C.J.&#039;s Corner Scraps

In addition to this month’s Cards, Tags, & More Kit (*from previous Tres Jolie Kits), I used:

Dress My Craft “Stitched Tag #2” Die Set , Darice “Poinsettia” Embossing Folder , Darice “Snowflake Scroll” Embossing Folder , Echo Park “Candy Cane Stripe” Stencil , Hampton Art Artistic Alphabet Stamp Set , Lindy’s Gang “Oakleaf Olive” Embossing Powder , Lindy’s Gang “Holly Berry Red Gold” Embossing Powder , Gary M. Burlin Co. “Ultrafine Gold” Embossing Powder , Wendy Vecchi “Fern Green” Embossing Powder , Wendy Vecchi “Red Geranium” Embossing Powder , Ranger “Frosted Crystal” Antiquities Embossing Powder , Ranger “Aqua Tinsel” Embossing Powder , Distress Watercolor Pencils Set 2 (Salvaged Patina & Antique Linen) , Distress Oxide Spray “Antique Linen” , Distress Marker “Forest Moss” , Distress Marker “Lucky Clover” , Distress Marker “Candied Apple” , Ranger Water Brush , *Prima Water Brush , Finnabair Brushes , Ranger “Joyful” Stickles , Ranger Clear Emboss It Ink , Simon Says Stamp “Pine Needle Trio” Dies , various branch dies , Momenta Dies 2157535 , JudiKins MicroGlaze , spray bottle , We R Memory Keepers Craft Knife , Amazon Basics Laminator , Scotch 8.5”x11” Laminating Pouches

Tres Jolie Kit Club–November Memory Dex–October 2022 Cards, Tags, & More Kit

Image | October 27, 2022October 27, 2022 | Corner Scraps

Hey, y’all! For my final project of October for Tres Jolie Kit Club, I have some November Memory Dex Cards for you. I don’t have a card for every day of the month – although I think it is possible with all of the “(Inter)National Day of’s …”. I just picked the more commonly known days – and National Button Day, since we are all crafters here!

The video is a quick watch – most of the project is die cutting, layering, and gluing – so I really spend the majority of the video time with the assembly of the shaker card and I give an overview of what mediums I used.

First, a warning and apology! I am in the process of switching my recording and editing programs, and had to work out which settings were best for these new programs – so the audio for about half the video is … less than ideal. Fortunately, I think I have it worked out now, unfortunately, it is during the shaker assembly. Sorry! It really got down to the wire of working with what I had, or not being done in time!

My shaker card was the most involved card created! I decided what I really “needed” for this project was to create a large, maple leaf shaped Memory Dex card. Over on my Flickr, you can find the full-sized .jpegs of the shaker parts and my little calendar to use in your personal project(s).

I doubled up the card part of the shaker – made using some cardstock from my stash – so it would have a little extra stability when on the Rolodex tracks since it is heavier than a “regular” card. To make my solid cardstock not so solid looking, I inked up the edges with my Frayed Burlap Distress Oxide, gave it a splatter of water, dabbed up the excess, and dried everything before I glued down the solid leaf, cut from some of the patterned paper from the kit and trimmed off the bit of extra stem from the bottom.

To create my spacer ring I cut two of the outline pieces and used some hot glue between them. And honestly, I think I might have found a favorite way to create the space needed for shakers! There is no dry time, no cutting, and scissors work to trim off any parts that seep out. All I had to do is keep moving so I wouldn’t get any piled up, and if a spot got skipped over, it was easy to go back and fill it in.

For the leaf veins and “November,” I first used a gold marker in my Cameo to sketch the outlines, then I switched over to the blade to cut the pieces out. I left everything on my mat so it would be easier to work on when I added some gold foil transfer to them.

After the foil was on, I grabbed up a piece of acetate and stitched the veins and acetate together. To keep the feed-dogs of my sewing machine from marring the acetate, I just ran it through on top of a piece of tissue paper – which tears off from the stitches super easily! Then I glued down the acetate window piece to the spacer ring using some JudiKins Diamond Glaze.

Since I was in a “let’s see what I can use” mindset, wanted to add a little extra to the shaker and wanted to make sure the edges of the leaf vein cut weren’t going to snag on anything, I brushed on some Peeled Paint Stickles around the edge, and then used it to fill in along the hot glue edge to really “clean” it all up. Then the only thing left to do was flip the window over, add my sequins, and glue the base on.

After the shaker card, the rest of the cards were really just a matter of gluing all the die-cut pieces together! Each card has two layers – except the envelopes – one layer of cardstock, and one layer of patterned paper. I added a bit of random stitching and tucked in and layered up die-cuts and pieces from the cut-apart sheets in this month’s kit.

As I noted in the video, this was the day I discovered my printer had decided to retire, so my calendar is only a black-and-white printout, instead of the original design that I shared near the beginning of this post. The “Native American History Month” Card is actually one of the envelope cards, and inside it, I added a couple of little fact sheets printed from the National Congress of American Indians and the U.S. government’s Native American Heritage Month website. And of course, I have a card to remind me that Daylight Savings Time ends on the sixth, and we “Fall Back” an hour.

The eighth is our mid-term elections here in the U.S., and since I believe voting is highly important and something that should be taken seriously, I had to make a card for that day. The eighth is also the first full moon of November, known as the Beaver Moon or Frost Moon. On the eleventh, we have Veteran’s Day (also known as Armistice Day or Remembrance Day), [originally] to commemorate the end of World War I. For my November 13th card, I have another envelope, but I didn’t to say anything on the outside other than “Fun Day” since it is the Ides of November and the Festival of (the Roman God) Jupiter. And of course, as I mentioned at the start of this post, I have my National Button Day card.

For my last two cards, I have one for (American) Thanksgiving – which signals the start of the Holiday shopping season, so I had to make a card for Small Business Saturday! Don’t forget to support small businesses!!

