leave it blank, so I added a couple of the tags I had cut out. I glued the middle-sized tag on white cardstock near the bottom horizontally and added a tag in the next size up (second largest) as a flap with a simple tab added on. The “bloom” was stamped using the P13 stamp set that had been in February’s Cards, Tags, & More Kit.

tagFolio-Jun2022-07

tagFolio-Jun2022-08

Finally, I decided it was time to add my stitching! I just have a simple blanket stitch around the outside of the folio and some straight stitching along the hinges. I added some extra stitching to wrap up the corners of the folio, and added the last little bits to the decoration – the Prima flowers under the butterfly wings, and the green pearls along the bottom of the tag flap. With all that done, I added my tags to their slots and closed it all up!

tagFolio-Jun2022-05

Thank you for joining me here in my corner, I hope you enjoyed this folio project and have a chance to check out the videos that accompany it! Don’t forget to check out my Etsy shop to get the discounted cut file!

Stay Crafty, Friends


Corner Scraps can also be found at:

Corner Scraps Studio Etsy

Corner Scraps Instagram

Corner Scraps Facebook

Corner Scraps YouTube

Corner Scraps Pinterest

Tres Jolie can also be found at:

Tres Jolie Facebook

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


Tres Jolie Insta Square Frame

In addition to this month’s Cards, Tags, & More Kit (*from previous Tres Jolie Kits), I used (some non-Tres Jolie Kit Club items contain an affiliate link where I earn a small commission with no extra cost to you!):

*Tim Holtz Distress Ink “Dried Marigold;” *P13 “The Four Seasons: Spring” Stamp Set; *Memento Dew Drop “Angel Pink;” CornerScrapsStudio “Folio” Digital Cut File; StazOn “Royal Purple;” We R Memory Keepers: Foam Mat, Craft Knife, Crop-A-Dile, Crop-A-Dile II, Tab Punch; *spray bottle (with water); bone folder; butterfly eyelets (1/8”); Silhouette Cameo 3; Nicapa 12×12 Cutting Mat; Sizzix Big Shot Plus; EK Tools Score Board; awl; needle; blending brushes; 91% isopropyl alcohol; rainbow variegated embroidery floss (J&P Coats); Art Glitter Glue; 1/8”, 1/4”, & 1” double sided tape; Aleene’s Tacky Glue; JudiKins Diamond Glaze; Fray-No-More; doubled-sided adhesive foam strips