Tres Jolie Kit Club–August 2023 Cards, Tags, & More Kit

Hey, y’all! I hope the weather this month hasn’t been too bad where you are. Fires in Maui and Canada, a tropical storm hitting Southern California, a massive steam cooker over the southern and mid-western United States, 100°F (37.8°C) waters around Florida, and hurricanes forming in the Atlantic – just to name a few of the weather incidents. I think it would be almost easier to make a list of where the weather isn’t causing problems. Wherever you are, I hope you are staying safe!

If you need something to unwind with, give yourself a little crafty break and check out the notecards I created this week using the August Cards, Tags, More Kit (and a bit from the Mixed Media Kit plus one butterfly from the Scrapbooking Kit!) – then grab your scissors and glue and make some yourself! With the card and envelope blanks in the kit, all you really need to do is add a little decoration and you can get a few finished in a relatively short period of time. Be sure to check out my video for the details of how these came together!

PhotoRoom-20230823_164131_1



There really isn’t a lot to these quick notecards – a little adhesive, maybe a medium or two, and they are basically done! Since I wasn’t entirely sure where the project would take me, I started out by putting my patterned paper and some of the Dresden Trim on an adhesive sheet, just so I could turn my papers into quick peel-and-stick pieces then coated everything as well as the unfolded envelopes with clear gesso.

adhesiveSheet gesso

The “Thank You” card was the most involved because I used the stencil and Lindy’s Moon Shadow Mist from this month’s Mixed Media Kit on it. For the notecard, I used some clear embossing ink and powder from my stash with the Prima stencil from the Mixed Media Kit to create a resist on the surface, then sprayed the surface with the Moon Shadow Mist. I added a little stamp, a butterfly I had left from last week’s project, and the sentiment.

clearemboss lindys

For the “Thank You” envelope, I sprayed the Lindy’s through the stencil and added a little bit for blending on the top and bottom flap and some “splotches” with the stenciling. After everything had dried, I used the outline die to make a little window in each of the envelopes and then backed the windows with sections of patterned paper.

stencilenvie PhotoRoom-20230823_164132_4

For the “Hello” notecard, I just adhered a section of patterned paper, a few strips of the Dresden Trim, and a few of the smaller flowers from the kit to the card front. I had thought I would add more, but in the end, all I did was use the ink to stamp the sentiment. I inked the envelope front using a blending brush, added my patterned paper to the back of the window, and stamped the sentiment again.

PhotoRoom-20230823_164131_3

For my third and final notecard, I added a strip of wood plank patterned paper that had the light string print on it to the top edge, then decided to add some random lengths of the Dresden Trim to the lights! After all of that, the only thing I felt was needed was a sentiment – which I stamped with clear embossing ink and added gold embossing powder to.

The “Congratulations” on the envelope was also done with gold embossing powder after I had my window backed and filled. I have a few more bits of the Dresden Trim on the solid patterned paper I used to back the window with, and then I added the decorative die cut into the window cut-out.

PhotoRoom-20230823_164131_2

Thank you for joining me here at Tres Jolie, I hope you have a safe and happy rest of the year and beyond! I will be taking a break from Design Team work because as the temps drop around my neck of the woods, it’s going to become SUPER-DUPER busy! I will still be able to craft – I assume! – but I can’t make a guarantee I could fulfill Design Team requirements and deadlines! (I almost didn’t make it through August because events had unexpectedly longer timelines! Whew!)

Stay Crafty, Friends


Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!


Tres Jolie can also be found at:

Tres Jolie Facebook

Tres Jolie TikTok

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


Tres Jolie Insta Square Frame Tres Jolie Insta Square Frame

In addition to this month’s Cards, Tags, & More Kit and Mixed Media Kit (from previous Tres Jolie Kits), I used:

Gary M. Burlin Co. Ultrafine Gold Embossing Powder, Finnabair Clear Gesso, Ranger Clear Big Emboss It, Ranger Clear Ultra Thick Embossing Powder, Kelly Creates Traceable Sentiment Stamps, BoBunny Sentiments With Love Stamps, Craft Consortium Belle Fleur Clear Stamps, StazOn Olive Green, Scrapbook Adhesives 12”x12” Adhesive Sheets, Art Glitter Glue, Fabri-Tac

Tres Jolie Kit Club–Tags & a Pocket–May 2023 Cards, Tags, & More Kit

Hey, y’all! May is drawing to a close, but that just means it’s almost time for the June Tres Jolie Kit Club reveal! YAY! New supplies!