I used a set of Hampton Art Alpha stamps with my Frayed Burlap Distress Oxide or one of my StazOn inks to stamp the titles and dates and sometimes added some gold embossing powder to make areas stand out a bit more.

Thank you for joining me here in my corner! I hope you enjoyed this project and it gave you some ideas of what you can make using this month’s Cards, Tags, & More Kit! Make sure you check back with us on Tuesday when the November Kits are revealed! You’re going to love them!

Stay Crafty, Friends

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Tres Jolie can also be found at:

In addition to this month’s Cards, Tags, & More Kit (*from previous Tres Jolie Kits), I used:

Some (non-Tres Jolie) items may contain an affiliate link, allowing me to earn a small commission at no extra cost to you!

*Gary M. Burlin Co. “Ultrafine Gold” Embossing Powder , BoBunny “Sentiments With Love” Stamp Set , BoBunny “Lovely Leaf” Dies , Prima “Holographic Dreams” Foil , Dress My Craft “Crochet Doily” Die , *Dress My Craft “Classic Doily” Die , Distress Stickles “Peeled Paint” , Distress Oxide “Frayed Burlap” , Tim Holtz “Skeleton Leaves” Thinlits , Tim Holtz “Flower Field” Thinlits , Tim Holtz “Tiny Tattered Florals” Thinlits , Ranger Big Emboss It , Ranger Emboss It Pen , Ranger “Vintage Pearl” Embossing Powder , StazOn “Timber Brown” , StazOn “Royal Purple” , Hampton Art Alphabet Stamp Set , cardstock from my scraps pile , Lucy’s Cards “Warm Golden Glow” Little Things , Lucy’s Cards “Tequila Sunrise” Little Things , Heidi Swapp Memory Dex Dies , unbranded “ –dex” dies , Hampton Art Gold Calligraphy Marker , Recollections 6”x6” Clear Acetate Sheets , We R Memory Keepers 3-Way Corner Punch , We R Memory Keepers Tab Punch , Heidi Swapp Memory Dex Punch , Spellbinders Tool ‘n One , Dear Lizzy Date Stamp , K. Barteski Roller Stamp , unknown sequins , unknown seed beads , hot glue gun (high & low heat) , Gorilla Mini Hot Glue Sticks , JudiKins Diamond Glaze , Art Glitter Glue , Fabri-Tac , Schmetz Super Universal Sewing Machine Needles (Teflon Coated) , McGill Flower Shaping Tools , blending brushes , foam mat

Tres Jolie Kit Club–Mixed Media Cards–September 2022 Cards, Tags, & More Kit

Image | September 29, 2022September 29, 2022 | Corner Scraps

Hey, y’all! It’s officially been autumn for a week now, and I don’t know about you, but I’m still wearing shorts! It’s the give and take of living in a southern state. Mild winters, which makes the husband’s hot-mess joints happy; but less-than-desirable (for me) hot and humid summers. As for me, I’d be happy with two seasons – spring and autumn! The best temperatures and the best colors!

It is almost October, and besides the lower temperatures here in the northern hemisphere, the October Kits from Tres Jolie Kit Club will be getting revealed on Monday! YAY! New crafty supplies and lower temperatures? Yes, please! So, to bring September and the summer to an end, I have two more cards this month – with a little extra touch to them using mixed media mediums.

Neither of these cards is difficult – the majority of their assembly time is spent just waiting for the mediums to dry. Check out my video to see how these two cards came together.

Now, let’s get to some photos and highlights of what you saw in the video.

This first card is a step-card that I created. I used a dark pink cardstock for the base topped with some white, printer-weight cardstock. I did put a solid back on my step-card, which also required a couple of extra pieces tucked in to make sure my “Let’s Celebrate” square popped forward when the card was standing up.

Before I glued on the patterned paper, I added some light mixed media. I used the DecoArt Crackle glaze from this month’s Mixed Media Kit with the Prima stencil from the August (2022) Mixed Media kit, and before I removed the stencil, I added a little dusting of some Jaquard PearlEx powder, and a little spritz of Finnabair’s “Pixie Dust” Fixative . Then I just set those pieces off to dry while I worked on the center pieces.

I used the dies from the kit this month to add some decorative cuts at the tops of the patterned paper that would be going on the steps and backed them with a piece of paper that I coated in the beautiful ink from the kit. Now it was just a matter of gluing everything down!

I added the patterned paper that I had stenciled on and started building up my steps. I glued the top of the back step patterned paper to the back of the card, and the bottom of the back step patterned paper to the back of the lower step. Then, to help keep the “Let’s Celebrate” square stay forward, I added some extra pieces of white cardstock to help “push” it forward.

When everything was done, I added some of the Prima gold trim circles to the front and gave the card a final spritz of Finnabair’s “Pixie Dust” Fixative for a little extra shine.

This slimline card went together even faster than the step-card, because I didn’t have any cut files! I used another piece of dark pink cardstock as the card base, set it aside, and started working on my layers.

Since the slimline card is 4” x 10”, and the pink and white striped paper from the kit was an 8” x 8” square, I cut one piece 6” long and a second piece 2” – both are 3.75” wide – I knew the seam would never be seen by the time I was done! (I used some double-sided tape to hold the two pieces together at the seam while I kept working!)

I mixed some of the ink from this month’s kit with some of the glitter paste from this month’s Mixed Media kit together and lightly brushed it along the edges of the flowers, and then added what was left to the striped paper. After the glitter paste had dried, I grabbed up some white texture paste and a palette knife, scraped a thin layer of the paste onto the surface of the striped paper, and used a paint comb to add some stripes to the texture paste; then I glued the striped pieces down to the white cardstock.

Once the texture paste had dried, it was just a matter of gluing all of my flowers down, along with some leaf die cuts (using a die from my stash), a few bits of lace trim, and the sentiment square. I used my hot glue gun for all of this, so I was able to move right to adding the sequins to the front after adding the top “For Someone Special” sentiment at the top and a little square of the same teal paper at the bottom just to have that blue “continue” all the way down. All I did to add the sequins was use some more texture paste, watered down a little to make it more spreadable, dipped a brush into the paste, use it to pick up some sequins, and “brush” them on.

Thank you for joining me here in my little corner! I hope you enjoyed all of the cards I created this month and they gave you some inspiration and ideas for your own cards!

Stay Crafty, Friends

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Tres Jolie can also be found at:

In addition to this month’s Cards, Tags, & More Kit and the Crackle Glaze & Sparkle Texture Paste from this month’s Mixed Media Kit (from previous Tres Jolie Kits), I used:

**Disclaimer: Some [non-Tres Jolie] items may contain an affiliate link, allowing me to earn a small commission at no extra cost to you!**

*Prima “Tubaroses” Stencil, *Jacquard “Brilliant Gold” PearlEx, *Finnabair Pixie Dust Fixative, *Buttons Galore & More “28 Lilac Lane”, Ranger Opaque Matte Texture Paste, Momenta Dies 2157535, heavy cardstock – dark pink, white printer weight cardstock, Spellbinders Tool ‘n One, Silhouette Cameo 3, Nicapa Mat, Silhouette Premium Blade, Sizzix Big Shot Plus, spray bottle, 1” double-sided tape, Art Glitter Glue, Gorilla Mini Hot Glue Stick, hot glue gun, lace trim

Tres Jolie Kit Club – Pop-up Cards – September 2022 Cards, Tags, & More Kit

Image | September 8, 2022September 8, 2022 | Corner Scraps

Hey, y’all! We’re two-thirds of the way through 2022, and hopefully us folks in the Northern Hemisphere will be seeing autumn soon – or maybe you are already shaking out your sweaters and enjoying the relief from our hot, dry summer. For those of you south of the equator, I hope you are having a lovely beginning to spring & that your summer is better than ours!

Have you checked out the September 2022 Kits from Tres Jolie Kit Club yet? They are, as always, absolutely fabulous! Make sure you swing by and get yours before they’re gone!

This month with the Cards, Tags, & More Kit I will be making cards. All month! I know, I’m just as shocked as you are! I normally can’t resist seeing what else can be done with the kit! This week’s cards are a couple of pop-up cards I created, next week will (should!) be my mood board project using the Scrapbooking Kit, then on the 22nd a couple of fold-out cards, and I’ll finish out the month with a couple of mixed media cards (using a couple of the mediums from the Mixed Media Kit) on the 29th.

Two cards, two different pop-ups inside! Both are a little smaller than an A4 paper (folded in half), to match the larger, A4-ish-sized patterned papers in this month’s kit. Make sure you check out the video to see how these two cards came together!

In the video, you saw that I cut all my parts out for both cards before sitting down to start the assembly process – here I’ll talk about each card individually.

This first card goes together quickly and easily! After I cut my pop-up base from a 12”x12” sheet of white cardstock, picked out the patterned papers I wanted to use and cut the inside pieces, there wasn’t a lot to do besides glue it together.

I used the two larger dies from the set in this month’s kit to cut out a couple of sections from the paper I used on the inside of the card. I lined up the dies along the left then the right edge so I could have the pink stripes on both sides of the die cut and just lined them up under the “Happy Birthday” circle – with its edges inked using the “Pearlescent Orchid” – to cover the seam.

I added some stitching around the perimeter of the “Happy Birthday” circle, the outside paper, and the two larger “flat” pieces on the inside.

For the inside, I inked the three pop-ups that were going to have the pieces from the sentiment square on them to give them a little extra definition then I glued all of my base pieces in place. I used the smaller decorative die to cut out the left edge of the sentiment square and to create a temporary stencil from a scrap of paper to use with the “Pearlescent Orchid” ink – allowing the ink to show up through the cut-out. I used the smaller frame die to give me the clean cut along the right side of the cut-out and to give me a clean cut for the flower edge that I cut off the square.

I decided I wanted to give the greetings a little sparkle, so I used a glitter pen to color in and trace the “Happy Birthday” on the front circle and “Have the Best Day” on the inside sentiment. Then I added some foam squares to the front circle and inside sentiment and floral edge and glued everything in place.

This second pop-up card was a little more work on the inside, but I made it so it could sit open if wanted. It was created so the pop-up section would be close to the front edge of the card when it opened and be surrounded by the folded flowers – which is why the pop-out section sticks out past the edge when closed.

This card wasn’t hard to put together, but I did have to be careful because the pop-up strips along the top were more “fragile” the skinnier they became!

The process for the assembly was the same as the first card – I cut out my card base, picked the patterned papers I wanted to use, and cut out the pieces for the inside. I added the “Pearlescent Orchid” to the top cover strips for the pop-out, distressed and inked the edge of the “Thinking of You” square on the front, and inked about half of the back so the part that extended past the edge of the card would have some color. I used the two largest dies on the “Your Are Bloomin’ Lovely” circle, flipped over the top and bottom parts that cut off, and inked them to give a bit of contrast. Before I glued everything together, I added a bit of stitching to the inside and outside patterned papers and the front square and grabbed a couple of Gelly Roll pens to accent the greetings and color in the die-cut holes on the inner sentiment.

Now that the easy part was over, the tricker part began! I cut out quite a few simple flower shapes to use as additional pop-ups, then carefully started their attachment process!

The first step to creating these pop-up flowers was to overlap the two edges of the “V” so they would form a cone shape, then after that glue was dry, I haphazardly folded them in half where the petal edges met. The darker lines in the image below are where I folded all of my flowers, the lighter dashed lines are optional areas to fold – depending on how “wrinkly” you want your flowers. There isn’t any wrong way to fold them!

