C.J.&#039;s Corner Scraps

In addition to this month’s Scrapbooking Kit and Mixed Media Kit, I used:

StazOn “Jet Black,” Dear Lizzy Date Stamp, Tim Holtz Tiny Attacher, Finnabair Clear Gesso, Ranger Clear Extra Thick Embossing Powder, Ranger Clear Emboss-It Ink Refill Bottle, double-sided adhesive foam, Krylon Workable Fixatif, Art Glitter Glue, Gorilla Glue Gun & Glue Sticks

Tres Jolie Kit Club–Mini Pocket Album–May 2023 Cards, Tags, & More Kit

Image | May 4, 2023May 9, 2023 | Corner Scraps

Hey, y’all! For my first May project, I have a mini pocket album inspired by the “Tea Book Ephemera Organiser’s” from Bohemian Crafting! When I saw the original video, I knew I had to make my own little book! Not only is this an adorable little book/album, but it is also easy to put together!

Make sure to check out my video and see it all come together!

For my cover, I used a piece of poster board from when my kids were in school. It’s flexible, yet sturdy – I’m not very good and guessing the weight of paper, but I do know it isn’t as thick as the 130# cover stock I like to use as card bases!

I cut out a 10-inch by 8-1/4-inch rectangle from the poster board, then on the 10-inch side, I scored at 4-1/2-inches, rotated the cover 180 degrees, and scored at 4-1/2-inches again. You could also score at 4-1/2 inches and 5-1/2-inches if you didn’t want to rotate your cover piece, I only rotated mine to make sure I had the front and back flaps of the cover as close to equal as I could get! This way, if my original cut wasn’t “exactly” 10 inches, my front and back cover would still be 4-1/2 inches, and any “excess” would just find its way to the spine!

I picked out the papers I wanted to use for my cover and cut four 4-1/2-inch by 3-inch rectangles out of the floral paper and two 4-1/2-inch by 2-1/4-inch rectangles out of the orange-ish paper. I added the extra 1/4-inch to the orange-ish paper to give a little bit of extra to work with to make sure I didn’t have any gaps – which is also why I glued it down before the floral paper! I didn’t glue the paper down to the spine until after I had the pages stitched in, because I knew I wanted to cover all the thread.

After the outer papers were glued to the front and back cover, I poked some stitch holes and added some simple stitches using 6-strand embroidery floss (I used all 6 strands!). Then I picked out the papers for the inside of the covers, cut the background papers just long enough to have the edge hidden by the 3-inch pockets, glued them to the cover, and added the pockets.

I have three different pocket page sizes – 3, 3-1/2, and 4 inches – made from 6”x6”, 7”x7”, and 8”x8” squares of paper. And, regardless of the finished size, they were all made the same – folded in half, then half again! This gives an opening at one long edge of the paper (the top of my pockets) and the two short, outer edges. To seal the outer edges, I didn’t glue them closed, I used leftover strips of the BoBunny paper, solid cardstock, and BoBunny stickers to hold them closed. As an optional step, you can also use a circle punch – or just scissors – to add thumb holes to the top edge of the pockets! I inked the edges of my pages, and since it is chalk ink, I have my pockets a spray of Workable Fixatif to help the chalky finish stay in place.

After I had the edges sealed, I added a strip of green cardstock to the inside spine and finally stitched my pages to the spine through the holes I had pre-poked using a template I had made to help me keep my pages centered and evenly spaced. Each page has two holes for stitching through – 1/4” from the top and bottom of the pocket – and I just used simple straight stitching to hold them in.

Once the stitching was done, I finally added the papers I had picked for the spine to cover my thread.

After the pages were sealed, I used more of my scrap pieces –the solid cutoffs stamped with one of Tim Holtz’s newest stamps – and some of the stickers to add some simple decoration to the pages and cover – sometimes adding another wrap around the edge, sometimes creating tabs for the edges. On the cover I also used one of the Tres Jolie Chipboard pieces, coated with clear gesso from my stash, the Faded Jeans Chalk Ink from the kit, and a little clear embossing powder, and with some of the KaiserCraft pearls on the stem.

Thank you for joining me here today, I hope you enjoyed this mini pocket page album and it gave you some ideas of what you can make using this month’s Cards, Tags, & More Kit!

Stay Crafty, Friends

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Tres Jolie can also be found at:

In addition to this month’s Cards, Tags, & More Kit, I used:

Finnabair Clear Gesso, Tim Holtz “Floral Trims” Stamps, Fiskars 1.5” Circle Punch, We R Memory Keepers Tab Punch, We R Memory Keepers Corner Chomper, Hampton Art Clear Embossing Powder, UHU Stic, Art Glitter Glue, JudiKins Diamond Glaze, double-sided tape, Krylon Workable Fixatif, Liquitex Matte Varnish, 3M Durapore Tape

Reveal Day! – Tres Jolie Kit Club–May 2023 Kits!