For my fourth and final May 2023 project, I used the Cards, Tags, & More Kit to make a rather quick and easy pocket to hold my tags. Make sure to check out the process video, then go grab up your kit and make yourself one or more of these pockets to have on hand for whatever you decide to do with them!

card-tag-pocket (10)



Pretty easy, right? A few simple folds and I have a triple-tag pocket!

All of my pockets were folded in half on the long side, and the only pocket that had the extra flaps was the largest “main” pocket.

After I had my pockets cut to size, I started layering them up. I started with the smallest pocket and glued it to the back (the half without the flaps!) of the largest, glued the middle pocket in, then folded the large pocket up and adhered the falls around the back.

To help make sure I had space, I added a second score line – 1/8” spacing – and then used extra tags as placeholders in the pockets so I could wrap my flaps around – instead of just creating a flat fold. My pockets are snug, and if I were to make another pocket that would hold more than three tags, I would have to add a little extra to the flaps of the outer pocket!

pkt-measurements


To help reinforce the tops of the inner pockets, I added a 1” wide strip of solid cardstock – folded in half and cut a hair shy of the width of the pocket – and slid it in place. This helps reinforce the edges and creates a smoother finish. I also added strips of patterned paper to the two outer edges of the pocket to reinforce those since tags would be sliding in and out.

Once the pocket base was complete, the decoration was quick and easy! I used three – maybe closer to 2-1/2 – sheets of the BoBunny paper to cover one side of my tags and both sides of my pocket.

card-tag-pocket (6) card-tag-pocket (1)

When I cut the blue plaid paper, I added approximately 1” extra so I could have a little extra to fold over the top of the pocket and a little extra to fold around the bottom and onto the back. For the ledger print patterned paper, I made sure to have an extra 1/2” at the top to fold over the top of the pocket and tore the bottom edge at the length needed to cover the edge of the blue plaid print paper. Super easy! Especially since I didn’t have to worry about wrapping the sides because I had already done that!

On the pocket front I added a few of the “Transfer Me” decals from this month’s Mixed Media Kit, then using my hot glue gun I popped on the flower buds I had left from my layout last week, two of the wicker hearts, and three of the BoBunny butterfly stickers. Since I have the wings lifted a little on the butterflies, I just gave them a light coating of glue so the sticky backing would no longer be sticky!

And although I hadn’t planned on adding so many KaiserCraft pearls, when I saw how the half circles looked, I knew I needed them all! I added some Diamond Glaze where I was going to attach the pearls – partly for extra hold, partly to give me the ability to slide the pearls around and make sure they were where I wanted them instead of just sticking them on and hoping I didn’t have to try and peel them back up!

card-tag-pocket (5) card-tag-pocket (3)

I laid the blue sections of the patterned paper I had left together, added the “Transfer Me” decals, then started the process of gluing the patterned paper to one side of the tags. It really was just as simple as that! For the backs of the tags, since I didn’t want to leave them the manila color, I added some of the chalk onto my work surface, watered it down, then just dabbed and dragged the backs of the tags through the puddle.

After the tags had dried fully, I picked some of the flower stickers from the BoBunny sticker sheet to add to the front, then decided my tags need some of the banner pieces – so I added three banner stickers!

The final addition to the tags was the pieces of Prima Trim over the tag holes. All I did is cut six of the trim pieces off and glued one to the front and one to the back using hot glue.

Now I have a triple-tag pocket that could be used as it is – maybe add a photo or two to the tags. The backs could have notes added. The tags could be used as a card and words of encouragement could be added to the tags, or the whole pocket could be used in a junk journal or book! Endless possibilities!


card-tag-pocket (7)

Thank you for joining me here on the blog today, I hope you enjoyed this quick and easy tag-pocket project and it gave you some ideas of what you can make using this month’s Cards, Tags, & More Kit!

Stay Crafty, Friends


Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!


Tres Jolie can also be found at:

Tres Jolie Facebook

Tres Jolie TikTok

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


Tres Jolie Insta Square Frame

In addition to this month’s Cards, Tags, & More Kit (+the “Transfer Me” decals from the Mixed Media Kit & the few flower buds from the Scrapbooking Kit!), I used:

Gorilla Hot Glue Gun & Hot Glue Sticks, UHU Stic, JudiKins Diamond Glaze, Ranger Craft Tags

Tres Jolie Kit Club–Mini Pocket Album–May 2023 Cards, Tags, & More Kit

Hey, y’all! For my first May project, I have a mini pocket album inspired by the “Tea Book Ephemera Organiser’s” from Bohemian Crafting! When I saw the original video, I knew I had to make my own little book! Not only is this an adorable little book/album, but it is also easy to put together!