After all of my flowers were folded, I started the process of adding them to the card – working carefully around the top strips of the pop-up!

I built my pop-up flowers on top of each other to create clusters that would unfold together. I started by gluing a petal edge to the “back” of the scenes (the underside of the top of the card when it is closed), then worked my way out attaching petal edges together along the way so when the card was opened they would all unfold together. (I hope I explained that well. I don’t always turn images and actions into words successfully!)

I used the large flowers along the sides, a couple at the top – which helped support the pop-up strips – and added the smaller flowers as a few centers and along the front of the sentiment pop-up.

Now, after the card has been opened, the pop-up flowers can be reshaped a little after being in an envelope and left out to look at!

Thank you for joining me here in my corner! I hope these pop-up cards inspired you and gave you some ideas of what you can do using this month’s Cards, Tags, & More Kit!

Stay Crafty, Friends

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Tres Jolie can also be found at:

In addition to this month’s Cards, Tags, & More Kit (*from previous Tres Jolie Kits), I used:

**Disclaimer: Some [non-Tres Jolie] items may contain an affiliate link, allowing me to earn a small commission at no extra cost to you!**

Tres Jolie Kit Club–Cottage Life Cards–July 2022 Cards, Tags, & More Kit

Image | July 28, 2022July 27, 2022 | Corner Scraps

Hey, y’all! We’ve made it to the end of July, and are that much closer to the end of this oppressive summer heat! (I hope!!)⁠
⁠
For my last project using the July 2022 Cards, Tags, & More Kit from Tres Jolie Kit Club, I used up the bits and pieces of the Graphic 45 “Cottage Life” papers I had, along with some cardstock, dies, and mediums from my stash, to create some cards & envelopes.⁠

To get all the details of what I did for these cards, check out my video!

Video:

All of the cards are rather straightforward. I used my last two uncut sheets of the “Cottage Life” paper to make two envelopes for 3-1/2”x6” cards – the largest size envelope that can be made using an 8”x8” sheet on the We R Memory Keepers Envelope Punch Board – and used two pre-made envelopes and card blanks for the other two cards.

This first card is made with some metallic cardstock from DCWV and decorated using the TCW stencil from June’s Mixed Media Kit, texture paste from my stash, and embossing powder. I sprinkled the embossing powder on the texture paste while it was still wet, and waited until it dried before heating it up. Although you can heat dry texture paste on its own, because you can keep the heat farther away and in constant motion, it doesn’t work as well when the paste is topped with embossing powder! The heat needed for embossing powder – or rather the heating method – can, and generally will cause the wet texture paste to form bubbles.

After my embossing powder was heated and cooled, I sprinkled on some of Lindy’s “Bavarian Blue” Magical Powder that is in this month’s Mixed Media Kit, gave it a spray of water, and let it spread out between the stenciling! I had the framed phrase that I made when I was working on the “Cottage Life” décor piece (the project posted on the 21st), so I added it to my card front and stamped a simple sentiment on a strip of cardstock to finish out my card front.

For the envelope, I used a Vicki Boutin stamp and die set from my stash to create the little windows. Before I folded the envelope up, I used the rose die to make the windows in the envelope and glued in some faux glassine that I had stamped and embossed with the coordinating rose stamp.

I didn’t do anything to the envelope for this card except fold it! Honestly, I just couldn’t think of anything I wanted to have premade, and decided to wait until the time came to use it!

For the card, all I did was cut a couple of the wider strips of the patterned paper to the length I needed and a strip of cardstock to the length and width I needed for the top section with the sentiment. Before I added the cardstock with the sentiment, I added some “Mowed Lawn” Distress Oxide Spray to the patterned paper. I didn’t intend to add so much, sometimes my hands have a mind of their own! Anyhow, I just wet it and mopped it up a bit. It was already there, so I just worked with what I had!

After I stamped my sentiment, I decided I wanted to have it stand out more, so I traced it all with a metallic pen, then I added my mini pearls, and this card was done.

The next two cards were made using some card and envelope blanks by Recollections from my stash.

For this card, I grabbed my 1.5” hexagon punch, a set of hexagon dies, and my bird silhouette dies. I didn’t want to cover the whole front of the card with hexagons, so I just randomly placed them in a way that I thought looked good and added my birds. To make the birds stand out, I hand drew a line for them to stand one, outlined them in coordinating metallic pens, and then used a dark grey pen for their shadows – just smearing out it with my finger. I stamped the sentiment on a little piece of my homemade glassine and added it to the card front. Super quick and easy card!

For the envelope, I place my hexagon dies inside the envelope so I could cut out some windows, added my birds, and then backed them with some of my homemade glassine.

For the fourth and final card, I just filled up the card front with blocks of the patterned paper and added a few flowers tucked under the chipboard piece. Very quick and easy card front – especially with the use of a pre-made card base!

The envelope wasn’t as quick and easy! When I first started playing with the faux glassine technique I learned from Nik the Booksmith, I had used this cute little stamp from my stash to stamp on a piece of tracing paper, then used some colored pencils to fill it in before spraying it with the glossy spray and turning it into a [faux] glassine print! Since I had already cut it in half (I had been thinking of doing something else with it originally) I decided that I needed to create a window pane for my envelope.

For the cute little scene “outside” the window, I wrapped some blue-ish faux glassine (created previously using the wax method) around the white side of a piece of the cover from the Graphic 45 stack and placed it behind my showering squirrels! I also have some foliage bits along the bottom that I was able to cut from some of the green print. Not a lot, because my die was bigger than the piece of paper I had to work with, but there is some there!

After I cut out four rectangles from my envelope to create the window opening and gluing in my squirrels, I added in strips of the patterned paper to help bring it to life … and also possibly because my craft knife got away from me and I accidentally cut across one of the cross pieces so I had to find a way to put my window back together! Well, that led me to then having to make sure my edges were all evenly sized so I added the blue strips of patterned paper and finally made four, 3/8” wide strips of the paper used around the outer edge.

Thank you for joining me here in my corner! I hope these cards inspired you and gave you some ideas of what you can do using the Graphic 45 paper and chipboard found in this month’s Cards, Tags, & More Kit.

Stay Crafty, Friends

Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!

Tres Jolie can also be found at:

Corner Scraps Studio Etsy

In addition to the items from this month’s Cards, Tags, & More Kit and a little from this month’s Mixed Media Kit (*from previous Tres Jolie Kits), I used:

Disclaimer: Some [non-Tres Jolie] items may contain an affiliate link, allowing me to earn a small commission at no extra cost to you!

TCW Slimline Stencil “Circular Rings” , BoBunny “Sentiments With Love” Stamp Set , Gary M Burlin Co. “Patina Bronzed Copper” Embossing Powder , Prima *“Watercolor Floral” Flowers , Eyelet Outlet Jewels Multi Pearls “Green” , Ranger *Letter It “Party” Clear Stamps , Stampendous “Squirrel Shower” Cling Stamp , Vicki Boutin “All The Good Things” Stamp & Die Set 2 , Distress Oxide “Prize Ribbon” , Distress Oxide “Mowed Lawn” , Distress Oxide Spray “Mowed Lawn” , Ranger Texture Paste “Opaque Matte” , Simon Says Stamp “Barely Beige” , StazOn “Olive Green” , Recollections Value Pack Cards & Envelopes “Kraft” & “Ivory” , Tim Holtz “Silhouette Birds” Thinlits , Tim Holtz “Flower Field” Thinlints , Tim Holtz Stamp Platform , EK Tools Score Board , We R Memory Keepers Envelope Punch Board & Craft Knife , Sizzix Big Shot Plus , Fiskars 1.5” Hexagon Squeeze Punch , DCWV “Linen Closet” Cardstock Stack , Sakura Gelly Roll Metallic , Gelly Roll Glaze , & Gelly Roll Souffle , Faber-Castell “Black” PITT Artist Pens , Aleene’s Tacky Glue , JudiKins Diamond Glaze , Art Glitter Glue , Mod Podge Gloss Clear Acrylic Sealer , double-sided adhesive foam squares , 1/4” double-sided tape

Tres Jolie Kit Club–Tag Flip!-June 2022 Cards, Tags, & More Kit

June 23, 2022June 15, 2022 | Corner Scraps

Hey, y’all! I have my last project using this month’s Cards, Tags, & More Kit from Tres Jolie Kit Club for you today, a little, zipper-closed, tag flip book that is just perfect for jotting down notes to yourself – things you want to remember – ephemera you may want to tuck away, or just a little place to doodle in. This project is completely customizable – you can use whatever materials and colors you want. And the best part? It doesn’t even have to make sense to anybody else! It’s all you!

I had quite a pile of tags already die-cut from my previous two Cards Kit projects this month that my original thought was to make a tag flip booklet that went on a book ring, but then I started laying out all my tags, and realized that what I really wanted to do was make something a little more interactive – and this was the result! Check out the video to see how I put it all together.

Video:

I still had a lot of die cuts left from my Memory Dex Cards, so I added them to this project. Both the butterfly on the front cover and the flower on the back were cut out of the leftover handmade paper I had from my Junk Journal project that was posted on the 9th. I added some of the Eyelet Outlet Jewels to my butterfly body and popped on a few of the Prima flowers. You can see the random, wayward stitching that I used for my zipper, who knows what kind of stitching I would have used if I had thought about a zipper closure before putting everything together!

Want to add a bit of personalization to your cover material? For me, a paint pen was the way to go! A regular pen, or even a gel pen, wouldn’t work so well on this rough burlap, a marker would probably work some, but I think a paint pen was best because I can make dots just by holding the nib down and letting the paint pool.

I just grabbed up some washi tape I’ve had for years with quotes on it and ran it across all the back tags, then ran some silver dot washi across the top of the left side of the booklet, and the bottom of the right side to fill in a little more and give some shine. I added brads to my tag holes – mostly to use them up – and added random stitching on my KaiserCraft white cardstock tabs to give them some color.

I had these little metal flips in my stash and decided to add them in with some silver brads to hold little stacks of the rest of the tags that weren’t sewn in as part of the booklet. You can also see that for some more personalization, I colored in the outer edge of my tab with a gel pen. No rhyme or reason, just grabbing up a pen that I felt like using at the moment! Having an assortment of pens comes in handy because it can also be a way to express the mood you’re feeling when adding to your booklet.

When it came time to put my third Cards Kit project of the month together, I found myself staring at tags and die-cuts I had already made on leftover handmade paper, and the beginning of an idea to do something that opened in more than one direction. I just started laying tags out, trying to build the “direction” of everything in my mind as I went, so I didn’t just make a booklet that had “pages” that turned from right-to-left. I cut off bits of the burlap and canvas to make flip-up, flip-downs, and flip-outs. When I ran my washi across, I wrapped it around the tags that were “pages” (not the ones made to flip up or down). I didn’t want to stamp on all of my tags, and I didn’t want to cover the whole surface – there needed to be someplace to write – so I left some of the tags bare and added in the rest of the tags I had cut.

With some of the smaller die cuts – either solid shapes or outlines/frames – that were from the KaiserCraft white cardstock, I added some of the silver polka-dot washi tape and some stitching around the edges. If it was just an outline, I folded the tape in half so it would stick to itself, and used it as the center of the die-cut, which was also folded in half.

As you can see, there are loads of places to write little notes or tuck in bits of ephemera you want to keep!

Thank you for joining me here in my little corner, I hope you enjoyed this little tag flip booklet and it gave you some ideas for making your own personalized little booklet.

Stay Crafty, Friends

Corner Scraps can also be found at:

Corner Scraps Instagram

Corner Scraps Facebook

Corner Scraps YouTube

Corner Scraps Pinterest

Tres Jolie can also be found at:

Corner Scraps Studio Etsy

In addition to the items from this month’s Cards, Tags, & More Kit (*from previous Tres Jolie Kits), I used:

Some items (non-Tres Jolie) contain an affiliate link where I earn a small commission at no extra cost to you!

*49 & Market “Cream” Burlap Ribbon; Canvas Corp Canvas Fringe; Hazel & Ruby Fat Roll “Quote Me;” Scotch Silver Polka Dot Washi Tape; Aleene’s Tacky Glue; JudiKins Diamond Glaze; paperclips; brads; metal tabs; handmade paper; thread

Tres Jolie Kit Club–Memory Dex Cards!–June 2022 Cards, Tags, & More Kit

June 16, 2022June 10, 2022 | Corner Scraps

Hey, y’all!

We’re halfway through June, and this week I have some Memory Dex cards for you that I created using items from this month’s Cards, Tags, & More Kit from Tres Jolie Kit Club and items from my stash – quite a few from previous Tres Jolie Kits! Check out my video to see what I did for each of the cards I made – then grab up your supplies and create your own Memory Dex card(s).

I had bought the Heidi Swapp Memory Dex Spinner quite some time ago, and had originally thought of grabbing up some spray paint and changing the color – I might still do that – but I grabbed it up for this project so I’d have someplace to put my cards when they were done, and to make sure I didn’t make them too tall to clear the bottom! Depending on what kind of “–dex” system you have – be it a spinner, a box, something vintage, or something custom made – you can get very creative on how your Memory Dex cards are made! If, for example, you have the Memory Dex Box, you don’t have to worry about height, only width! (After this project was completed I happened to find a vintage Rolodex® system that would allow cards to fit in without any height or width restrictions!! *happy dance*)

Video:

A closer look at the cards I made:

My Concord & 9th “Lucky” Die cuts the three layers – thick line and outline from one die, thin line from another – so I made two lucky cards. The thick line and outline were cut from a half sheet of the white cardstock that I hand-inked up using a variety of Distress Oxides from my stash. The white pieces were from another partial sheet of the KaiserCraft cardstock, and on some of those, like the butterfly, I added some Distress Oxide to give a pop of color. I didn’t have any particular plans when I set out to make my cards, I just cut a lot of pieces and started layering; generally ending with a few of the Eyelet Outlet jewels and/or some of the small Prima butterflies.

I made my “Imagine” card a shaker card by cutting a circle out of the pink striped paper from this month’s kit, adding a sheet of craft foam with a circle cut out as a spacer, and filling it with some of the beads and sequins from the Buttons Galore cube from Septembers (2021) Cards Kit. I just used some plastic from an old package of die cuts – I often save the harder/stiffer plastic packaging for just this reason! – and stitched it in place with some metallic silver thread. My “Imagine” as a layer of the “Gamboge” Stencil Butter on it from the Mixed Media Kit and, while it was still wet, I sprinkled some Lindy’s Magical Powder on and spritzed it with a little water.

These two cards were really a couple of “let’s see how these parts work together” cards! The “grateful” card has a slot cut from the top (the label die from Tim Holtz’s “Stitched Slots”) that I just tucked a couple of large die cuts into after giving them a little color. The flower is just inked with some Distress Oxide, and the leaves have some Lindy’s Magical’s sprinkled on them. I cut the card from my inked KaiserCraft sheet, backed it with some of my leftover handmade paper, and added some stamping, jewels, & butterflies. The “grateful” had originally been stamped, but it didn’t show up very well, so I traced over it with a gel pen.

I wasn’t sure when I cut it if I would use the Bird Branch die, but I added some Magical’s, let it dry, and thought about what I’d do with it while working on other cards. Eventually, it came time to play with it, and I found that I liked how it looked with the oval frame, but the frame needed some color too! So on went some Magical and PearlEx powders. The card is another cut from my inked sheet and has some of the “Grecian Gold” Modeling paste (from the Mixed Media Kit this month!) dabbed on with my finger for a little shine. Then, to add a bit from this month’s Card’s Kit, I popped on a tab punched from one of the papers, added some orange jewels, and a Tim Holtz “Small Talk” sticker from my stash.

These two Memory Dex cards were made from a piece of scrap cardstock that I practiced a couple of mixed media ideas on. I have some texture paste, mica powder, and Magical powder on the base tag/Memory Dex, then I stamped the butterfly from the stamp in this month’s kit, I cut a tag-shaped frame out from my inked paper, layered a couple of more tags vertically, popped in a flower, added my jewels and phrase.

While I was doing all of my cutting, I decided to make a round Memory Dex card, so I used one of my circle dies to cut out the inked stenciling I had done (stencil from this month’s Mixed Media kit!). I stamped on the butterfly and phrase, attached a rectangle bottom, and ran it through my sewing machine a few times. The final touches were some Distress Oxide around the edges and the jewels.

When I first started this card I had thought of just attaching the pocket to another card, but as I was putting it together, I decided that I much preferred the pocket as the card! The top slot is backed by some pink cardstock from my stash, and the rest of the slots are back with white cardstock – what had been the original Memory Dex shaped card. The Tim Holtz “Stitched Slots” die is the perfect size for the spinner, I just punched the slots at the bottom and popped it right on. I used some of the smaller tags, cut with the tag dies from this month’s kit and cut from this month’s papers, to stick on some “Small Talk” phrases and slipped them into the slots. They don’t weigh a lot, so the friction between the papers is enough to hold them in place when they are upside down on the spinner. I then just added some of my die-cut hearts, outlined them with a yellow gel pen, added the label, and another “Small Talk” sticker.

The card with the bicycle stamped on it was probably the fastest to put together because all I did is layer up the different circles I had already cut out! I used the pink striped circle to fill the circle in the card base, then put the layers through my Sizzix using the dot embossing folder that had come with the machine, added that half-circle with some Lindy’s Magical’s stenciled on, and then all of the other plain circles. To add some contrast to all those circles, I popped on one of the smallest tags, then stamped on the bicycle and added the butterfly and phrase.

My “Spring” card was my first of the batch! I trimmed an inch off the width of a 3”x5” index card so it would fit on the spinner, used the stamp from this month to just get the flowers to peek out from behind the tag, and splattered it with some “Lemon” Glossy Spray. The tag is from some pink cardstock I had that was already adhered to an adhesive sheet. I used the thin scraps from my Folio at the beginning of the month, and just randomly layered them on the adhesive. I then cut the tag using the next to largest die in the set, peeled the protective paper the rest of the way off, and brushed on some Finnabair Mica Powder. Then I just finished up the details with some flowers, jewels, a butterfly, and the small tag.

Lastly, my “document” card. The die-cut word was too long to fit on the Memory Dex Spinner, so I cut it where it could be hyphenated, clipped off an end of the cross-mark on the “t” to use as the hyphen, and layered up a couple tags and a tab on the base card. I used some of the “Grecian Gold” Modeling paste on “document,” the stars and diamonds are from my Concord & 9th Lucky Die Set, there’s a little stamping, and a few jewels, and this card was done!

Thank you for joining me here in my corner! I hope you enjoyed seeing these cards and they inspired you to make your own Memory Dex card or two!

Stay Crafty, Friends

Corner Scraps can also be found at:

Corner Scraps Instagram

Corner Scraps Facebook

Corner Scraps YouTube

Corner Scraps Pinterest

Tres Jolie can also be found at:

Corner Scraps Studio Etsy

In addition to this month’s Cards, Tags, & More Kit (*from previous Tres Jolie Kits), I used:

Some items (non-Tres Jolie) contain an affiliate link where I earn a commission at no extra cost to you!

Lindy’s Gang: Magical Shaker: *Guten Tag Teal, *Oktoberfest Orange, & Yodeling Yellow, & *Magical “Bougainvillea Fuchsia;” *Jacquard PearlEx “Misty Lavender;” Ranger/Dina Wakley: *Glossy Spray “Lemon;” Prima/Finnabair: *“Vintage Roses” & *“Pearls & Crystals” Mica Sets; Darice: *“Mosaic Butterfly” Embossing Folder; *Embossing Essentials “Oblong Frames,” & *Embossing Essentials “Oblong Doily Frames;” Dress My Craft: *“Classic Doily” & *“Crochet Doily” Dies; Buttons Galore: *“28 Lilac Lane;” Ranger Opaque Matte Texture Paste; StazOn “Olive Green” StazOn “Royal Purple” Ranger/Tim Holtz: Distress Oxide Spray “Dried Marigold” Distress Oxide “Speckled Egg” Distress Oxide “Squeezed Lemonade” Distress Oxide “Kitsch Flamingo” Distress Oxide “Villainous Potion” Distress Ink “Villainous Potion” Distress Ink “Speckled Egg” Ranger/Wendy Vecchi: Archival Ink “Watering Can” idea-ology/Tim Holtz “Small Talk” Concord & 9th “Lucky” Die Set, Heidi Swapp: “Imagine” Die, “Document” Die, Memory Dex Dies (Oval) Memory Dex Punch & Memory Dex Spinner (Black) Spellbinders Tool ‘n One & Standard Circle Nestabilities; We R Memory Keepers 3-Way Corner Punch & Tab Punch; Sizzix: Big Shot Plus (Big Shot Plus Starter Kit) Sizzix/Tim Holtz: “Tattered Florals” & “Bird Branch” Bigz Dies, & “Stitched Slots” Thinlits; Sakura Gelly Roll Moonlight & Gelly Roll Souffle Pens; Scrapbook Adhesives 12×12 Adhesive Sheet; Aleene’s Tacky Glue; Krylon Workable Fixatif; JudiKins Diamond Glaze & MicroGlaze; Art Glitter Glue; adhesive foam squares; Tonic/Tim Holtz Stamp Platform; We R Memory Keepers 3-way Corner Punch; Unbranded Memory Dex/Rolodex Dies; blending brushes; 1/4” & 1/8” double sided tape, craft foam; *spray bottle; 3×5 index cards

Tres Jolie Kit Club–Tag Folio!-June 2022 Cards, Tags, & More Kit

June 2, 2022June 1, 2022 | Corner Scraps

Hey, y’all!

Welcome to June! Did you get a chance to check out the kit reveals yesterday? This month’s kits are just fab!

For my first June project, I made a little tag-filled folio using this month’s Cards, Tags, & More Kit from Tres Jolie Kit Club, a few extras from my stash (ink, thread, & eyelets), and a cut file I created (I have the measurements I used listed below!).

So, grab your supplies and make yourself a little tag-folio!

I have a two-part tutorial (well, I talked a lot at any rate!) for this folio, part 1 is the tag cutting and base construction, and part 2 is the decorating and final touches. I go over cutting your folio base by hand if you aren’t using an electronic cutting machine, and my assembly process when putting everything together.

Part 1: Tag Cutting & Base Construction

Part 2: Decorating & Final Touches

First, a quick look at all the tags I made for my folio. I die cut a full sheet of the white cardstock, and six sheets of the patterned paper into a variety of tags – some to use this week, some to have ready for the rest of my projects this month. I used the white tags as my base, tore the patterned paper tags at about a 1/3rd – 2/3rd split, and mixed and matched the sides. I have had those butterfly eyelets for years now, and I thought it was about time to use some up, so I popped them into the holes on the tags.

I used a full sheet of the white cardstock to make my base. I have vertical score lines at 3-3/4”, 4”, 4-1/4”, 7-3/4”, 8”, and 8-1/4” and a horizontal score line 6” from the top. I didn’t cut the bottom 1/2” with the barcode and “KaiserCraft” off my sheet, so I have a score line at 12” also. I actually used that little bit during the construction to “protect” the bottom edges of my pockets during construction! Check out the image below to see all the measurements, plus I have some slot placement templates.

Slot Measurements:

Slot positioning templates are available as a PDF from my personal (non-Tres Jolie!!) DropBox for personal use only, please (attribution appreciated, but not required). When printed, the panels should be 4”x6” for an easy lineup with your edges and score lines – although printers & printer settings may vary! (Note: when testing, I made sure to print “actual size” from the printer dialog box and not “to fit” because Adobe and/or my printer wanted to make the 8-1/2”x11” image smaller to fit with margins on an 8-1/2”x11” sheet of paper!)

I made a pocket for each slot of my folio, but I have also added the measurements for alternate pockets so you have a variety to choose from:

*Measurements are to the center of the slot*

Part 1 of my videos covers the construction of the folio base, so I’ll just add some refresher details here on the blog. I lined my pockets up carefully, and got them in place – they are sized to be able to just be folded in half to fit – more or less – there may be a couple that requires some tweaking by folding slightly more than half. I used a combination of double-sided tape and glue to hold everything together – because I like adhesion! You could easily put it all together with just one or the other!!

Before I folded the folio over to close it up, I added a length of the seam binding from the kit across the middle, cut a slot in the hinge between the middle and last panel so I could feed the seam binding through and I would be able to tie it together when that last panel was folded in. For the end of the seam binding that came out of the edge of the folio, I added a couple of tiny staples to help keep it in place through all the tying.

I wanted to reinforce the hinges some, but I didn’t want to add a lot of bulk, so I used the cover sheet from the paper pack to reinforce the hinges on the [folded over] inside of the folio and to reinforce and add some more color to the hinges between the panels on the [visible] inside of the folio. After I had the folio folded in half and glued together, I added the last bit of seam binding to the outside of my hinges to help reinforce all the bending of the paper and cardstock.

With my base finally put together, it was time to start getting the finishing touches done, so I added the papers I had chosen for the outside of the folio. Since I was going to be adding stitching around my edge, I didn’t worry about making sure my adhesive went all the way to the edge, if you aren’t going to add stitching, you will want to make sure you have a secure seal so your cover paper doesn’t pull up!

Even though I wasn’t going to be doing my stitching yet, I wanted to get my holes made so I would know where my stitching would be, so I made a template that would help me make sure everything was spaced evenly and lined up where I wanted them. You can grab that template as a PDF from my personal DropBox if you would like to use it for your personal folio. I have it made to print on two sheets, with a little overlap in the middle to help line the holes up. Printers being what they are, you may or may not get lucky enough to have it print “perfect!” I didn’t get that lucky, but my second page was only a hair “off” so it wasn’t a big problem. (Note: Just like with the slot templates, make sure you print “actual size” and not “to fit”!)

After my holes were all poked through, I cut some 3/16” stripes of white cardstock and a 1/8” strip to use as a spacer so I could even out how my hinge papers looked. I used the 1/8” strip to add the space between the edges of the holes and the edge of the 3/16” strip. I also added 3/16” strips to the outer [vertical] edges so my slot reinforcements would sit evenly (I also have a layer of cardstock under slot reinforcements – so my tag slots are super reinforced now!). I inked up my slot covers and glued them in place.

Now it was finally time to start thinking about how I wanted to decorate the folio, and which finishing touches I wanted to add. I used my “Royal Purple” StazOn to stamp my butterfly images and to dye my seam binding tie closure. For my main image/cluster, I go over getting permanent ink to bleed out and create the shadow effect in the second video. A helpful “fix” for images that don’t stamp clearly! (Personally, if I were to do this project again, I would add my stamping to the cover paper before adding it to the folio. It was all the pocket layers that caused the stamping issues because it was no longer flat!) Anyhow, even if something goes “wrong,” there is always a “fix.” In this case, I used some 91% isopropyl (rubbing) alcohol to cause my StazOn to bleed. I added my inks to the cardstock, then stamped the image on and fussy cut it out. The flowers and leaves are glued flat to the surface, offset just a touch to give a shadow effect, and the butterfly is popped up on some foam. The rest of the images I just stamped and left however they came out. (I did use a strip of cardstock to protect my seam binding covered hinges when I wanted to stamp across them.) I popped on some of the orange pearls and thought about what I wanted to add to the panel that folds in.

On that third panel that folds in, I didn’t want to just leave it blank, so I added a couple of the tags I had cut out. I glued the middle-sized tag on white cardstock near the bottom horizontally and added a tag in the next size up (second largest) as a flap with a simple tab added on. The “bloom” was stamped using the P13 stamp set that had been in February’s Cards, Tags, & More Kit.

Finally, I decided it was time to add my stitching! I just have a simple blanket stitch around the outside of the folio and some straight stitching along the hinges. I added some extra stitching to wrap up the corners of the folio, and added the last little bits to the decoration – the Prima flowers under the butterfly wings, and the green pearls along the bottom of the tag flap. With all that done, I added my tags to their slots and closed it all up!

Thank you for joining me here in my corner, I hope you enjoyed this folio project and have a chance to check out the videos that accompany it! Don’t forget to check out my Etsy shop to get the discounted cut file!

Stay Crafty, Friends

Corner Scraps can also be found at:

Corner Scraps Instagram

Corner Scraps Facebook

Corner Scraps YouTube

Corner Scraps Pinterest

Tres Jolie can also be found at: