Tres Jolie Kit Club–Tag Flip!-June 2022 Cards, Tags, & More Kit

Hey, y’all! I have my last project using this month’s Cards, Tags, & More Kit from Tres Jolie Kit Club for you today, a little, zipper-closed, tag flip book that is just perfect for jotting down notes to yourself – things you want to remember – ephemera you may want to tuck away, or just a little place to doodle in. This project is completely customizable – you can use whatever materials and colors you want. And the best part? It doesn’t even have to make sense to anybody else! It’s all you!

tagFlip-jun22ctm-04

I had quite a pile of tags already die-cut from my previous two Cards Kit projects this month that my original thought was to make a tag flip booklet that went on a book ring, but then I started laying out all my tags, and realized that what I really wanted to do was make something a little more interactive – and this was the result! Check out the video to see how I put it all together.


Video:


tagFlip-jun22ctm-01 tagFlip-jun22ctm-02

I still had a lot of die cuts left from my Memory Dex Cards, so I added them to this project. Both the butterfly on the front cover and the flower on the back were cut out of the leftover handmade paper I had from my Junk Journal project that was posted on the 9th. I added some of the Eyelet Outlet Jewels to my butterfly body and popped on a few of the Prima flowers. You can see the random, wayward stitching that I used for my zipper, who knows what kind of stitching I would have used if I had thought about a zipper closure before putting everything together!

tagFlip-jun22ctm-03

Want to add a bit of personalization to your cover material? For me, a paint pen was the way to go! A regular pen, or even a gel pen, wouldn’t work so well on this rough burlap, a marker would probably work some, but I think a paint pen was best because I can make dots just by holding the nib down and letting the paint pool.

tagFlip-jun22ctm-07 tagFlip-jun22ctm-05

I just grabbed up some washi tape I’ve had for years with quotes on it and ran it across all the back tags, then ran some silver dot washi across the top of the left side of the booklet, and the bottom of the right side to fill in a little more and give some shine. I added brads to my tag holes – mostly to use them up – and added random stitching on my KaiserCraft white cardstock tabs to give them some color.

tagFlip-jun22ctm-12

I had these little metal flips in my stash and decided to add them in with some silver brads to hold little stacks of the rest of the tags that weren’t sewn in as part of the booklet. You can also see that for some more personalization, I colored in the outer edge of my tab with a gel pen. No rhyme or reason, just grabbing up a pen that I felt like using at the moment! Having an assortment of pens comes in handy because it can also be a way to express the mood you’re feeling when adding to your booklet.

tagFlip-jun22ctm-11 tagFlip-jun22ctm-06

When it came time to put my third Cards Kit project of the month together, I found myself staring at tags and die-cuts I had already made on leftover handmade paper, and the beginning of an idea to do something that opened in more than one direction. I just started laying tags out, trying to build the “direction” of everything in my mind as I went, so I didn’t just make a booklet that had “pages” that turned from right-to-left. I cut off bits of the burlap and canvas to make flip-up, flip-downs, and flip-outs. When I ran my washi across, I wrapped it around the tags that were “pages” (not the ones made to flip up or down). I didn’t want to stamp on all of my tags, and I didn’t want to cover the whole surface – there needed to be someplace to write – so I left some of the tags bare and added in the rest of the tags I had cut.

tagFlip-jun22ctm-10 tagFlip-jun22ctm-09

With some of the smaller die cuts – either solid shapes or outlines/frames – that were from the KaiserCraft white cardstock, I added some of the silver polka-dot washi tape and some stitching around the edges. If it was just an outline, I folded the tape in half so it would stick to itself, and used it as the center of the die-cut, which was also folded in half.

tagFlip-jun22ctm-08

As you can see, there are loads of places to write little notes or tuck in bits of ephemera you want to keep!

Thank you for joining me here in my little corner, I hope you enjoyed this little tag flip booklet and it gave you some ideas for making your own personalized little booklet.

Stay Crafty, Friends


Corner Scraps can also be found at:

Corner Scraps Studio Etsy

Corner Scraps Instagram

Corner Scraps Facebook

Corner Scraps YouTube

Corner Scraps Pinterest

Tres Jolie can also be found at:

Tres Jolie Facebook

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


Tres Jolie Insta Square Frame

In addition to the items from this month’s Cards, Tags, & More Kit (*from previous Tres Jolie Kits), I used:

Some items (non-Tres Jolie) contain an affiliate link where I earn a small commission at no extra cost to you!

*49 & Market “Cream” Burlap Ribbon; Canvas Corp Canvas Fringe; Hazel & Ruby Fat Roll “Quote Me;” Scotch Silver Polka Dot Washi Tape; Aleene’s Tacky Glue; JudiKins Diamond Glaze; paperclips; brads; metal tabs; handmade paper; thread

Tres Jolie Kit Club–Needlebook-March 2022 Cards, Tags, & More Kit

Hey, y’all! Welcome back to the Corner Scraps Blog!

This month’s Cards, Tags, & More Kit from Tres Jolie Kit Club has the fabulous Stamperia “Threads” collection, and I couldn’t help but want to build on that sewing theme by making a needlebook (even if I do have to sew really slow to get it “right”)!

I know I normally try to stay with using the kit only or mostly for my first project of the month, but sometimes inspiration just strikes and you have to go with it! And don’t think you have to go out and buy fabric—think of what you have around your house. Do you have some old pillowcases you could re-purpose? An old shirt you no longer wear? Use what you have! This doesn’t use a lot of fabric, about 1/4 yard for the base construction–a standard pillowcase (20″x26″) would actually provide twice as much fabric as you need (overall, the fabric is approx. 12″x30″ + any small bits you may want to add).


Needlebook-Mar2022CTM-10

Don’t forget to check out my video to watch me putting this together!


Video:


Page by page break-down:

materiallist

Because I refer to the pages as 1 (&6), 2 (&5), and 3 (&4) in the more detailed PDF, I have decided to add “sides” for this post. For example, I have Page 1 and Page 1 side 2. Also, at the time the photos were taken, I wasn’t completely done decorating, but I think I was far along enough to show possibilities and examples?!

*Alternative: Instead of a 3-piece cover, you could just cut two pieces of fabric the size listed for the “Inside Cover.”

Needlebook-Mar2022CTM-01Needlebook-Mar2022CTM-11
The front cover: In addition to the interfacing you see me add in the video, I also added some stabilizer to my rice paper squares that I added to the cover. I stitched on three of the chipboard buttons, added some stitching around the rice paper square, and added some silk ribbon embroidery roses to the buttonholes.

The back cover: Same interfacing and stabilizer were added, but I only added the stitching around the square on this back piece. *Rice paper squares: 3-3/4” x 3-3/4” you can get to this size by cutting approximately 1/8” out from the lace edge print.