Image | May 1, 2023April 30, 2023 | Corner Scraps

Hey, y’all! Is it May already? WOW! But at least that means it’s time for new Tres Jolie Kits! YAY! As always, these kits are FAB-U-LOUS and perfect for your May creations!

Summer is drawing nearer, soon the season of swimming, bar-b-que’s, and campfires will be in full swing! Make sure you have your Tres Jolie Kit Club kits so you can create your summer memory crafts and preserve your summer memories! Be sure to get your kits before they’re gone! Or, better yet, subscribe to Tres Jolie Kit Club so you will never miss a kit!

Be sure you follow us on all social media platforms (Tres Jolie Kit Club links at the end of the post; Corner Scraps links to the right) and have joined the Tres Jolie Kit Club Facebook Café so you won’t miss a single announcement or project created with these kits.

The May 2023 Scrapbooking Kit is filled with the wonderful 12”x12” Collection Pack, Laser Cut Elements, and Tag Set from 49 & Market’s Everywhere line! You will also find 49 & Market coordinating flower packs, and fabulous Tres Jolie Chipboard geotags and compass pieces! As always, these papers will be amazing for all your upcoming projects, whether they are beautiful layouts, junk journals, cards, or anything in between! You will find a lovely assortment of patterned papers and perfectly coordinated embellishments.

In the Mixed Media Kit, you will find beautiful PearlEx Pigment Powders in Micropearl, Aqua-Blue, and Sky Blue! These pigment powders will add beautiful color to the Izink Flakey Texture Paste by Seth Apter if you choose or can be used to add some accent color to the Dress My Craft Transfer Me 3D White Damask’s. Decorate the coaster blanks from Dress My Craft using the Tim Holtz Mini Stencils, and add more or a different, texture with some art stones! No matter what you decide to do, the Mixed Media Kit is sure to give you hours of happy craft time!

In the Cards, Tags, & More Kit, you will find a 6”x8” patterned paper pad and cardstock stickers from BoBunny’s Garden Grove collection that you can use to create unique cards using the solid cardstock sheets from the kit, decorate the tags found in the kit, create some ATCs, or whatever you can think of! Who doesn’t like creating a variety of projects from one kit?

These kits are for the beginner to the advanced; from clean and simple – to mixed media maven. No matter your style, there is something for everyone. We know you are going to love it!

And now (drumroll, please) the May 2023 Kits from Tres Jolie:

Scrapbooking Kit

Mixed Media Kit

Cards, Tags, & More Kit

Don’t forget to stop by the Tres Jolie YouTube channel and see our video reveal for all our kits.

Love them, right?!?! You can still get one of your own (some kits are in very limited quantities). Become a subscriber and you will never miss out on our gorgeous, coordinated kits. Just visit Tres Jolie Subscribe.

The designers at Tres Jolie have created some amazing layouts and projects with this kit. I have had a busy April, but I have one sneak peek for you!

Please stop by the other designer’s blog to check out their sneak peeks:

We have a new mood board challenge for the month, with the following rules and guidelines:

Place your entries in the April 2023 challenge folder on the Tres Jolie Kit Club Café Facebook page. This challenge ends on April 30th, 2023 at 11:59 pm CDT. All entries must be in this folder to be eligible for the prize (to have everyone eligible to win, we limit the same winner to once every 3 months).

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Tres Jolie can also be found at:

All the designers will be revealing their projects on the Tres Jolie Blog all month. Be sure you join us for tons of inspiration, including video and photo tutorials. Also, make sure you check out the newest Tres Jolie Chipboard designs that were just added to the store.

Tres Jolie Kit Club–Easel Cards!–April 2023 Cards, Tags, & More Kit

Image | April 6, 2023April 5, 2023 | Corner Scraps

Hey, y’all! Have you played with your April Kits yet? Are they fabulous or what!?!? I absolutely love the “Happiness” line from LemonCraft found in this month’s Cards, Tags, & More Kit – so bright and cheery – perfect for your spring projects!

To kick off my April projects, I have a couple of easel cards for you! One is a 6”x6” “Thank You” card and one is a slimline “Happy Easter” card I created using a few pieces of Tres Jolie Chipboard from my stash, in addition to the Happiness papers! I used cardstock from my stash, and on the Easter card I added a little of the “Fairy Wings” paint from this month’s Mixed Media Kit, but all of the patterned papers, flowers, and fussy-cut bits and pieces are from the kit!

Make sure you check out my video to see how I put these together!

After I picked out the cardstock I wanted to use, I got started constructing my card base. The green cardstock isn’t heavy cardstock, I’d say it’s an average weight – about 65 lbs I think – but the “Natural” cover stock is much heavier – 130 lbs! You don’t need to use 130lb cover stock, but I love how sturdy it makes cards, so I keep it on hand! Since this card lies flat and the easels stand, you could easily use “regular” cardstock or patterned paper for your layers.

To try and make sure I am explaining my measurements as clearly as possible, I have some photos of the various pieces with their measurements! (Taking a snapshot of a video frame does come in handy sometimes!!)