Make sure to check out my video and see it all come together!

may2023-miniAlbum-01



For my cover, I used a piece of poster board from when my kids were in school. It’s flexible, yet sturdy – I’m not very good and guessing the weight of paper, but I do know it isn’t as thick as the 130# cover stock I like to use as card bases!

I cut out a 10-inch by 8-1/4-inch rectangle from the poster board, then on the 10-inch side, I scored at 4-1/2-inches, rotated the cover 180 degrees, and scored at 4-1/2-inches again. You could also score at 4-1/2 inches and 5-1/2-inches if you didn’t want to rotate your cover piece, I only rotated mine to make sure I had the front and back flaps of the cover as close to equal as I could get! This way, if my original cut wasn’t “exactly” 10 inches, my front and back cover would still be 4-1/2 inches, and any “excess” would just find its way to the spine!

may2023-miniAlbum-07


I picked out the papers I wanted to use for my cover and cut four 4-1/2-inch by 3-inch rectangles out of the floral paper and two 4-1/2-inch by 2-1/4-inch rectangles out of the orange-ish paper. I added the extra 1/4-inch to the orange-ish paper to give a little bit of extra to work with to make sure I didn’t have any gaps – which is also why I glued it down before the floral paper! I didn’t glue the paper down to the spine until after I had the pages stitched in, because I knew I wanted to cover all the thread.

After the outer papers were glued to the front and back cover, I poked some stitch holes and added some simple stitches using 6-strand embroidery floss (I used all 6 strands!). Then I picked out the papers for the inside of the covers, cut the background papers just long enough to have the edge hidden by the 3-inch pockets, glued them to the cover, and added the pockets.

may2023-miniAlbum-04 may2023-miniAlbum-05 may2023-miniAlbum-06

I have three different pocket page sizes – 3, 3-1/2, and 4 inches – made from 6”x6”, 7”x7”, and 8”x8” squares of paper. And, regardless of the finished size, they were all made the same – folded in half, then half again! This gives an opening at one long edge of the paper (the top of my pockets) and the two short, outer edges. To seal the outer edges, I didn’t glue them closed, I used leftover strips of the BoBunny paper, solid cardstock, and BoBunny stickers to hold them closed. As an optional step, you can also use a circle punch – or just scissors – to add thumb holes to the top edge of the pockets! I inked the edges of my pages, and since it is chalk ink, I have my pockets a spray of Workable Fixatif to help the chalky finish stay in place.

may2023-miniAlbum-03

After I had the edges sealed, I added a strip of green cardstock to the inside spine and finally stitched my pages to the spine through the holes I had pre-poked using a template I had made to help me keep my pages centered and evenly spaced. Each page has two holes for stitching through – 1/4” from the top and bottom of the pocket – and I just used simple straight stitching to hold them in.

Once the stitching was done, I finally added the papers I had picked for the spine to cover my thread.

may2023-miniAlbum-08

After the pages were sealed, I used more of my scrap pieces –the solid cutoffs stamped with one of Tim Holtz’s newest stamps – and some of the stickers to add some simple decoration to the pages and cover – sometimes adding another wrap around the edge, sometimes creating tabs for the edges. On the cover I also used one of the Tres Jolie Chipboard pieces, coated with clear gesso from my stash, the Faded Jeans Chalk Ink from the kit, and a little clear embossing powder, and with some of the KaiserCraft pearls on the stem.

Thank you for joining me here today, I hope you enjoyed this mini pocket page album and it gave you some ideas of what you can make using this month’s Cards, Tags, & More Kit!

Stay Crafty, Friends


Did you get a kit? Share what you made in our Facebook Group!

Thank you for joining us here at Tres Jolie Kits!


Tres Jolie can also be found at:

Tres Jolie Facebook

Tres Jolie TikTok

Tres Jolie Instagram

Tres Jolie Website

Tres Jolie Subscriptions

Tres Jolie Blog

Tres Jolie YouTube

Tres Jolie Pinterest


Tres Jolie Insta Square Frame

In addition to this month’s Cards, Tags, & More Kit, I used:

Finnabair Clear Gesso, Tim Holtz “Floral Trims” Stamps, Fiskars 1.5” Circle Punch, We R Memory Keepers Tab Punch, We R Memory Keepers Corner Chomper, Hampton Art Clear Embossing Powder, UHU Stic, Art Glitter Glue, JudiKins Diamond Glaze, double-sided tape, Krylon Workable Fixatif, Liquitex Matte Varnish, 3M Durapore Tape