Needlebook-Mar2022CTM-18Needlebook-Mar2022CTM-09
Inside front cover: I added a couple of accent bits of fabric and a bit of trim that works well for holding some items.Page 1: This is my “Button” page, so I added my die-cut buttons along the top, a couple flaps of accent fabric to hold buttons, and the “Buttons” label cut from the front cover of the paper pad.
Needlebook-Mar2022CTM-17Needlebook-Mar2022CTM-08
Page 1 side 2: A bit of “ruler” (I don’t think it’s to scale!) cut from the paper pad and some more flaps of accent fabric.Page 2: On this page, I added the silk ribbon roses as tack points after my needlebook was together. I did it this way because the little bits of lace goes all the way across – from edge to edge – and I didn’t want to tack it down and find out I had pulled too tight causing my page to buckle when I stitched all the pages together.
Needlebook-Mar2022CTM-13Needlebook-Mar2022CTM-04
Page 2 side 2: More ribbon bits and fabric and felt flaps.Page 3: This is my “only felt” page, and I just added some bits of fabric for accent.
Needlebook-Mar2022CTM-14Needlebook-Mar2022CTM-05
Page 3 side 2: More trim tuck in spots.Inside back cover: I used my Tim Holtz “Stitched Slots” Die to create a little area for holding my threads – and found the chipboard pieces were just the right size to wrap the way-ward thread around for storing! To make sure my slots were nice and sturdy for use, this is my fabric sandwich: Fabric, iron-on adhesive, fabric, iron-on adhesive, felt, iron-on interfacing. I then, very carefully, stitched along the edges.
Needlebook-Mar2022CTM-15Needlebook-Mar2022CTM-06
Page 4 side 2: More felt, and I used that bit of trim to cover the backside of the stitches.Page 5: I only had a little section of that white trim, and I didn’t want to put it away since it was so small, so I cut out a felt heart, sewed the white trim on as far as it would go, then filled in the gap with the last little bit of green trim. The heart is only sewn onto the page down the center, so you can still lift the edges like flaps.
Needlebook-Mar2022CTM-16Needlebook-Mar2022CTM-07
Page 5 side 2: Here is the other half of those full length trim pieces! And, to remind me to mention it, I tucked some seam binding onto the page. Depending on how much you want to sew, you could always finish the edges of your needlebook with some seam binding.Page 6: Just a little bit of accent fabric with some hand stitching and a die-cut sewing machine for decoration.
Needlebook-Mar2022CTM-12Needlebook-Mar2022CTM-03
Page 6 side 2: Another “ruler” from the paper pad with some bits of fabric flaps. Lots of places in this needlebook to hold your needles!Inside back cover: I used my Tim Holtz “Stitched Slots” Die to create a little area for holding my threads – and found the chipboard pieces were just the right size to wrap way-ward thread around for storing! To make sure my slots were nice and sturdy for use, this is my fabric sandwich: Fabric, iron on adhesive, fabric, iron on adhesive, felt, iron on interfacing. I then, very carefully, stitched along the edges.

Needlebook-Mar2022CTM-02

My closure! Even though I had originally planned on using snaps, I found that the “teeth” parts weren’t long enough to make it through the felt and I didn’t want to only have it attached to a single layer of fabric. Fortunately, I *knew* I had some kind of hook and eye closures in my stash so I dug them out and threw some stitches in to hold them in place.

After all of your pages are completed, line them up and stitch down the center of your book, using some straight pins inserted at the centers to guide you.

centerPins

The “dots” are the pinheads, which aren’t lined up here, but I did make sure they were lined up — at the center represented by the dashed lines — before I ran the whole thing through my sewing machine. **Sorry this photo is blurry, I had to grab it from the video because I forgot to take an actual photo during construction!

Thank you for joining me here in my corner. I hope you enjoyed this needlebook project and it gave you some ideas of what you can do with this month’s Cards, Tags, & More Kit! Paper products don’t always have to be stationary, they can be made functional too!

Stay Crafty, Friends


Corner Scraps Can Also Be Found At:

Corner Scraps Studio Etsy

Corner Scraps Instagram

Corner Scraps Facebook

Corner Scraps YouTube

Corner Scraps Pinterest


Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!


Tres Jolie can be found at the following places:

Tres Jolie Facebook

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


mar22ctm

In addition to this month’s Cards, Tags, & More Kit, I used:

Tim Holtz “Stitched Slots” Thinlits Die; any coordinating laces, trims, fabric bits, etc. you wish to add in; Mod Podge Matte Acrylic Spray; Iron-On Adhesive (Heat-N-Bond, Pellon); Fabric Interfacing (whichever weight(s) you prefer for your project—I have light all the way to stiff interfacing/stabilizer in my needlebook); batting or heavy stabilizer (optional); Sizzix Big Shot Plus + cutting plates, CornerScrapsStudio Needlebook Pattern PDF