This first set of photos shows the measurements for the 6”x6” card and the four easels that are on it. I cut the green cardstock in half, making a 6”x12” rectangle, then folded it in half along the long edge, easy-peasy! (My card is a top fold card, but you can have your fold wherever you want!) Then I cut two 5-3/4” squares out of my cover stock and glued them inside the base for the message to be written on, and on the front to add some contrast between the base and the easels.

For the easels, I cut four 5”x2-1/2” rectangles and folded them in half – these are the easel bases – and I cut four 2-1/2” squares to use as the easel fronts.

All four of my easels have the fold at the top so they all stand up in the same direction – and to make the easel-making process a little easier to explain! With the fold at the top, you are going to want to fold the top flap of your easel in half along the diagonal – from one of the corners at the fold to one of the bottom corners. I have my easels set to face the outer edges, so I folded two from the top right to the bottom left, and two from the top left to the bottom right. (In the two photos showing the folds, I only used a scrap of the cover stock for visual purposes – so you could see easier than me trying to show green on green!)

Once your easels are folded how you want them, all that is left to do is add the 2-1/2” squares that make up the easel fronts. You don’t want to glue them all the way down, only to the bottom triangle of your folded cardstock – this is the whole easel – the part that will stand up to be shown off!

You can see in the next pictures that I made sure my easels were all facing how I wanted them before gluing them down to the card front!

With the four easels glued down, all that I had left to do was pick out which patterned papers and fussy-cut pieces I wanted to use to decorate with.

In total, I cut eight 2-1/4” squares from two different patterned papers. I used the paper with the larger print to cover the section that will be seen while the easels are standing, and I used the paper with the smaller print on the easel faces so it wouldn’t be too overpowering when I came back and added the fussy cut flowers.

For the four squares with the larger pattern, I used an acrylic square to help me make sure the pattern I wanted would be showing!

Once all of the “main” pieces were in place, it was just a matter of adding the final decorations and the sentiment.

To add a little dimension and contrast to the fussy cut pieces, I lightly inked the edges using the “Bamboo Leaves” ink from the kit, glued a few of the flowers together, then popped up the little collage pieces on some foam squares.

For my easel “stoppers,” I picked out four of the smaller, fussy-cut butterflies, backed them with some double-sided adhesive foam, cut off the excess foam, and topped them with some Diamond Glaze – in essence, I created custom “enamel dots” using the papers from the kit! Once the Diamond Glaze had dried completely, I stuck the butterflies down where I wanted the easels held.

Finally, it was time to add my sentiment! All I did is pick out the stamp I wanted to use from the set in the kit, ink it up, and stamp it to a couple of the small cut of pieces from the papers I had already used!

Then, to soften it up, I created a watered-down “puddle” of the “Bamboo Leaves” ink on my craft mat and used a water brush with the puddle of ink to lightly trace over the stamping. I fussy cut the sentiment out, added some foam to the back of the words, and then added the words to the top-right square.

Now on to the slimline Easter card! The building process for easel cards is – more or less – the same. It is really only a matter of which way you are going to have your easels facing! And, for this card, since I have my easels facing forward, I didn’t even have to make diagonal folds!

For my card base, I used the 130lb cover stock, cut it down to 8”x9-1/4”, and folded it in half along the shorter edge, to create a 4”x9-1/4” card. Then for some layering, I cut a 3-3/4”x9” rectangle from green cardstock to start building my card face.

For my three easels, I cut three 6”x2-1/4” rectangles to use as the bases and folded them in half along the long edge – making them 3”x2-1/4”. I also added a score line and folded them at 1-1/2” to create the easel. Then, for the easel faces, I cut three 3”x2-1/4” rectangles.

I have the folds (at the 3” mark) for my easel at the top, and I added glue to the bottom rectangle that was created with the second fold at the 1-1/2” mark to attach my easel faces.

To keep my three easels as centered as possible, I used a 3/4” wide strip of paper as a spacer along the edge of the green cardstock on the card base and lined my easels up along that strip. My easels are “on top of” each other – in other words, I didn’t add any horizontal space between the bottom of one easel and the top of the easel under it.

Just because the patterned paper in the kit is an 8”x8” pad, doesn’t mean it can’t fit on a card that has a 9” tall face! After all, the diagonal of a square is longer than the two sides! In this case, from one corner to the opposite corner, it is a little over 11-1/4”, and since I didn’t need very wide strips – only 5/8” – everything fit just fine on the edge of the card front.

I had very minimal paper piecing required to get the front finished – only having to piece the background of the center easel together to get the “boards” how I wanted them.

I picked out the patterned papers I wanted to use to back my Tres Jolie Easter Egg Chipboard with and to use under the easels, backed the chipboard with the paper and trimmed the excess from the edges off, and cut the three pieces that will show when the easels are standing down to size!

I didn’t want too much decoration on the chipboard, so I just used the “Bamboo Leaves” ink and some water to add a bit of color to the eggs. Once I had the ink on, I decided I wanted to add a little something extra to the “Happy Easter” easel, so I gave a light brushing of the “Fairy Wings” paint (found in this month’s Mixed Media Kit) to the sentiment and popped on a few of the green flowers from the kit.

Thank you for joining me here on the blog today! I hope you enjoyed these two easel cards and they gave you some ideas of what you can make using this month’s Cards, Tags, & More Kit!

Stay Crafty, Friends

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Tres Jolie can also be found at:

In addition to the April 2023 Cards, Tags, & More Kit (and a little of the paint from the Mixed Media Kit!), I used (from previous Tres Jolie Kits):

Tres Jolie “Easter Egg Set” Chipboard, Bazzill “Apple Crush” Cardstock, Core’dinations “Kiwi” Cardstock, Marco’s Papers “Natural” Cover Stock, Scotch ATG, Art Glitter Glue, Jacquard Gum Arabic, JudiKins Diamond Glaze, Double-sided foam, Prima Water Brush

Reveal Day!–Tres Jolie Kit Club April 2023 Kits!

Image | April 3, 2023April 2, 2023 | Corner Scraps

It’s the first of the month, and you know what that means?!?! It’s Reveal Day! And for April, you will find a wonderful assortment of papers and embellishments ready for you to get your Spring projects going full swing!

Flowers are popping, trees budding, and pollen is in the air – best to stay indoors and craft than go outside and sneeze! Make sure to get your kits before they’re gone! Or, better yet, subscribe to Tres Jolie Kit Club so you will never miss out!

The April 2023 Scrapbooking Kit is filled with the beautiful 12”x12” First Kiss papers from Paper Heaven, coordinating epoxy coated Mango stickers from 49 & Market, fabulous flowers from Little Birdie Crafts, and a beautiful piece of Tres Jolie Chipboard! As always, these papers will be amazing for all your upcoming projects, whether they are beautiful layouts, junk journals, cards, or anything in between! You will find a lovely assortment of patterned papers and perfectly coordinated embellishments.

In the Mixed Media Kit, you will find a wonderful assortment of Finnabair mediums – paints, paste, and metallic flakes – to create your own beautiful, one-of-a-kind decorations using the Craft o’Clock stencil and ScrapBerry’s wooden blanks! Get this kit, and get ready to have some fun!

In the Cards, Tags, & More Kit, you will find Happiness – and I don’t just mean by getting to play with the kit! This month’s kit has some 8”x8” papers and elements from LemonCraft’s Happiness line! Ink up one of the Kelly Creates sentiment stamps with the Bamboo Leaves Dew Drop ink from Memento and add a flower or two from the ScrapBerry flower packs found in the kit, and you have yourself some fabulous “little” projects! Cards, tags, ATCs, MemoryDex®, etc.! Who doesn’t like creating a variety of projects from one kit?

These kits are for the beginner to the advanced; from clean and simple – to mixed media maven. No matter your style, there is something for everyone. We know you are going to love it!

And now (drumroll, please) the April 2023 Kits from Tres Jolie:

Scrapbooking Kit

Mixed Media Kit

Cards, Tags, & More Kit

Don’t forget to stop by the Tres Jolie YouTube channel and see our video reveal for all our kits.

The designers at Tres Jolie have created some amazing layouts and projects with this kit. This month, in addition to a sneak peek of my first project for April using the Cards, Tags, & More Kit, I have a super-duper special sneak for you! Stay tuned to all of the Tres Jolie social media accounts because this month we will be sharing collaboration projects created using the kits and some beautiful Clear Scraps products!

Please stop by the other designer’s blog to check out their sneak peeks:

We have a new mood board challenge for the month, with the following rules and guidelines:

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Tres Jolie can also be found at:

Tres Jolie Kit Club–Mini Hoop Album!–March 2023 Kits

Image | March 23, 2023March 23, 2023 | Corner Scraps

Hey, y’all! March is drawing to a close, and soon it will be time to see the fabulous kits Tres Jolie Kit Club has put together for April! They will definitely have you blooming for spring!

For my final March project, I combined elements from all three kits and a few items from my stash to create this little hoop album. Check out my video to see how it came together – it really is rather simple.

Everything started with me looking at a 3-inch embroidery hoop I’ve had in my stash forever, and knowing I wanted to use the clock and flower chipboard piece from Stamperia in the Cards, Tags, & More Kit this month. I hadn’t originally intended to cut the clock out, it just worked out that it was a perfect size – sometimes serendipity steps in for these projects!

I didn’t want to leave the hoop its natural color, but I also didn’t want to have layers that could rub off, so I just used my hands and rubbed in the Lindy’s Moon Shadow Mist spray from the Mixed Media Kit. (And as soon as I figure out where I moved it to, I will add some cutting board wax to seal and protect the wood!)

I backed the flowers with the large Tres Jolie Chipboard piece from this month’s Scrapbooking Kit after adding some of the Lindy’s Magical Powder from this month’s Mixed Media Kit and some embossing powders from my stash. For the bottom of the base hoop, I used the solid circle from the Tres Jolie Chipboard frame, adding the same embossing powders and Lindy’s Magical Powder to it.

I turned the chipboard clock face into a shaker, adding tiny seed beads from my stash and using a length of paracord as the spacer between the acetate and chipboard. Then I slipped the larger (outer) ring from the embroidery hoop over it – face down so the top surface would be flat, and backed the shaker with a circle cut from the 49 & Market papers found in this month’s Scrapbooking Kit.

I used the packaging from the 49 & Market chipboard package to create the cover for the bottom – since it wasn’t very “pretty” with the cut-up pieces of the Tres Jolie frame showing!

I just rough traced the chipboard base, fussy cut the shape out, and to add some coverage to the random print that peeked through the Tres Jolie frame, I added a coat of gesso with some Moon Shadow Mist and gum arabic – then sprayed more Moon Shadow Mist until I got a fairly good cover!

With my base and lid together, it was just a simple matter of cutting out twelve circles to create six pages, running a length of ribbon through the two sides of each page, and stitching around the edges.

After my pages were all stitched to the ribbon, I glued the ribbon to the bottom and added a little phrase. If you don’t want to add a phrase, or you just want your ribbon to be tucked in, you could easily put your pages together before putting all of your base layers together and tucking the ribbon in along the way!

The last step was just adding some light decoration. The pages aren’t very big, so it doesn’t take a lot to add just a little more interest while still leaving space for photos!

Thank you for joining me here today on the blog! I hope you enjoyed this project and it gave you some ideas of what you can make using items from all three kits this month!

Stay Crafty, Friends

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Tres Jolie can also be found at:

Finnabair Clear Gesso, Ranger Big Emboss It, Ranger Ink Refresher, Ranger Ultra Thick Embossing Powder, Ranger Enchanted Gold Embossing Powder, Spellbinders “Standard Circle SM” Nestabilities, Liquitex Basics Matte Varnish, Recollections Clear Acetate Sheets 6”x6”, 3” embroidery hoop, LocTite Thread Locker Blue, JudiKins Diamond Glaze, Krylon Triple Thick Clear Glaze, seed beads, paracord, ribbon, UHU Stic, FabriTac, hot glue, E6000, Art Glitter Glue

Tres Jolie Kit Club–Mini Album–March 2023 Scrapbooking Kit + Mixed Media Kit

Image | March 16, 2023March 15, 2023 | Corner Scraps

Hey, y’all! How’s everyone doing? Have you been having fun playing with your Tres Jolie Kits this month? I know I have, and this week I have a mini-album for you using the beautiful 49 & Market “Tranquility” Collection, and, for good measure, I added the Stamperia rice paper from the Mixed Media Kit.

I have my video up and ready for you to check out to see how I put this all together! Make sure you swing by and check it out!

Are you joining the Tres Jolie challenge this month? All of the kits this month work wonderfully with the “Spring Flowers” twist! As you can see, the flowers were definitely a factor in my project, but I also worked the two pink doilies from the kit (and mood board!) in as well!

Be sure to place your entries in the March 2023 challenge folder on the Tres Jolie Kit Club Café Facebook page. This challenge ends on March 31st, 2023 at 11:59 pm CST. All entries must be in this folder to be eligible for the prize (to have everyone eligible to win, we limit the same winner to once every 3 months).

I don’t know if it’s really a “cheat” or not, but it is quite a bit easier than cutting thick chipboard – I used two 4”x6” (approximately 101-102mm x 152mm) canvas panels for my front and back covers! Then all I had to do is grab up some scrap chipboard to create my 2-1/2” x 4” (approximately 63-64mm x 101-102mm) spine.

I honestly couldn’t decide if I wanted to use the rice paper from the Mixed Media Kit or one of the papers from the Scrapbooking Kit for my cover – so I decided on both! – especially since rice paper makes a wonderful top layer on a collage. I cut one of the 49 & Market sheets (almost) in half, so I had two 6” (or so) by 12” pieces, lined up two of the ends – creating a 6” (or so!) by 24” strip to use as my album cover. To “cut” my rice paper, I used a water brush to outline the section I wanted to use, then just gently tore the paper apart. One of the best things about rice paper is that getting it wet is – in my opinion – the best way to cut it because it’s easier and creates a feathered edge. Of course, the other “best thing” about rice paper is that the white areas of a print become practically invisible as soon as you add your collage medium – which for this project was some Soft Matte Gel from Prima-Finnabair.

After the gel dried, I added my canvas panels and chipboard spine to the cover paper, lining the center of the spine to the seam between the two strips of patterned paper, and to make sure my cover would fold like it is supposed to, I used a 1/4” (a little over 6mm) fiberglass rod (it’s what I have, a wooden dowel rod would work just as well!) to create the necessary space between the spine edges and the canvas panels. After the glue had dried, I gave the cover a coating of matte varnish to help seal the rice paper and 49 & Market paper, let that dry, then trimmed the excess away, leaving about one inch to fold over the edges. I trimmed the corners – more than I normally would since I was going to add some pink doily corners – and a little at the top and bottom of the folds to keep the bulk out, added double-sided tape and glue, then folded everything up!

I gave the doily I was going to use for my corners a coating of matte varnish to help protect and strengthen it, cut the doily into four pieces, and wrapped all four corners of my cover with those pieces – just using more varnish as my glue.

Once everything on my cover had dried, it was finally time to get to work on the inside and add my closure. I used a couple of strips of linen hinging tape on the inside folds for more stability, coated my second doily with the matte varnish and cut it in half, and cut my end papers down to size – 3-3/4” x 5-3/4” (about 95mm x 146mm).

I added the two halves of the doily I had just cut to the edges of the endpapers that would be closest to the spine and glued the finished pieces into place after I added my closure hardware (see below). Although I didn’t add the ephemera until closer to the end of the project since I am talking about the cover already, I thought I would just try to keep things a little more “together” here on the blog and show the finished insides – plus it allows you to see how the inside doily pieces look in place!

I added a few pieces of the 49 & Market ephemera – a spot to mark the date on the front, and a little spot for journaling on the back.

After I had my end paper in place, it was time to add the spine cover/page holder. I cut a strip of paper 6-1/2” x 3-3/4” (165mm x 95mm) and added a score line every 1/2” (12-13mm) so I could create four tabs sticking up to hold my sleeve pages in place. For all of the folds that would be against the spine, I added linen hinging tape to help strengthen all of the hinges, then I glued all of my tabs together so I would have the finished piece ready and be able to trim off any excess from the left and right edges – which ended up being about 1/16” (1.5mm) from each edge – before gluing it in place.

For my closure, I used a D-ring and a short slotted head screw, leaving the smooth side of the slotted head screw showing on the outside of the covers, but covering everything on the inside!

To keep the D-ring from twisting under the paper with use, I added some 3D Matte Gel to the surface that would be again the canvas panel cover, some Loctite to the screw threads, and more Soft Matte Gel over the inside screw head and edges before finally getting the end papers in place.

I carefully used my bone folder to shape the paper around the screw and to make sure everything was smooth and wrinkle-free!

Finally, with my cover together, I was able to set it off to let it dry completely and get to work creating my pages. I decided to create sleeve pages to allow for more areas for photos, ephemera, or journaling since this is a mini, 4-page album. So first, the easy part – the inserts! I just cut four 5-1/4” x 3-11/16” (133mm x 93-94mm) rectangles. Why that size? So when they were in the pockets – which would have those tabs holding them in place – they would still have a little peeking out of the sleeves which were also cut 5-1/4” (133mm) wide and I shaved off the extra from the edges to make sure they would slide freely.

With my inserts cut, I just set them off to the side and got to work creating the sleeves. I cut four 8” x 5-1/4” (203mm x 133mm) pieces – trying to mentally keep in mind where my folds would be and which side of the pages would have the image right-side up and which side would be up-side-down! (Although, to be honest, it isn’t really that big of a deal – just more for personal preference!)

To help make sure my pockets wouldn’t be too tight – allowing photos or other flat ephemera to be added to the inserts – I gave my sleeves rounded edges with an approximately 1/16” (1.5mm) “gap.” Along the long edge of the paper I was using for the sleeve, I scored at 3-7/8” (98mm), lined that score up on one of the “bumps” of the scoreboard, and added a second score to the right of it. My scoreboard has 1/8” spacing – so moving over to a bump, gave me the 1/16” (or so) spacing I was looking for! Plus, I did add some light markings on my paper before starting the scoring process to help!

After the first edge fold was scored, I moved the paper back to the corner of the scoreboard, added a score line at 7-3/4” (197mm), moved the paper over half a tick again, and added another score to the right.

I have a thin metal ruler with smooth edges that helped me shape the edges – since making two folds that are so close together isn’t the easiest thing to do! I just wrapped the folds around the edge of the ruler, used my bone folder to help shape them, and kept the ruler in place until I had everything glued down so I wouldn’t crush the edges while burnishing to get a good seal!

And, with that, the hardest parts were done! All that was left to do is start adding photo mats and ephemera to my sleeves before sliding them onto the tabs in the spine!

I did turn some of my photo mats into 3” (76mm) circles – depending on what I wanted to show on the background – but most of the photo mats are 3-1/2” (89mm) squares.

I added a bit of decoration to the tops of my inserts, strengthening the edges and making them a little easier to hold on to.

After I had added the sleeves to the spine, I did go back through and added the dimensional flowers from the flower vine found in the kit. I took a pair of wire cutters to the vine, chopped it up, and just popped the pieces in place. I waited until the album was fully together to make sure I didn’t add too much bulk between the pages!

When the time came for me to add my sleeves, I wanted to make sure they weren’t going to be flat against the spine, which would keep them from flipping smoothly, so I cut a couple of strips of chipboard and used them as spacers on each side of the tab when adding the pages.

With the pages in place and the ribbon knotted to the D-rings, my album was done!

Thank you for joining me here today on the blog! I hope you enjoyed this mini album and it gave you some ideas of what you can make using the Scrapbooking Kit and rice paper!

Stay Crafty, Friends

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Tres Jolie can also be found at:

In addition to the Scrapbooking Kit and Mixed Media Kit from this month, I used (from previous Tres Jolie Kits):

Finnabair 3D Matte Gel, Finnabair Soft Matte Gel, Prima Water Brush, Spellbinders “Standard Circle SM” Nestabilities, We R Memory Keepers Crop-A-Dile II, double-sided tape, 4”x6” canvas panels, heavy chipboard, Liquitex Basics Matte Varnish, LineCo PVA, LineCo 1.25” Linen Hinging Tape, Art Glitter Glue, Fabri-Tac, washers, Loctite Blue Thread Locker, D-Rings, slotted head screws

Tres Jolie Kit Club–Slimline Cards!-March 2023 Cards & Mixed Media Kits

Image | March 9, 2023March 8, 2023 | Corner Scraps

Hey, y’all! How’s your March coming along, and why does March always seem like it is at least 62 days long? I swear it feels like it should be closer to the middle of the month than it is!! Anyhow…

This week I have a couple of slimline cards for you I created using the March Cards, Tags, & More Kit and the mediums and stencil from the Mixed Media Kit. These cards are relatively quick and easy – waiting for the texture paste to dry was the longest part! Make sure to check out my video to see what I did!

Pretty easy, right? With the wonderfully beautiful Stamperia papers and chipboard, these cards are quick and easy to put together! I used some cover stock for my card bases, and some craft foam as the base for my card fronts – just building the layers of paper and ephemera on top of the foam.

From the moment I saw the damask-ish print paper in the Stamperia stack, I knew I wanted to put on a card front – I just love the color and pattern! I also knew I wanted to use that little section of script print on a card, so that’s what I put together for my “Soulmate” card front! For the “Greetings” card front, I used the cut-offs from the damask-ish paper as a bottom border and a piece of the cover stock I used for the bases above it – also glued to a rectangle of craft foam.

I didn’t start out with measurements in mind; I was just working with what I had! However, since measurements can sometimes be helpful, I have added a couple of photos here with the “Soulmate” card front – the “Greetings” card was made with what I had left!

Once I had the papers glued down and let the glue dry completely, I coated the card fronts and the larger chipboard I planned on using with some clear gesso, grabbed up the stencil from the kit, some texture paste from my stash, and added some stenciling to the backgrounds. With the stencil still in place and the texture paste still wet, I started adding Lindy’s mediums. I didn’t want to mix the mediums into the texture paste, because I didn’t want a solid, even color! For the “Soulmate” card front, I spritzed some of the Moon Shadow Mist on the top-ish area of stenciling, sprinkled on the Magical Powder closer to the bottom then just scraped everything together – creating a little bit of a gradient effect. For the “Greetings” card front, I only used the Magical Powder, but I made sure to sprinkle it on unevenly so there would be some variation in shading after everything had dried.

I did the same basic technique with the stencil and texture paste on the larger chipboard pieces I was going to be adding to the card fronts – the only difference was with the vase. For the stenciling on the vase, I didn’t add any of the Magical Powder or scrap the Moon Shadow Mist after I added a couple of splatters, I just let it soak into the texture paste a little and carefully soaked up some of the larger drops before removing the stencil.

Once the stenciling had dried on the chipboard pieces, I decided I needed to add some of the gold to the intricate edge on the Tres Jolie Chipboard – the off-white of the original just stood out too much! I didn’t want a heavy coating, I just wanted to add some shine and create a smoother transition between the chipboard and stenciling – so I grabbed the gum arabic and magical powder, added a bit of water, and brushed it on.

After all the mediums had dried, it was only a matter of adding the chipboard flowers, phrases, and ribbon/seam binding! I used two layers of craft foam to lift the vase off the background, added some of the smaller chipboard flowers to the flowers in the vase for some depth, added a small length of the seam binding to the “Soulmate” tag – tucking the ends under the edges of the card front – and glued everything down to my base!

I glued the chipboard flowers flat on the base of the “Greetings” card, added a single layer of craft foam under the Tres Jolie Chipboard to give it a little lift, and tucked in a few of the flowers from the pack in the kit after I added some gum arabic/Lindy’s “paint” to them. I tied a bow in the last bit of seam binding I had, added it between the chipboard butterfly and the “Greetings” sentiment (backed with a small piece of craft foam), and glued the card front to the card base.

And that was it! Two cards are done in a relatively short amount of time!

I hope you enjoyed these slimline cards and they gave you some ideas of what you can make using your March 2023 kits!

Stay Crafty, Friends!

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Tres Jolie can also be found at:

In addition to the items from this month’s Cards, Tags, & More Kit and Mixed Media Kit, I used:

Ranger Opaque Matte Texture Paste, Finnabair Clear Gesso (Because it was already open! Remember, there is a DWM Clear Gesso in the Mixed Media Kit this month!!), white craft foam, Fabri-Tac, Dritz Fray-Check, Marco’s Papers Cougar Opaque Cover (130#/192.4gsm) “Natural”

Tres Jolie Kit Club–Tag Flip-March 2023 Cards, Tags, & More Kit!

Image | March 2, 2023March 1, 2023 | Corner Scraps

Hey, y’all!

Welcome to March and new projects using Tres Jolie Kits! Did you get a chance to check out the reveal yesterday? All of March’s Kits are as fabulous as ever! Make sure to swing by the Tres Jolie shop and pick yourself up a kit or three!

For my first March project, I used the Graphic 45 ATC Tag booklet/album … thingy … and the Stamperia “Garden of Promises” papers and chipboard to create a little motivational and/or photo flip-book.

Make sure you check out the video to catch my thought process and see how I put this all together!

I know Graphic 45 has dies that are made to work with their (larger) tags, I’m not sure if there is an ATC Tag one, and even if there is, it wouldn’t have worked for everything I wanted to do! My solution was simple though – I just used some clear plastic packaging, traced two tag shapes on it (side-by-side), and rough-cut it out! Why did I trace two side-by-side? So I would be able to make a few backgrounds with little flip-outs! Then all I had to do is use it to create all of my backgrounds.

Not all of my backgrounds are solid pieces, after I had cut into a few of the patterned papers, I decided to straighten up a few edges, grabbed a partial piece of an adhesive sheet I had left from a previous project added some scraps strips of printer paper, peeled the backing off, and started laying down all the various left-over strips and squares! I don’t like having a lot of little pieces laying about and I like the feeling of using up as much as I can, so paper piecing is my go-to move!

I was never concerned about having perfectly straight, neat, and tidy edges because I had planned from the beginning to distress and ink them all – which is exactly what I did! I just used my scissors to distress all of the edges – including inside the ring hole – and used the “Pale Brown” Fluid Chalk Ink for a bit of color.

After I had my bases distressed, inked, and (mostly!!) ready to go, I started the sewing process. I picked one background to stitch directly to the tag, then on the background for the flip-side, I added the stitching first, then glued it to the tag. I decided to do my stitching this way so both sides of the tag would have the top stitching showing. It doesn’t really matter as far as the stitches are concerned, but the side of the paper the needle goes through tends to be a bit rough.

As seen in the photos above, six of my tags have flaps that flip out. Of those six, four were created using a single piece I made using my template (double-width, and scored), and for the other two, I decided to make the flaps separate just because I wanted a little more control over what image was showing and which way the flap was going to flip!

I don’t like leaving folds without some kind of reinforcement when they are in a project that is interactive, and these ATC Tags were no exception – so I just added some of the seam binding from the kit to the insides of all the folds and stitched along each side.

I really loved all of the quotes and phrases found throughout the patterned papers, and I wanted to incorporate them in a variety of ways. One was I did was to use the three bookmark-looking rectangles and create some fold-down, interactive elements – mostly because the paper strips were approximately 4” long, and I didn’t want it dangling out of the bottom!

Again, I had to reinforce all of my bends, except this time I used some linen hinging tape instead of the seam binding. Not for any particular reason beyond that it was a 9” piece I had “misplaced” during a previous project, and since I finally found it, I wanted to use it up! My linen hinging tape, however, is 1-1/4” wide – about 1/4” wider than the stripes – so I trimmed off the excess before attaching it to the backs of my pull-downs.

I added stitching to the sections that were attached to the background and added the three blue chipboard butterflies to use as “handles” (One apparently got edited out from the middle photo above without me noticing! Oops!)

What did I do with a 1/4” wide, 9” strip of linen hinging tape? I cut a couple of pieces off and used them to reinforce the folds on the two fold-out pieces I added using more bits from the cut-apart sheet! And, just like with the pull-down stripes, I stitched the back of the fold-out piece to the background.

I wanted to use some eyelets that I’ve owned for far, far too long, so I grabbed up a few and added them to the pre-punched holes on four of the chipboard pieces, then glued the chipboard where I wanted it. I didn’t use the eyelets to attach the chipboard to the background paper or tags, just because I didn’t! No real reason beyond that there wasn’t a real need to!

On the tag that has the large chipboard flower cluster, I didn’t use any glue, I just stitched it along one edge and the bottom so it could work as a tuck spot.

Thank you for joining me here today on the blog! I hope you enjoyed this little project and it gave you some ideas of what you can do using this month’s Cards, Tags, & More Kit!

Stay Crafty, Friends

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Tres Jolie can also be found at: